Question about Televison & Video

1 Answer

Problem with connecting my computer to television

My television is a SAMSUNG LCD LN-T3232H and I'm unable to have a good quality of image when I plug my computer on. On my computer I set my resolution to 1366x768, I connect it to the LCD panel via a VGA plug and the image is always jumping of few millimeters, what the hell ? So, I start the investigation and I found that refresh is set to 30Hz on my computer an dI have no other choice but 29Hz... I read the instruction manual of the monitor and I see that I MUST set my computer to display and image of 1366x768 with a 60Hz vertical refresh, but I CAN'T ! So..what can I do ???

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I don't know much about the subject, but when I had my HDtv connected to my computer I had to play a bit with the TV menu. In that menu, there is a control about computer connections, and that's how I got the image straightened out. I hope this help. Bye. Juan Melgar

Posted on Dec 02, 2007


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer


The problem might be to its backlight inverter section circuit board.

Oct 02, 2013 | Samsung LN-T3232H Television

1 Answer

Samsung lcd tv has sound but no picture

Do you have back lighting. Shine a light on the screen. If you can barely see a picture the set has no backlight but video is good. This would rule out the main board. Not shure if this set is LED backlight or flouresent tube back light. If flouresent tube check for voltages to inverter board. 24v or 15v. They are marked on the board. If voltages are there likely inverter board. or could be power brd. Check pricing on new tv.

Oct 02, 2013 | Samsung LN-T3232H Television

1 Answer

Screen goes blank

Will you please provide more details about the problem you faces with this TV?

Oct 17, 2012 | Samsung LN-T3232H Television

1 Answer

Samung LN-T4061F - Dim Picture

Does it look like a dim black swirling cloud with very faint images?

Mar 24, 2012 | Samsung LN-T4061F 40 in. LCD HDTV

1 Answer

Ps3 wont work on my ln t3232h says not supported mode

Very easy fix guys. all you gotta do is use either your component cables or hook the ps3 up to a different TV than change you output settings from 1080 to 720p, thats the reason your not getting an image is the ps3 is set to a 1080i or 1080p output, but the tv is only capable up to 720p. good luck ^^

Jun 26, 2011 | Samsung LN-T3232H Television

1 Answer

I have samsung 32 inch lcd tv model #LN-T3232H and serail# AJD23CRPA00178K now the problem is that all it does is click like it want to come on it does the sound over and over but never turn on the stand...

It may have power supply problem due to bad DC power supply filter caps, or main board, backlights inverter board. It may be detecting shorted circuits so it goes into shutdown/restart mode
Please read my guide so you will know what to look for inside. See pictures of failed SAMSUNG TVs also.
If you are going to DIY and have proper tools, electronics knowledge, and know safety precaution then please read on:

Basic LCD monitor and TV troubleshooting guide:
Failed TV and Monitors pictures:
Learn about bad caps:
Capacitors kit: he can make you a set of caps.
Or, just make sure to use caps with low ESR, 105c, high ripple current and long life rating such as PANASONIC FM or FC series.
Please post back what you find.

Mar 17, 2011 | Samsung LN-T3232H Television

1 Answer

How can I install my Samsung LN-R3228W LCD TV to a PC?

Hi most LCD TV's that have PC connectivity will be either fitted vith a 15 pin VGA connecter or DVI cinnector. then it is simply a matter of selecting the appropriate input. for connection to your computer - simply move the VGA cable from your Computer monitor and plug it into your tv

Aug 10, 2010 | Samsung Televison & Video

1 Answer

I have audio, but no picture: when I first turn the tv on, about half of it has image for a second, then it all goes black. I've tried replacing the t-con board, and assuming I wasn't sent a faulty board,...

usually the back right on but no picture, and the 12v to t-con ok. May be the t-con failure. But even it is true, you have to ensure it match with the panel (what model of the panel the t-con use for). LNT3232HX/XAA has 8 different versions, use 8 different panels and 10 different t-con board.
Also the main board or LVDS cable defective, could cause this issue.

Jun 10, 2010 | Samsung LN-T3232H Television

1 Answer

Best Picture Quality

Check this link out. I think it should give you all the info you need for optimal picture settings.

Nov 13, 2007 | Samsung LN-T4061F 40 in. LCD HDTV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

626 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75846 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers


Level 3 Expert

82322 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides