Question about Jabra BT350 Bluetooth Headset Headset

2 Answers

Won't go into pairing mode no matter how long I hold the answer/end button. Yes, I start with the device powered down, hold the a/e button, blue light flashes every few seconds but never goes solid. Any ideas?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 1 Answer
Re: Won't go into pairing mode no matter how long I hold...

You need to turn it on so you get the intermittent flashing blue light then hold down the + button and answer button at the same time until you get a solid blue light. Then get your device to search for the headset etc......

Posted on Nov 30, 2007

Re: Won't go into pairing mode no matter how long I hold...

This worked great with "0000" passkey! thanks!

Posted on Dec 16, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How do you reset the device?

first you must put the blue tooth device in pairing mode,most blue tooth device manufactures use the power button for this ,by holding the power button down for 6 to 10 seconds when turning the device on it usually puts it into discovery mode,a solid light might stay on ,then you have to enter a pairing or pin code.Now most manufactures of blue tooth devices use a 4 digit factory pin pairing code they are asw follows 0000,.1234,9999,or 1111 i hope this helps

Feb 26, 2011 | Plantronics Explorer 220 Bluetooth Headset...

1 Answer

Unable to put phone into pair mode motorola hs810 to a i phone 3g

Most blue tooth device manufactures use the power button to set your device to discovery mode,first you must turn the power to on for your blue tooth from your phone menu,then most manufactures use the power button to put the blue toooth device into discovery mode,by holding the power button down when you turn your device on holding it for 6 to 10 seconds,usually a solid light appears on your blue tooth device,it is now in discovery mode,on your phone menu there should be an add new or search devices,once you've clicked that it should discover your blue tooth device,then you will need a pin or pairing code,Most manufactures use a factory 4 digit pin pairing code the y are as follows 0000,1234,1111,or 9999, if you have done the steps correctly the menu will say connect,press conect and you should be connected..i hope this helps

Feb 22, 2011 | Motorola Mobility HS810 Consumer Headset

1 Answer

How to reset a bluetooth i.oval 303

Most manufactures have a factory 4 digit pin that once you have put it to discovery mode,usually blue tooth manufactures use the power button to reset the discovery mode,by holding the power button down while turning it on keep holding the power button for 6 to 10 seconds a light should appear on your device,thus the device is in discovery mode,once your blue tooth device has been put into discovery mode you should go into your phone menu and turn the blue tooth power on,then it should have an add new or seach for device,click that and it should pair with the phone,you will need a 4 digit pin pairing code,Most blue tooth manufatures use factory pairing pins they are as follows 0000,1234,1111,or 9999 try them in that order,i hope this helps you

Feb 22, 2011 | Itech i.Tech i.Oval 303 Bluetooth Headset

2 Answers

I cant pair my jabra bluetooth to my evo!

First, put the headset into pairing mode. To do this, remove it from the Stone charger and press and hold the answer/end button until the lights flash four times slowly - this indicates that the unit is off. Then, press and hold the answer/end button again - you'll soon start to see lights flash - hold the button until the green light is on steady and the blue light is flashing. This is pairing mode. Now your Evo should be able to "find" the Stone to pair with it from within the Bluetooth menu on the phone.

Jan 20, 2011 | Jabra Stone Bluetooth Headset

2 Answers

My Soyo Free Styler 600 bluetooth headset did not come with instructions, how do you get it to work with the blackberry curve?

on the soyo freestyle 600 you have to power on the device (hold power for about 5 sec) then hold either the volume up or volume down button, I forget, for another 5 sec it should go into pairing mode (Blue-->Red flashing) youre blackberry should b in search mode for bluetooth devices at this point. Then youre blackberry will recognize the device and ask for a passkey (0000 default) registration will be complete at this point once the blackberry recognizes the headset..

Jun 13, 2009 | Soyo FreeStyler 600 Wireless Headset

2 Answers

Headset does not flash red/blue so I can pair it with my phone

To get it into pairing mode (flashing red and blue) turn the headset off.  Hold the main button down until the light goes red and then off.  Then push and hold that same button and keep holding it even after the blue light comes on.  It will now go into pairing mode, flashing red and blue.  Set your cell phone to find it and it should work.

May 09, 2009 | Plantronics Discovery 925 Bluetooth...

1 Answer

My bluetooth headset won't go into pairing mode, I keep holding down the answer button from the off mode but no matter how long I hold it in the blue light won't flash at all. I heard that if you hold down...

try sending it back where you got it and exchanging it. just ran into that with an h.s. 820. got it exchanged and now evey thing is jake. also try holding the call button down for 10 seconds if no go i feel your tooth has a lil problem. good luck.

Jan 22, 2009 | Jabra BT350 Bluetooth Headset Headset

4 Answers

Plantronics 520 will not pair

"Begin with the headset turned off. Press and hold down the silver call control button in for 6-10 seconds. The light will flash blue first. Continue to hold the button down then release the button when the indicator light starts flashing red then blue."

Dec 04, 2008 | Plantronics - Bluetooth Headset Plus Base...

3 Answers

Trying to pair BT150 but it won't go into pairing mode

I had the same problem. The many instructions available don't have quite the right details. This worked for me:

1. Turn off the BT150 by holding down the answer button about 5 sec. until the blue light goes off and is not flashing.
2. Turn on the BT150 by holding down the answer button about 5 sec. until the blue light flashes.
3. Keep holding the answer button, and press and hold the volume + button for another 5 sec. until the blue light comes on solid.

Nov 12, 2008 | Jabra BT150 Wireless Headset

6 Answers

Setting up pairing

# Fully charge your Jabra BT150 and switch on by pressing the answer/end button # Press the answer/end button and the volume up (+) button together, to put the Jabra BT150 in pairing mode # Set your mobile phone to ?discover a Bluetooth device? (see your phone user guide) # Press Yes or OK when asked if you want to pair the phone with the Jabra BT150 # Enter passkey or PIN = 0000 (4 zeros), then press Yes or OK # Your phone will confi rm when pairing is complete

Jan 05, 2007 | Jabra BT150 Wireless Headset

Not finding what you are looking for?
Jabra BT350 Bluetooth Headset Headset Logo

1,181 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jabra Headsets Experts


Level 3 Expert

328 Answers

Jazz Boyce
Jazz Boyce

Level 1 Expert

728 Answers

Richard Schabler

Level 2 Expert

108 Answers

Are you a Jabra Headset Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides