Question about Computers & Internet

2 Answers

Ms-6119 front on/off. reset wires disconected from motherboard

Help me replug the wiring that atthach the switches from the front panel to the motherboard.

Posted by on

  • 1 more comment 
  • Anonymous Mar 28, 2009

    ms9158e+ pwer led

  • Anonymous May 25, 2009

    i need diagram on where to put the on/off, reset, and standby wires on the motherboard and what order

  • Anonymous Mar 16, 2014

    Please help me connect my front panel wires to my motherboard... its mcp61pm-gm

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Front panel wiring diagram

Posted on Feb 10, 2011

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 56 Answers

Http://stason.org/TULARC/pc/motherboards/M/MICRO-STAR-INTERNATIONAL-CO-LTD-Pentium-II-MS-6119.html

If the leds dont light up rotate the plug 180 degrees.
The above site shows you where to place the plugs.

Posted on Nov 29, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Msi ms 7297 ver.2.1 front panel help


With the motherboard in the case and the back of the case away from you the front panel pins are on the front left of the motherboard. They will have simple labels;

PWR power
RST reset
HLED hard dive LED
PLED power LED
You can get it wrong without breaking it so just keep trying until the right buttons and lights work.

Jan 06, 2013 | Intel Motherboard

2 Answers

Front panel connections


I don't find the Front Panel header pinout online, nor do I have an MSI MS-5191 in the shop.

I would suggest using one the LED lights with two wires.
(3-wire is a dual color LED)

There are two rows of pins. Usually the Power On switch, Power On LED, and Speaker; are on the same row.
HarDDrive activity LED, and Reset Switch are on the opposite row.

Speaker has 4-pins designated for it. All the others use 2-pins.
(Unless the PWR ON LED is a dual color jobbie)

Touch two pins next to each other, in the same row; with the 2-wire LED.
Start with finding the Power On switch first.

Usually the top row 1st two pins are Power On LED (Light)
Next in line are the 2 pins for the Power On switch.
Bottom row 1st two pins are usually HarDDrive activity LED (light)
Next 2-pins are usually Reset switch.

May not apply to a motherboard old enough to use a Socket 7 processor socket.
There may be 18 to 20-pins.
Bear in mind that many are not used, and probably 4 are for an internal speaker, for hearing BIOS Beep Codes.
May be two separate Front Panel headers.

Once you find the two contact pins in the Front Panel header, for the Power On switch; I would put the Power On switch wires on.
The small pin connector on the wire/s, will keep you from accidentally touching these two pins again, when the computer is on.

Now you have the two pins for the Power On switch, and the computer is running; then keep touching 2-pins at a time with the LED. (Light Emitting Diode)

LED stays on? You have the Power On LED (Light) pins.
LED blinks? HarDDrive activity LED (light) pins.
Computer restarts? Reset switch pins.

Look for abbreviations near the pins in the Front panel header.

PWR, Pwr, Pwr On, Sw, and SW; are just some of the abbreviations for the Power On switch.

HDD LED, and HDD are two for the HarDDrive activity LED. (Light)
(If it states HDD SW it is the Power On switch. Weird old way of marking)

RST, Reset, and RSW, are for the Reset Switch.
(Reset Button)

If you see 4 pins marked with a bracket ( [ -> Turn so it's horizontal), these are for the internal speaker.

Type MSI front panel connector in your search bar, and look at -> images. See if you can find an image of your MSI Front Panel header pinout.

You can bet MSI carried out that Front Panel header pinout, on other MSI motherboards, besides the MS-5191.

The MSI MS-5191 may have been a motherboard made by MSI, especially for a pre-built computer manufacturer, and not listed on their website as an OEM motherboard.
(Original Equipment Manufacturer)

Won't have the Front Panel header pinout, listed on MSI's support website. (Doesn't)
But you can bet there IS an OEM motherboard made by MSI, that the Front Panel header DOES match.

May be different expansion slots, or motherboard chipset, or whatever; but the same Front Panel header pinout.

Regards,
joecoolvette

Jan 05, 2013 | AMD MicroStar MS-5191 Socket 7 mATX...

1 Answer

I am looking for MCP61PM-HM (Nettle) 9 pin front panel power header diagram


This motherboard Adam?

http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&docname=c00906137

Can't help you.









OH, I'm just KIDDING!

The front of your computer is the Front Panel.
The area of pins on the motherboard, that the main wires from the Front Panel go to, is the Front Panel header.

On the motherboard the Front Panel header is marked as PANEL1.
Scroll the page down, until you come to Motherboard layout.
Click on the + sign to the left of it.

