Hi I own a Sony S2210 car cd player. I am trying to tune the radio stations manual to get to an open station so I can use it with a Tom Tom Go 720. The Tom Tom allows you to brodcast to your car stereo system. But I can't figure out how to manual tune it keeps seeking the strongest signal and that ant my Tom Tom.
You need to press and hold the seek button the it should beep (or not) then you should be able to serch through manualy,just don't hit the button to fast as it will turn the auto search back on?
hope this helps?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Sony XPLOD CDX-GT200 CD Player Radio: To receive store stations(press); store stations (press & hold). Preset tuning is not possible, however one can store the correct frequency in the memory.
Manual storing: while receiving the station that you want to store, press and hold a number button(1 to 6) until "MEM" appears. The button number appears in the display. PS: If u try to store another station on the same number, the earlier station will be replaced by the new one............................................sodeep
If you only get 1 station no matter what station you tune into, you have a ans electrical problem on the main board of the radio. Your tuning voltage is not changing as you tune thru stations. There is most likely a shorted or open transistor that supplies the tuning voltage on the main board.
There is no easy fix for this, you would need the schematic to find out why the tuning voltage is not changing.
If you know how to do electronic troubleshooting and have a multimeter and the schematic you can fix it with not to much trouble. If this is not the case, you will need to take it in to a service center.
Sorry that there is no easy fix for this problem.
You will need to use the Forward and Reverse buttons on the CD player. Set the station by holding the button you want to set it to until it blinks and shows the station number.
To set more that 10 stations. Press the (>10) button and then enter 11 or 12 or so on and set the stations the same as above.
I haven't done this on mine yet, but on most you simply tune to the desired station then HOLD IN the preset button you want to assign it to until it blinks or some such indication of setting acceptance.
Just bought the same unit but the instruction manual was double dutch. After messing around for a while I managed to do it like this. Whe the unit is set to DAB, Press the Sel+/TU+ or the Sel-/TU- button on the unit (not the remote) until the DAB station displays and then press the Select CH+ button again on the unit. Wait a few seconds while the word "tuning" is displayed and that station should now play. To save the station as a preset do this. When the station is playing use the remote and press the PRG/MEM button once. Then press the number for which preset you want that station to be. The station will be saved. EG to save Radio 1 as Preset station 1, play Radio 1, Press PRG/MEM, then press number 1. After that whenever you press number 1 on the remote Radio 1 will play. Do the same with any other station you wish to save. To save station 10 press the 0/10 button on the remote. To save station 11 press 10+ then 1, 12 is 10+ the 2 etc. Good luck Dopeyemma