Retore my aspire m5100 to factory settings - Acer Computers & Internet

Here's an online manual for you Acer Aspire M5100 Manuals

Acer Aspire M5100 Teardown

Part Number: MB.ABK02.001

You would have to purchase a compatable video card that supports dual monitors.

its time to start shoping for a new computer that model is known to stop working after 2-4 month due to a flaw in design it may have overheated

Check the temperature of the CPU in Bios. It is probably higher than the Safe temperature and it gets into shut down mode to protect itself.
Open it, detach the cooler from the CPU and clean it, detach the CPU from the socket, clean the paste from the top, put a new one, clean the socket and put everything back. It should work perfectly.
If you need further assistance, just leave a comment. Cheers

I had the same problem, the most likely factor is that your motherboard doesn't support that CPU's either FSB or L2 or whatever. Just find a CPU with the same FSB as your old one and that one will work.

All manuals and drivers for your M5100 here:

http://support.acer-euro.com/drivers/desktop/aspire_m5100.html

Best wishes.

Here is a link to your restore procedure, the restore image is on your HD: http://www.acerpanam.com/synapse/forms/portal20.cfm?recordid=1156&formid=3390&website=AcerPanAm.com&siteid=7117&words=all&keywords=&areaid=2

I Hope this helps

Dennis

change the Power supply then check