Question about SanDisk 1GB Cruzer Titanium USB Flash Drive (413072) Hard Drive

1 Answer

Untitled When I insert the 1GB Cruzer into the USB port the computer screen shows not only the volume image (which I can open with no problem) but also an "Untitled CD" image. Unless I trash the CD image immediately it stays on my desktop after I "eject" the Cruzer. Then  the image refuses to go into the trash. This happens every time I insert the Cruzer into my USB port. Help!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 36 Answers
Re: Untitled

I'm guessing you are using a Mac, so you will need a friend's computer with Windows XP or later. Go here for the U3 Launchpad Removal Tool, or Google 'sandisk u3 removal'. The CD image is a hidden partition used by the U3 LaunchPad.

Posted on Dec 04, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How to install a USB flash drive

Just plug your USB flash drive into the USB port of your computer or other USB-equipped device and drag the files you want to take with you into the folder that appears on your screen. Your files are instantly transferred to your USB flash drive. To transfer the items on your USB flash drive onto another computer, simply plug your USB flash drive into the computer that you want the files transferred to, open the folder that appears on your screen, and drag the desired files onto the computer's desktop.

1.) Insert Flash Drive into the USB Port of your computer.

-Where is my USB port? It is usually found in newer model computers in a hidden compartment on the front of the hard drive and in the back of the hard drive on older computers. The port for laptops is found on the side or back of the computer.

2.) Wait for the hardware to automatically install on your computer.

After the hardware is installed, it is ready to use!

3.) In most cases, an Options Window will automatically open. Select "Open folder to view files" Click "OK."

Jul 19, 2011 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

1 Answer

When I plug in my SanDisk U3 Cruzer Micro USB Device it tells me to plug it in. It lights up but I cannot open.

click start control panel administrive tools computer management device manager scroll down universal serial bus controllers you should see a yellow question mark?
right click to reinstall drivers
if you can see your usb drive but its not working
ports(com&lpt)right click update driver
hope this helps

Apr 09, 2011 | SanDisk 1GB Cruzer Titanium USB Flash...

1 Answer

My 1gb cruzer usb device is not responding on my laptop but is on my parent computer what would i do

If it does not work on your laptop, what error-messages do you get?
Does some other USB device work in the USB port on the laptop?
Do you have more than one USB port on your laptop?
Do any USB devices work in any USB ports on your laptop?

Dec 18, 2010 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

1 Answer

My flash drive is inserted in a USB port. It says

Try to format the mp3 player.
Go through: Setting>Control Panel>Administrative Tools>Computer Management>Disk management>
Try to format it with fat files system.
hope this help you

Jan 13, 2010 | SanDisk 1GB Cruzer Titanium USB Flash...

2 Answers

My SanDisk Cruzer Micro 2.0 MB does not show up on my computer as a volume which I can fill. It shows up as a removable drive and wants me to insert a disk. When I took it back to Radio shack it seemed to...

Just to make sure, try connecting it into another computer (but not in Radio Shack), if the device gets detected by another computer, then you need to try enabling the USB Legacy Support of your computer.

But if the other computer does not detect it, then you need to take it back to Radio Shack and verify with them if there's any additional driver or firmware upgrade that would help you to detect the SanDisk.

Have a good day!

Oct 22, 2009 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

1 Answer

When i plug my sandisk 2gb it dosent work!

Have you tried every USB port? Do any other things work on your USB ports? Is it USB 2.0 and your computer only does USB 1.0? Have you tried the sandisk in another computer? Does the USB port feel loose when the sandisk is inserted? Sounds like the sandisk may be bad.

Sep 10, 2009 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

1 Answer

I cannot insert the cruzer miscro USB Flash Drive into othe computer

Can you explain how exactly you are trying to insert it? Some of these drive have a cap that cover the actual USB port. Others, you have to slide the port out with a slider..

Oct 29, 2008 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

1 Answer

SAN DISK PEN DRIVE troubleshooting

When i connect the pendrive into the USB drive the indicator light doesnt glow on pendrive and no "new hardware found" message appears on the screen.

Mar 18, 2008 | SanDisk Open Box 1GB Cruzer Mini...

3 Answers

Usb cruzer micro and other usb storage devices malfunction and not recognized by the computer.They all work well with other computers - I've tried already to update every driver and firmware but with no...

Could you give me information on the computer your using? I'd need the mother board manufacturer, the bios manufacturer, the bios revision number, The operating system your using, The revision number of your operating system, And is it only usb storage media that your having trouble with, or does your issues include usb imaging devices?

Nov 30, 2007 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

2 Answers

Cruzer Scandisk 2.0 titanium

Hi, Not unless you are using Windows98, your PC should automatically recognize the SanDisk Cruzer Titanium as a "Removable Storage/Device". Driver is not required for Windows ME, W2k or XP. If for some reason the SanDisk Cruzer Titanium (non-U3 devices) is not recognizable, then perhaps it is not a problem with the PC but with the SanDisk. Pls try all other USB ports of your PC (front and back). The SanDisk website provides utilities/software for this kind of eventuality. They are Sansa Firmware Updater and Sansa Connect Recovery Tool. Both are available at Pls be forwarned that some utilities can and will reset your SanDisk to default and any or all data can and may be deleted. Hope this be of some help/idea. Pls post back how things are or should you need additional information. Good luck and kind regards.

Sep 30, 2007 | SanDisk 1GB Cruzer Titanium USB Flash...

Not finding what you are looking for?
SanDisk 1GB Cruzer Titanium USB Flash Drive (413072) Hard Drive Logo

Related Topics:

230 people viewed this question

Ask a Question

Usually answered in minutes!

Top SanDisk Hard Drives Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers


Level 3 Expert

281 Answers


Level 3 Expert

2598 Answers

Are you a SanDisk Hard Drive Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides