Craftsman lawn tractor will not start changed the bat nothing. Check the 30amp fuse is good, I have tried a new solenoid but not that. I turn the key and nothing. E brake is on. Blade are not inthe on postition. Any help would be great!
Herm
Check for voltage at the solenoid when the key is in the start position.
The wire from the ignition should send 12 volts to the solenoid when the key is in the start position.
If it does not, you probably have a bad ignition switch.
(usually caused by water/corrosion)
144 views
Usually answered in minutes!
Have you looked at the ignition switch?
I would recommend ignition switch or just start following the power
×