Wii Fit Board stopped responding to 'jump' on Ski Jump Game?

Just re sync the remote. I had to do it earlier again when I was trying to fix my Wii Fit Balance Board. :)

I've had my Wii Fit for about 2 months. My wife and I were really getting into it, I was mad because my Mii was super chunky; I decided that I was going to do something about it, played it for about a week and then stopped. We turned it back on this past weekend and it still had our weight and stuff, but all of our scores for things like the obsticle course, ski jump, downhill ski, and all the others were gone. Yes, it can lose your data. Should it? No. Don't feel too bad about it though, it's a fun game and very addicting; and when getting back into shape is fun, it's doing it's job. Have fun!

Respectfully,

Don

You get off press a wait for it to say step on and then get on. If it keeps saying it after you get off, take out the batteries and get a new battery pack, don't step on it at all until it loads.

Fiend your solution direct from nintendo. Here is your solution....
http://www.nintendo.com/wiiconsole/prob676ijt65/solution

milonkoli1

We had that issue one game and the problem was that we had multiple users all using the same Mii character but weighing between a range of 60lb between people. Because the fit uses weight to determine if you are actually jumping (since you're not supposed to break contact with the fit board) if one user weighs more than the previous person who's weight was used as the calibration, the second person will seem to be in a constant 'jump' state. Try resetting the weight for the Mii you're using, or just recalibrate between users. This totally solved our problems!

Make sure you are trying to sync it when the Wii Fit game asks you to. It will say "place you wii fit board on the floor and turn it on" or something like that. and then when it asks you, turn it on, and it should sync.

otherwise, try it on another wii if you can... if it works on another wii then its your wii.. if it doesnt work on another wii then it is you Wii Fit Board.

that somtimes happens if you want it to synch press the synch button on the wii and the balance board for about 5-10 secs then once there synched press (A) on the wii controller and theat should do it thats how i got mine to work Hope this helped :)

Nintendo had me set and reset the console and then the Wii fit board. They also had me take out the batteries from the Wii fit board, and repeat the reset. Apparently this works in many cases. IT didn't work for me, so now I'm bringing the unit in for repair. I am just a week past my 90 day warranty- they are charging me 47 bucks to fix it! What a sham! that's half the cost of what I paid for the darn thing!

I called Nintendo and they said there are sensor problems with some of the boards. We had to send ours back, free of charge (they even paid for shipping) and had a new one within 12 days. 1-800-255-3700 is the repair and troubleshoot #....

I found this on a related post, but it should help:

Hi,
After posting my message here I started to fiddle around with the wii fit again and went slowly step by step through the synchronisation steps. Voila it works! what I had done wrong was that I did not press the red synchronisation button for the wii console when the blue lights (after pressing the sync button) on the wii fir board started to flash. you must do this when they are flashing. Hopefully you are as lucky as me and it will work for you too.