Question about Polaroid FLM-2011 Television

1 Answer

Polaroid FLM-2011 I have a Polaroid FLM-2011 LCD, It power up and you see Polaroid on the screen just for a second then it goes out and all i get is sound from the station it is on. Do you know where i can get the parts to fix this problem?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 44 Answers
Re: Polaroid FLM-2011

On Polaroid tv's ther is no individual parts available. You have to replace the control module.
Send me the model and serial number and I will give you a Quote on the cost of the module.

Lou Margo
Allied Electronics
908 276 8987 cel 513-490-0759

Posted on Nov 29, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Polaroid tv screen goes black after 30 40 minutes, sound is good. No picture. Turn set off and wait a few minutes and the picture returns for a few minutes then goes black again.

Ur tv now power on only have picture few mins,than dead,have sound only?Yes,than the 1 or 2 the long board call the LCD inverter boards are dead.The LCD inverter long boards help the LCD screen to have a backlight to produced a picture.Tries websites like, to buy 1 or 2 long LCD inverter boards for the replacement.

Jul 05, 2010 | Polaroid FLM-3232 Television

1 Answer

Missing Power supply and remote

Hi! i hope this would help, most power supply for 20 inches lcd are rated 12volts dc at least 5ampere. try replacing your power supply.

Aug 28, 2009 | Polaroid FLM-2011 Television

1 Answer

While watching the TV the picture suddenly went out - still have sound. Turning the TV off and on again does not help - the POLAROID Logo displays, but when the station connects - still no picture

possibly external power supply faulty under load it may fail these power supplies ofen have capacitor failure open the power supply to check for leaking/bulging/swollen capacitor is around 2000uf rated at 12v

Apr 28, 2009 | Polaroid FLM-2011 Television

1 Answer

Polaroid flm 2017 turns on then goes black sound still works

This problem is often replated to a leaking power supply capacitor on the secondary side of psu rated at +/- 2000uf at 12v...yup 4 bucks should do it...the hardest part is often opening the power supply up screws are often located underneath rubber feet....never make contact with the primary ac supply side even after it is unplugged reservoir capacitor high voltage can store a charge for long time and be dangerous to contact.

Dec 13, 2008 | Polaroid FLM-2011 Television

1 Answer

Polaroid FLM-2011 LCD

look at the back of your lcd it usually will state the voltage and power requirements of the required replacement adapter...never exceed the voltage requirements this may cause damage DO NOT USE THE 16V ADAPTER!
The adapter you require appears to be rated at 12V x 5A a 60Watt unit you can replace most likely with similar switch mode unit rated at 12V and at least 5A or more

Aug 25, 2008 | Polaroid FLM-2011 Television

2 Answers

TV will not turn on

Try the power supply. Fnd one with the same volt, amp and polarity and try it.

Aug 22, 2008 | Polaroid FLM-2011 Television

2 Answers

FLM-2011 will not turn on

does anyone have the answer to this problem. it seems like alot of polaroid tv's are doing this. please if anyone knows how to fix the tv and get it to turn back on and not flash red to blue anymore, please let us know.

Jun 28, 2008 | Polaroid FLM-2011 Television

1 Answer

Polaroid 20"LCD TV

You have blown caps on board should be around 1000uf at 16-35v.

Mar 17, 2008 | Polaroid FLM-2011 Television

2 Answers


My cox remote guide lists for the Polaroid TVs the following codes:
LCD TVs: 1276 and 1316
TVs: 0765, 0865, 1276, 1314, 1316, 1326, 1327, 1328, 1991, and 1992

I hope one of them works.

Sep 10, 2007 | Polaroid FLM-2011 Television

3 Answers

Polaroid LCD only shows green verticle lines?

your picture tube is not blown you are having problem in the color circuit there is an ic that controls that circuit,the tv is also having a vertical problem an ic also controls that circuit you will have to call a tech to repair your tv good luck

Apr 27, 2007 | Polaroid FLM-2011 Television

Not finding what you are looking for?
Polaroid FLM-2011 Television Logo

Related Topics:

294 people viewed this question

Ask a Question

Usually answered in minutes!

Top Polaroid Flat Panel Televisions Experts

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

The Knight
The Knight

Level 3 Expert

66352 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers

Are you a Polaroid Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides