Question about Kenwood KAC-9152D Car Audio Amplifier

1 Answer

My computer sound is on but i dont hear any thing

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers
Re: My computer sound is on but i dont hear any thing

Check for latest device drivers, if you don't work, replace the soundcard.

Posted on Dec 17, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Lights on no sound jensen 300 watt 2ch amplifier

first thing you should do is check your coax cables and wiring to the subs if that dont work see if your radio has a sub control to turn on the sound to the sub.

Oct 29, 2011 | Car Amplifiers

1 Answer

Heeey. I have the Audiobahn A2300HCT and it has a very strange problem. When i start the amp its in the normal blue mode but i have no sound. The one power output (LEFT) indicator shows +3DB (full) the...

My brother just bought an A2300HCX and almost the same thing happen. 1 of the gauges (left side) was no movement. We tryed hooking the amp to the right side, and it works. The Left side turns out was shot, had to get it fixed. So sorry to tell you but sounds like one of the channels has internal damage. I know this isn't the good new you were wanting to hear, but hope it was helpful

Apr 08, 2010 | AudioBahn A2300HCT Car Audio Amplifier

1 Answer

I was given the amp and I want to test it with a volt meter to see if it even works. I currently dont have a system .

Easiest way, get any old speaker 4 or 8 ohm and hook it up to channel 1 then plug an rca lead into channel 1, power up amp and touch finger on rca and you should hear pop or scratchy sound from speaker . Audio circuit for channel 1 is good . repeat for channels 2 3 4 .

Mar 17, 2010 | Eclipse PA5422 Car Audio Amplifier

2 Answers

Subs sounded great then someone tweeked the amp and it sounds horrible. What is the proper way to start from scratch to set up the amp. LSX-2400 800 watt Logic Sound Lab.

turn all your gains, bass, and low pass filters all the way down. then turn your gains up until you hear distortion from the speakers, its called clipping. once you hear this, slowly back the gains down until you hear no more distortion, and then tune your low passes, and your bass to your preferences

Oct 11, 2009 | Logic Soundlab LSX-2400 Car Audio...

1 Answer

Subwoofers dont bump

No such thing as a typical sub system. Be more specific? If the subs are moving well and just not basing you will need to check 2 things first. Try the polatity of the speakers (reverse one) they may be out of phase and will cause the bass to cancel eachother. Another cause is the box may the incorrect size for the speakers and will not give you the correct sound the speakers are capable of. If neither of those work check your amp settings and make sure its set on sub/low frequency.

Sep 05, 2009 | Kicker KX600.1 Car Audio Amplifier

1 Answer

Radio sound work some times and some times it dont its a factory radio

Could be a number of things. Does it get better or worse when you wiggle the volume knob? Is it FORD? because they have an internal intermittent problem that I believe stems from from the auto sound level (ie: the faster you go the louder it gets) but it can go nuts and just turn up or down at will. If the sound is either on or off it could be something wrong with the internal amp of the head unit, or a bad connection to the speakers on the back of the deck. In closing a guy needs more input to give a direct answer. But the above would be things to check or consider.

Jul 28, 2009 | Car Amplifiers

1 Answer

Amp light on but no sound

either something in your amp burned up, or the audio wires going from your cd player to your amp are bad

Apr 14, 2009 | Alpine MRP-M500 Car Audio Amplifier

1 Answer

No sound flashing e-02 in window

Turn power off this will release the protection turn power back on if code is still flashing contact kenwood dealer

Jan 04, 2009 | Kenwood Excelon KAC-X621 Car Audio...

1 Answer

Ignition noise

The sounds you are hearing are usually due to one of two things:
  1. The RCA preamp cables between the head unit and amp are either run too close to the +12V line or the connectors are touching a metal object.
  2. The ground connection is too long or not as clean/solid as it should be.
To fix problem #1, just make sure the RCA lines are on one side of the vehicle and the power is on the other.

To fix problem #2, make sure your ground connection to your amp is as short as possible (ideally <2ft) and is tied to a clean (ie no dirt, paint, grease) point on the chassis.

If the issue still exists, search the web for a ground loop isolator.

Apr 04, 2008 | Jl Audio 500/5 Car Audio Amplifier

1 Answer

Lanxar VW12D no sound after excess play

I'm not understanding what you mean by the "Sub doesn't even sound blown" if it doesn't play at all. One thing you can check is if you gently push in on the cone you shouldn't hear anything, if you hear a scratching noise and can feel resistance then you have a problem. If you have an OHM meter, you can check the voice coil impedance, it is a down and dirty way of checking to see if it is good or not. Measure all of the voice coils that you have and they should all read about the same, not necessarily exactly the same but pretty close. This test should tell you a lot. If it seems to test out fine there is something wrong else where. Let me know if you need more help.
-Andrew Hawkins

Apr 03, 2008 | Xtant A3001 Car Audio Amplifier

Not finding what you are looking for?
Kenwood KAC-9152D Car Audio Amplifier Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Amplifiers Experts

Matthew Spark
Matthew Spark

Level 3 Expert

1042 Answers

Tygh Duval
Tygh Duval

Level 2 Expert

290 Answers

Pieter Vleeshouwers

Level 3 Expert

1315 Answers

Are you a Kenwood Car Amplifier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides