Question about RCA R56WH76 Projection Television

1 Answer

RCA The tv will not turn on at all. We took the tv to a repairman he he said it was the power supply, it was replaced but soon broke again. The tv work fine as long as we kept the tv on. We made the mistake when we turned it off now the tv will not come back on. Neither color light apears once the tv is pluged up and trying to turn on. Any answers?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 61 Answers

It could be a 2200 35v cap in the high voltage power supply,its behind a u shaped heat sink,it is green in color,if it is bad the top of the cap will be pushed up

Posted on Mar 07, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Have a RCA projection tv model D52W59 and it just made loud pop and turned off. Now will not turn on. Do you have a idea of what happened?

Your power supply board is dead, u know basic electronics' and soldering? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it top,or puff up on it top.Replaced these gases leakages capacitors will get your TV power stable,and work again.Or tries websites like, to buy a whole refurbish power supply board for the replacement.
Hope this will help in solving the problem....

Aug 09, 2011 | RCA Projection Televisions

1 Answer

I have a 52'' HDTV Projection RCA tv and it went out no pic or sound so i UNPLUGGED and had to wait a month later which was today so I turned on and it had beautiful picture for about 20 min then it turned...

U have tools,can u do basic soldering,and understand basic electronic?Yes.Take ur tv aparts.Take out the DM power supply board check for dying,soon to be dead capacitors.These capacitors are alway bulges or puffing up on it tops.U replaced these dying capacitors,u will solved this power light blinking problems.Try website like might still sell those prepack capacitors repair kit for the RCA DLP tv DM power supply board.

Nov 17, 2010 | RCA HD52W56 52" Rear Projection HDTV

1 Answer

Turned on tv no picture only sound then i heard a pop and smelled burning tv turned itself off. 5 min tried turning on tv again nothing happened tv does not turn on at this time

Your RCA TV needs serious troubleshooting. Burning smell is from HV transformer or resistors smoking.

Most likely power supply and/or high voltage circuit or convergence circuit. Many times RCA have multiple or secondary faults that occur with HV or convergence failure.

Repair of RCA HV or convergence usually requires exact manufacturer parts and upgrades or repair in power supply. I would not advise trying this repair without manufacturer support for correct part numbers and service bulletins.


Feb 28, 2010 | RCA Projection Televisions

1 Answer

Tv turns on and sparks in back and shuts off

box about three inches high? does this have a red wire coming out the top. Sound like the flyback, it and the horizontal output transistor need replaced

Nov 30, 2008 | RCA HD56W66 56" HDTV

1 Answer

HD52W59 Convergence Power Supply

you can get the replacement ITC222 convergence power supply board at the following link. They have one at promotional sale price this week also under the sale items category.

Sep 07, 2008 | RCA HD52W59 HDTV Projection Television

1 Answer

Replaced parts--here's where we/re at

Check all tubes Red ,Green look for crack or broke some even leak fluid out on board.

Aug 29, 2008 | RCA D52W19 52" Rear Projection Television

1 Answer

RCA P61927 61 in. Rear Projection Television

get a tv repairman out to make sure of the problem, it might be xomething simpler he can fix but it sounds like the convergence board is out

Jun 21, 2008 | RCA P61927 61" Rear Projection Television

1 Answer

RCA MM52110 tv

I had a repairman out to look at mine today. He said it was the high voltage protecter kicking off the TV as soon as you turned it on. $400 to $600. to repair.

I love this TV but guess I'll go shopping for another plasma. I have one Plasma TV in the bedroom 50" Samsung (top of the line) it doesn't have as good of a picture as my old RCA.

Jan 31, 2008 | RCA MM52110 52" Rear Projection HDTV-Ready...

1 Answer

RCA light comes on and then goes off. Tv doesn't turn on

Is this your set? If it is, there could be a bad solder connection in the start up power supply or there is a resistor that will get loose or change value. It gives the power supply the start up pulse from the flyback transformer. there are no user replaceable parts inside this set, and the longer you wait to get it serviced, the more its going to cost. Unless you have a service manual and understand how the SMPS works, please play it safe and call in a pro to assist you in this repair. Good Luck Please do not forget to rate this thread.

Dec 09, 2006 | RCA D52W20 52" Rear Projection HDTV-Ready...

Not finding what you are looking for?
RCA R56WH76 Projection Television Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Projection Televisions Experts

The Wyzzyrd

Level 2 Expert

83 Answers

D. E. Hev

Level 3 Expert

1059 Answers

Ron Dufek
Ron Dufek

Level 2 Expert

397 Answers

Are you a RCA Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides