Question about NetGear WGR614 Wireless Router

1 Answer

Port Forwarding I'm trying to portforward - Usally, I am pretty good at it, It's very simple once you get it done once, Looking in attached devices, But I am on a wireless PC, and I was wondering, Why wont it let other networks connect, I am portforwarding correctly, Thanks - Matt

Posted by on

  • Matt Perry
    Matt Perry Nov 29, 2007

    Fixed -

  • kts64 Apr 08, 2009

    im having the same problem, i use utorrent alot, but when i set up the netgear router, it has stop my port forwarding in utorrent , how do i get my router to connect to my utorrent to port forward

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 19 Answers

What kind of wireless router are you trying to port forward on? Also, you may have to enable the domains you want to be able to connect to the router. It all depends on the type of firewall that's built into the router. Let me know the manufacturer and model number and i'll resolve your issue promptly.

Posted on Nov 30, 2007

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can't port forwarding


if you know the model and brand of your router follow the link attached and find your device and it will allow you to follow a simple tutorial
thank you Free Help Forwarding Ports PortForward com

Jan 12, 2014 | Zyxel Computers & Internet

Tip

Great instructions! I consider myself pretty handy and using these instructions...


This advice is for the Kenmore Elite and Whirlpool Duet FRONT LOADER style washing machines. A lot of concerns have been raised about door bellows molding, mildewing, and/or ripping and needing replaced. A replacement bellow isn’t cheap (prices vary, but are around $75-80), so hopefully these helpful steps will eliminate the need to call a repair service and pay the additional labor charges. This is a repair of MODERATE difficulty. Just follow these steps:

1. Unplug the washer.
2. Remove the washer top panel by removing the three torx-type screws (or 7mm) where it attaches in the rear of the washer. The panel should slide back, and then lift off.
3. Remove the operator console by removing the dispenser and the scew(s) behind it. Take a putty knife and insert it under the console seam right above the door. If you push in slightly while pulling outwards the panel pops off. Use care not to pull or damage any of the wiring. You can leave the wires attached and simply lay the console across the top of the washer out of the way.
4. Locate the wire hoop retainer around the rubber door boot. It is located behind the rubber seam where it attaches to the door frame. Follow this hoop around to the bottom of the door opening and locate the wire tension spring. Gently pry this spring apart and pull the wire hoop from the groove. Pull the rubber boot from the frame and push it inside towards the wash tub. You will also have to remove the door boot from the fill tube on the left hand side of the door opening. There is a small wire clamp holding it in place.
5. Remove the three screws that hold the door latch assembly in place. This is on the right hand side of the door opening. You can leave the latch in place as long as you remove the screws and push it inside slightly to remove it from the front casing of the washer.
6. Remove the door by removing the screws holding the hinges in place. Use care to support the door hinges when loosening. They can bend. Set the door aside in a location where it will not get stepped on or broken.
7. Remove the lower kick panel under the door. There are 3 screws under the bottom edge holding it in place. Sometimes the panel can stick. A slight tap on either side will knock it free.
8. Remove the front washer casing by removing the four remaining screws that are holding it in place. There should be two at the top and two at the bottom. Set the front casing aside.
9. Remove the old door boot by locating the large clamp that attaches it to the wash tub. Loosen the 7mm nut and the boot will detach from the tub. Also remove the boot from the fill tube coming from the dispenser.
10. Install new door boot on the wash tub and install clamp. There should be instructions that come with the door boot with guide marks to ensure you align it correctly. Once you have the boot in place, tighten the clamp enough to where it is snug. DO NOT over-tighten or you may damage the tub and or clamp. In most cases the clamp will break.
11. Once you have the boot in place, re-install everything in the reverse order of how I explained to disassemble. Make sure you connect the door latch assembly BEFORE you re-install the outer portion of the door boot. Also, make sure you install the boot completely over the fill tube. There should be a ridge on the tube where to stop. Sometimes the tube is not inserted all way into the boot and water will leak behind it. The clamp is always difficult to get back in place. If you cannot get the clamp to go back over the tube, you can live without it. Some newer models do not have them installed. Just make sure it is a snug fit where the rubber boot fits ALL the way back to the plastic ridge on the tube.
12. When you get the point where you are ready to install the door boot back over the frame of the door opening ensure you fit it snugly all the way around the door. Beginning at the top of the door, start inserting the wire hoop back into the groove. Make sure to wire spring points towards the bottom. As you work your way around the door to the 4 and 8 o'clock positions, you will need to maintain some constant downward pressure while pulling the spring apart in order to snap it back into place. It would be advisable to use a second set of hands to hold the wire hoop in place while doing this as it has the tendency to want to come out of the groove.
13. Once the door boot is back in place, re-install the operator console and washer top.
14. At the operator console, select DRAIN SPIN, NO SPIN and press any button under OPTIONS 4 times (has to be the same button, though). This will place the washer in diagnostics mode. You should hear the door latch lock and "C00" will be displayed on the console. The washer will run through a series of tests filling the tub, tumbling, draining, and then a final spin. If you do not wish to wait for the test to complete you can press CANCEL at any time. The test checks out everything and takes about 15 minutes. Look for any leaks.