Shows an illustration of the motherboard.
Bottom/Right corner is PANEL1. The black rectangle that is sitting vertically, in the motherboard photo.

Motherboard installed in computer case, the Front Panel header is two columns of contact pins.
FOUR on the Right side, FIVE on the Left side.

I don't know the actual numbering of the pins, so I'm going to number them myself;

Starting on the Left side at the Top, going down,
Pins 1, 3, 5, 7, and 9.

Starting on the Right side at the Top, going down,
Pins 2, 4, 6, and 8. There is NO Pin 10.

A) Pins 1 and 3 are for the HarDDrive activity LED (Light)
Pin 1 is for the Positive ( + ) wire.
If the HDD LED is dim when the harddrive is active, switch the wires around.

B) Pins 5 and 7 are for a Reset switch, IF a Reset switch is used. If not, do not connect to them.

C) Pin 9 is N/C. Not Connected. It was a +5 Volt power for the factory.

D) Pins 2 and 4 are for the Power On LED (Light)
Pin 2 is for the Positive ( + ) wire.
If the Power On LED is dim when the computer is on, switch the wires around.

E) Pins 6 and 8 are for the Power On switch.

F) NO pin 10, just a blank spot.

How to find out what wires are what, in that Front Panel harness connector?

Follow the wires from the connector, up to the Front Panel.

Front Panel removed it is easier to see where the wires go.
You can follow the color code of the wires, and see which twisted pair go up to the Power On switch.

You can also see which ones go to the Power On LED.
(Light Emitting Diode, so it is a light)

Reset switch, (IF there is one), same thing.

The only pair of wires that will be left is the HDD LED wires.
HarDDrive activity LED.

The 9-pin plug will have to be CAREFULLY cut apart. Separate the wires, AND their metal terminals. (WATCH your fingers!)

For additional questions please post in a Comment.
Regards,
joecoolvette

Jul 04, 2012 | Gateway MCP61PM-GM (4006254R) Motherboard

1 Answer

Mercury Motherboard PI845GLM-L manual needed for wire connections... please help me


If my information is correct;

Orient the motherboard so that we are both looking at it in the same direction,
Processor to the top, Ram Memory slots to the right, white PCI slots to the bottom.

The front plastic panel of your computer that has the Power On button, Harddrive activity LED light, and Power On LED light, is the Front Panel.

The area of pins on the motherboard, that the wires from the Front Panel go to, is the Front Panel header.

The Front Panel header is all the way down on the right corner. Panel 1.

The Front Panel header, or Panel 1, is a rectangular block that is positioned lengthwise, across the bottom of the motherboard.

There are 4 pins across the Top, and 5 pins across the Bottom.

The pins are numbered.
They are numbered Even across the Top row.
Pins 2, 4, 6, and 8. (There is NO Pin 10. Just a blank spot)

They are numbered Odd across the Bottom row.
Pins 1, 3, 5, 7, and 9.

A) Pins 1 and 3 are for the HarDDrive activity LED light. (HDD LED)
Pin 1 is for the Positive wire. ( + )
{ Pin 2 is for the Negative wire. ( - ) }

If the LED light is dim when operating, turn the wires around.

B) Pins 5 and 7 are for a Reset switch, (Reset button), IF a Reset switch is used.
Pin 5 is for the Negative wire

C) Pin 9 is RVSD_DNU
Reserved Do Not Use.

D) Pins 2 and 4 are for the Power On LED light.
Pin 2 is for the Positive ( + ) wire.

If the LED light is dim turn the wires around.

E) Pins 6 and 8 are for the Power On switch.

For additional questions please post in a Comment.

Regards,
joecoolvette

Sep 16, 2011 | Mercury P4VM800M7 Motherboard

1 Answer

How to hook up the face plate of a emachine w3400 Wich includes 3 wires 1 power butten and 2 led lights


Look at the pinout of the Front Panel header, of the eMachine W3400's motherboard.

The plastic front of the computer is the Front Panel.
The area of pins on the motherboard, that the cables (Wires) from the Front Panel connect to,
is the Front Panel header.

The motherboard for an eMachines W3400 desktop computer is an MSI ms-7145
(Micro Star International)

Orient the motherboard in your view so that we are both looking at it the same way.
Processor to the Top, Ram Memory slots to the Right, white PCI slots (3) to the Bottom.

