Searching for tv codes

You can try code search on your Apex remote to find something that handles some or all functions of your Sanyo TV. If a search through all codes stored in the remote fails, you may have to try a different universal emote. All universal remotes do not store all possible codes.

The code(s), if applicable, are stored in the remote. Use the code search feature to find one that will handle some or all functions of your Apex STB. If unsuccessful, you may have to try a different universal remote. All universal remotes do not store all possible codes.

About 17,100 results (0.72 seconds) Search Results

GE Universal Remote Codes and Instructions ' direcTutor

www.directutor.com/content/ge-universal-remote-instructions
Enter the three or four digit code for your device using the number buttons in the GE Universal Remote. After your code is entered the INDICATOR LIGHT will ...Missing: naxa

Apex Digital TV Converter Box DT250 code ' ManualsOnline ...

tv.manualsonline.com/support/...digital/tv-converter-box/code-1082992
Nov 15, 2008 - Brock Search data: Universal remote control code apex dv converter... 4 I NEED CODE FOR APEX CONVERTER BOX FOR GE UNIVERSAL ...

Trouble programming Universal Remote to a DTV Converter ...

www.fixya.com/.../t2045188-trouble_programming_universal_remote_d...
Apr 21, 2009 - So I'm trying to program my GE Universal Remote to work with my Digital Stream Converter Box but I can't find the codes to do it... If someone ...

Control It All With Universal Remote Codes - Digital Landing '

Hello
There is no warrantee for the remote control for any company's set. A universal remote should work with your Apex tv. I'll give you the model and codes for the remote that suit to your apex TV. Buy one and match it to your TV.
PHILIPS [CL 034] universal remote control.
Codes are:-
0023 0223 0123 0741

Proceedings

Direct Code Entry

1. Press and hold the CODE SEARCH

button until the red indicator stays

on, then release the CODE SEARCH

button.

2. Press and release the desired Mode

button (TV, VCR, etc.). The red

indicator blinks, then stays lit.

3. Enter the 4 digit code from the code

tables. Note: after a valid code entry,

the red indicator turns off. For an

invalid code, the red indicator

flashes.

4. With your device on, press

CHANNEL UP. If the device

responds, no further programming is

required. Note: If some buttons do

not operate your device, try one of
the other codes for your brand.
OK.

Is your TV older than the remote's programming date by at least 6 months? The code you need for a newer TV may not be included in the remote.

If the TV is compatible with the remote codes, then try the Apex codes: 1037, 1043, 1050, 1071 . You can also try the manual coding. Turn on the TV (turn off other devices that may respond to the IR signal). Then press and hold the TV button on the remote (the illuminated TV will turn on). While holding the TV button, press and hold the On/Off button. The illuminated TV will turn off. Continue to hold both buttons for at least three seconds, until all of the component names light up. Then release both buttons (the TV will remain illuminated). Press the On/Off key repeatedly (up to 200 times) until the TV turns off. Press Stop to save the code. Try to use the remote to control another function on the TV. Repeat the manual search if the code doesn't control the TV completely.

If the TV light blinks 4 times and goes off, you have searched through all of the codes. The remote exits the manual search at that point.

I hope this helps.

Cindy Wells

Programming a Device using Code Search:

1. Manually turn ON your device (TV, VCR, Cable Box)
2. Press and "HOLD" CODE SEARCH
3. Press and release the device button you want to set up (TV, VCR, Cable Box) However, if you are using AUX for a device, press and release AUX first and then the device button for the type of device to be programmed (TV, VCR, or Cable). The selected device button will flash once.
4. Release CODE SEARCH.
5. Press OFF/ON repeatedly until the device turns off (you may have to press up to 100 times at a rate of once per second).
6. Once the device turns off, press and release ENTER.
7. With the device on, press any other button. If the device responds, no further programming is required. If the device does not respond, repeat steps 1-6.

Programming a device using the Code Lists:

1. Find codes for each device and brand below.
2. Press and "HOLD" CODE SEARCH.
3. Press and release the TV, VCR or Cable button you want to set up. If programming AUX for a device, press and release AUX first and then the device to be programmed (TV, VCR or Cable). When the selected device button flashes proceed to the next step.
4. Enter the three digit code (apex is not listed for this remote)
   
   
5. Release CODE SEARCH.
6. With the device on, press another button, for example CHANNEL UP. If the device responds, no further programming is required. If the device does not respond, repeat steps 1-5 using another code number from the lists.

For the APEX TVs you must use the search for codes method in the universal manual. Phillips usually keeps these on their website.
Check out http://www.urc.philips.com/ to search for the manual online.

You don't need the whole manual for the Philips Magnavox remote fortunately.

If you want to reprogram it for the Apex TV, follow my directions exactly.

1. Hold down the Code Search button (on the remote) until the light on it turns red and stays red.
2. Let go of the Code Search button.
3. Make sure to switch modes at this point to which device you want to program, I'm going to assume TV Mode since your post says "Apex TV." If you need help with Apex DVD codes, I can answer that one too :)
4. As you Press the mode button and release it, the light should blink for a bit, so keep your eye on it because after it's done blinking it'll stay red.
5. At this point the remote want's you to press a sequence of numbers also known as Code[s] or Code Entries. Either way these are what are in a table inside the manual that you lost.
6. I'm going to give you two codes in case one doesn't work: 044 and 335 (one of those hopefully will work)
7. If the code worked you'll know right away because the light will get mad and start blinking again, otherwise if it DID work, it'll just turn off (the light will anyway).
8. That's it, I reccomend you test out your remote with the TV now and make it everything works. If something doesn't, try the other code. If it still doesn't work right, I'll give you some more codes.

Hope that helped,
-Cheers-

Direct Philips Magnavox Universal Remote Code Entry PM335
1. Press and hold the Code Search button until the red
indicator stays on. Release the Code Search button.
2. Press and release the desired mode button (TV,
DVD, etc.).
The red indicator blinks, then stays lit.
3. Enter the 3 digit code from the code tables. Note:
after a valid code entry, the red indicator turns off.
For an invalid code, the red indicator flashes.
4. With your device on, press CHANNEL Up. If the
device responds, no further programming is
required. Note: If some buttons do not operate your
equipment, try one of the other codes for your
brand.
APEX 044

Try these APEX TV codes 0023 0223 0123 0741 Thats from the CL034 Code book

digitec code remote