Question about Panasonic CT-32HXC14 32" TV

2 Answers

Panasonic HDTV 10801 BBE TAU

Our panasonic 36 "Panasonic HDTV 10801 BBE TAU was turned off. ONe minute later we try to turn it on again and it does not turn on. It does not make any sound. No picture, not sound not even a sound that it is turning on. Can someone tell me what to do. My husbnad wants to open the tv and see why is not working but I Do not trust him doing these type of "fixings" since he usually break things and damages them. SInce this is a TV that has never had a problem we were surprised. Please help~!

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

We own a Panosonic HD TV model 10801. It is hooked in to a cable box, and also to an hd sound system. To operate, we turn each component on individually through the cable box remote. Likewise, to turn off we do each individually.

Here of late, when you go to power one component, the button actually turns on something different. For example, if I power up the HD sound, and then try to turn on the TV, the buttons actually end up turnif off the sound system. Likewise, if I try to turn on the TV on the remote, it may actually turn off one of the other components.

When I reboot the cable box, things work fine for a few days. Then, we are right back to the problem. Is there possibly a software conflict through the cable box, so that when they send updates, it creates this problem? Any ideas?

Posted on Jan 11, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 298 Answers

Unplug it for a few seconds and
plug it back in if this doesn't
do it the call in a technician
may be HV or PWR Sply problem

Posted on Nov 29, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Panasonic HDTV 1080i TAU BBE projection TV,I can't get a remote to work with it.


Check first to see if remote works---most shops or Radio shack have a remote tester---point remote at it and push a button and tester will indicate if remote works----some digital cameras will also work for this.

If remote is good either a problem with the remote receiver on front of set or the remote circuit inside the set.

Mar 18, 2012 | Panasonic Televison & Video

1 Answer

By tv is stuck on standby and now wont turn on it first started with a sound like its blinking then wouldnt turn back on plse help me


one or more lights on the front should blink an error code

Set likely has either a problem with its power supply board or something is pulling voltages there down--

Power supply board is the place to begin

Mar 16, 2012 | Panasonic Televison & Video

1 Answer

I have 36" Panasonic CT-36SX12 TAU series. I had it repaired less than 3 years ago .and the same problem happened again As soon as turned the TV off it wouldn't turn back on .I was told this was the...


I would check the remote control by taking it out of the room first. If that is not the problem, it is likely to be a dry joint in the power supply that is "arcing" and causing this problem.
Re soldering the heavy components on the power supply board may fix it.

WATCH OUT FOR CHARGED UP CAPACITORS - THEY ARE LETHAL WHEN CHARGED!

Oct 16, 2010 | Panasonic CT-36SX12 36" TV

1 Answer

Power supply broken??


Without more information, it is difficult what to tell you. It is not likely to be something as simple as a fuse. A common failure is the horizontal output transistor if it is a CRT based set. There are other common faults as well. Try turning on the set and report here any symptoms you detect. For example, is there a standby light? Does it blink? Do you here a click when attempting to start the set?

Try to provide answers to the above and I should be able to give you a better idea.

Dan

Mar 20, 2009 | Panasonic Televison & Video

1 Answer

PANASONIC 36" TAU --- NEED HELP


Sounds terminal. Companies build things with "planned obsolescence" in mind. In other words. You buy a TV today, and the warranty says it's good for 4 years. 4 years and 3 months later, it dies.

I hope someone else can help you.
Good Luck!

Apr 01, 2017 | Panasonic CT-36D32 36" TV

1 Answer

Panasonic TV will not power up when power button pressed


caps in power supply failed look for 1000 mfd 16 volte caps.

Apr 13, 2008 | Televison & Video

1 Answer

Panasonic 36HX41E Tau 36" HDTV Won't turn on


i think line out put transformer is leaking high voltage.if u r nat an technetion then dont try to on tv agin because high voltages can damage several costly ic in the set.

May 25, 2007 | Panasonic CT-32HX40 32" TV

Not finding what you are looking for?
Panasonic CT-32HXC14 32" TV Logo

1,126 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

5554 Answers

Demonic-2011
Demonic-2011

Level 3 Expert

509 Answers

The Knight
The Knight

Level 3 Expert

75846 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...