JFP1 is the Front Panel header.
(Junction Front Panel 1)

JFP1 is on the Bottom Right corner. There are two columns of pins arranged vertically.
(The JFP1 header runs parallel to the Right side of the motherboard)

The Left side column of the JFP1 header is numbered Odd.
Starting at the Top and going Down, the pins are numbered;
1, 3, 5, 7, and 9

The Right side column is numbered Even.
Starting at the Top and going Down, the pins are numbered:
2, 4, 6, and 8.
There is NO Pin 10

A) Pins 1 and 3 are for the HarDDrive Activity LED light. (HDD)
If the LED light is dim will operating switch the wires around

B) Pins 5 and 7 are for the Reset switch. (Reset button)
> IF Used

C) Pin 9 is Not used. (NC. No Connection)

D) Pins 2 and 4 are for the Power On LED light (If dim switch the wires around)

E) Pins 6 and 8 are for the Power On switch. (Power On button)

Trace the wires back to the Power On switch. Even if it means temporarily removing part of the Front Panel to see.

Same with the LED lights.
See which wires go to the Power On LED, and HDD Activity LED. (Harddrive Activity LED)

Follow the 3 wires, and tell me where they go to on the Front Panel.
USB port?
Memory Card Reader?
Firewire port? (a1394)

Nov 27, 2010 | AMD eMachines Desktop System w/ 17'' CRT...

1 Answer

Need wiring connection diagram for Power Switch to Motherboard for EMachine W2925 model. Wires were disconected accidentally while cleaning inside of tower


micha219, the eMachines W2925 desktop computer uses an FIC motherboard.
First International Computer { Inc }
The Model Number of the FIC motherboard is VC37.
FIC VC37.

Disregard the following if you are aware:
The plastic front of your computer is the Front Panel.
The area on the Motherboard that the cables (Wires) from the Front Panel connect to, is the Front Panel header.

Processor to the Top, Ram Memory slots to the Right, the Front panel header is in the Bottom Right corner.

It is a rectangular shape with two columns of pins.
The length goes up, and down on the motherboard.

The pins on the Right side of the Front Panel header are numbered Odd.
The pins on the Left side of the Front Panel header are numbered Even.

There are 4 pins on the Left side.
There are 5 pins on the Right side.

Starting at the Bottom on the Right side going Up;
Pins 1, 3, 5, 7, and 9.

Starting at the Bottom on the Left side going Up;
Pins 2, 4, 6, and 8.

A) Pins 2 and 4 are for the Power On LED light.
(If after connecting the LED light is dim, reverse the wires)

B) Pins 6 and 8 are for the Power On switch. (Power On button)

C) Pins 1 and 3 are for the HarDDrive Activity LED light.

D) Pins 5 and 7 are for the Reset switch. (Reset button. IF used)

Pin 9 is NC. Not connected

Oct 18, 2010 | E-Machines eMachines Desktop PC

2 Answers

I cleaned my pc, and disconected the wires that are right downside corner. I cant remember how to put them back rightly. Any help? hdd led power led + power led - power switch (sw) reset switch (sw)


H57H-AM2 v2 Motherboard in a Gateway DX4840 wire connections for Front Panel are shown here in Photo. I took them before I disconnected mine so it works.3_3_2012_12_10_44_pm.jpg3_3_2012_12_10_56_pm.jpg

Jun 15, 2010 | EliteGroup ECS L4VXA2 (CDL4VXA2)...

1 Answer

Where do i plug in the wires for my motherboard. My husband accidently disconnected them, and walked away.


The set of pins for the power switch etc are on the front left corner of the motherboard if you are looking at the board with the ports/vga/keyboard to the back. Hope this helps.


1 HD_LED_P Hard disk LED pull-up
2 FP PWR/SLP MSG LED pull-up
3 HD_LED_N Hard disk active LED
4 FP PWR/SLP MSG LED pull-up
5 RST_SW_N Reset Switch low reference pull-down to GND
6 PWR_SW_P Power Switch high reference pull-up
7 RST_SW_P Reset Switch high reference pull-up
8 PWR_SW_N Power Switch low reference pull-down to GND
9 RSVD_DNU Reserved. Do not use.

Jan 23, 2010 | MSI MS-6533EG-LM (MS-6533E-120)...

1 Answer

Replug front panel wires to ml8000a


Hy there, i have a picture abaut it :
http://vtinfo.uw.hu/micr-mini.jpg

96009ba.jpg

Mar 22, 2009 | VIA EPIA ML8000A Motherboard

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

1,741 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Alun Cox

Level 3 Expert

2678 Answers

David Payne
David Payne

Level 3 Expert

14162 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...