I hope you find these instructions helpful and good luck to you.

on Oct 14, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Trying to replace wheel bearing front


r we talking about an 05 equinox?if youve ever done one its a pain usally rusted in place . can try a air hammer ,once the bolts and axle nut are removed..to knock it free ..I've had to press them out

Jun 24, 2012 | 2005 Chevrolet Equinox

1 Answer

How do i install and set router ip so it cant work


power on the router

1) plug rj45 (ethernet) cable into router, plug other end into laptop or pc

depending on how many ports this router has and how many cables you have (ethernet)

if you only have one ethernet cable. follow phase 1

open up internet explorer

insert the ip address of the router: 192.168.1.1

uername: admin / administrator
password is usally:admin / pass /password or sometimes just blank

once logged in, follow the wizard, which will be pretty simple to complete

let me know how you get on

Mar 08, 2011 | Linksys EtherFast Cable/DSL Router

1 Answer

I cant change my routers password? I cant log onn to the routers webpage


press and hold in the reset button on the back of the router for 10 seconds, once you have done that, open a browser and type in 192.168.1.1 and it will ask you to login, username is usally admin and password is usally password.

Oct 30, 2010 | Linksys Wireless-G Broadband Router

1 Answer

I lost my pass code of sony ericsson K 610i. How can I get it back?


Try using the last 4 digits of your phone number. I'm pretty sure that will do it. If it doesnt, the defualt codes on cells are usally real simple like 1234. They set it up easy and thern expect you to come and change it to something harder. That in mind, you should be able to get in minimal effort. Good luck.

Oct 28, 2010 | Sony Ericsson K610i Cellular Phone

1 Answer

How do I find the ip of a network attached snap server 1100?


you usally can, if you go into your router or modem....
it usally has "Attached Devices" if you go into that ot will show all of the networked devices or computers, with their ip.

Oct 16, 2009 | Snap Appliances 1100 (5325301556-ob)...

1 Answer

2001 Ford Winstar Theft light on


When the battery was replaced it possibly set off the anti theft system for your vehicle, check your owners manual for instructions on resetting the system its usually pretty simple, also check your fuses, they could have just went out during the battery change. It should be pretty simple and quick to do. Good luck.

Jun 20, 2009 | 2001 Ford Windstar

1 Answer

Portforwarding using a Motorola SBG900 modem


Go to portforward.com,find your router in the device list and follow the instructions. Works great for me.

Oct 12, 2008 | Arris SURFboard SBG900 Wireless Router...

Not finding what you are looking for?
NetGear WGR614 Wireless Router Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top NetGear Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2263 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Michael Galve
Michael Galve

Level 3 Expert

1269 Answers

Are you a NetGear Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...