Question about LG VX6100 Cellular Phone

2 Answers

What happened? My new cell phone has gone bonkers!This morning I tried to enter a new contact tha started with the number 6 and I got the error message that this feature is not supported at this time. Then I tried the other numbers in just regular dialing mode and the number 9 now connects me to the Brew, whatever that is! I then tried my menu button and when I try to switch between the icons or in the list mode between the different lines, it will only go one selection over or down and opens up that selection only. When I use the directional buttons around the ok only the left button works and then for the next selection only. When I press the down the number three appears on the screen. The right button connects me to Brew. The up button toggles the speaker button. When I try to call 737# to get help it says the number cannot be connected. I just used that number last week to reload a 25 dollar card. I really liked the phone until now.. Please help. I have searched the manual I downloaded and now I am asking for help online. We just had a rainstorm and I keep it in the car. Could this be a moisture problem?

Posted by on

2 Answers

Re: What happened?

My cell phone has a funny looking icon with an envelope and a small letter i in front of it on my screen. I have checked my text messages and there are no notes pending. Can someone help get this off my screen?

Posted on Jan 16, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.


    An expert that has over 500 points.

  • Expert
  • 316 Answers
Re: What happened?

If the phone has gotten wet during the storm most definately.
and from the discription you have give I would guess it got wet

Posted on Nov 28, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How do I get to messages gone to drafts on my LG Cell?

LG Help Product Support and Troubleshooting LG USA


Jul 08, 2015 | LG New L38C Optimus Dynamic CDMA Wireless...


How To Enter Unlock Code Into Motorola Mobile Phones Step By Step Instruction...

Model: All Motorola; check below for exception
1. Insert an unauthorized Sim Card and turn ON your phone
2. "Enter Subsidy Code" box appear
3. Enter Unlock Code

WARNING: If one of these messages appears:
- "Contact Service Provider"
- "Tamper Alter"
- "Wait before enter special Code"
- "Contact Service"
It's because you or somebody already enter too many wrong codes, you just have to let the phone ON at these errors message (do not close the phone if V3) and after 40 minutes to 12 hours, the message " Enter Subsidy Code" will appear again.

Model: A1000 and other A series model
1. Click on the Phone icon
2. Enter **057*
3. "Locking Enter Personalization" box appear
4. Enter Unlock Code
5. Press Ok

Model: L6i & L7i (NOT L6 and L7)
1. Press and hold * key and enter 787090
2. "Menu Network" box will appear
3. Select Yes
4. Press OK
5. Will ask for code
6. Enter Unlock Code

Model: All Motorola 3G network model
1. Enter **057*
2. Enter Unlock Code

Motorola CDMA & TDMA
1. Enter 74663# [Menu] [Menu] and you will be asked for a Subsidy Code
2. Enter Unlock Code
Unlock Motorola CLIQ (SIM Unlock) 1. Reboot your Motorola CLIQ with an unaccepted SIM card in.
*If the display reads "Enter Special Code", enter the unlock code and press "OK"
*If the display does not read "Enter Special code":
2. Press and hold the * key until an entry box is displayed.
3. Type *, #, 3, 2, # and press "OK"
4. Enter your Motorola CLIQ's unlock code and press "OK."
5. Your Motorola CLIQ should now display either "Completed" or "Deleted"

Motorola MPX
1. Insert an unauthorized Sim Card and turn ON your phone
2. If the phone is asking for NETWORK PIN
3. Enter the NETWORK PIN
4. If the phone is asking for SERVICE PROVIDER PIN
6. Your phone is now unlocked

Network PUK
If the phone is asking for NETWORK PUK: Power on the phone with the original Sim Card in and wait till phone is fully powered on and you have access to menu. Enter *#**364# and press green button. You will get an error message and thereafter, you will see an Engineering Menu:
1. Select Options
2. Select GSM Test
3. Select Send AT command
4. Now you will see a new window Saying "Send AT Command"
6. Press send
If you get Response "0 []" phone is unlocked. If you get 1 error, then make sure you have typed the code correct and try the other code. Turn your phone off, take battery out. Put battery back in. Power on the phone and leave it for 40 minutes to 12 hours until the message "Enter NETWORK PUK" is gone. Now enter the Unlock Code and 00000000 (eight zero's) as a new password

Service Provider PUK
If the phone is asking for SERVICE PROVIDER PUK: Power on the phone with the original Sim Card in and wait till phone is fully powered on and you have access to menu. Enter *#**364# and press green button. You will get an error message and thereafter, you will see a Engineering Menu: 1. Select Options
2. Select GSM Test
3. Select Send AT command
4. Now you will see a new window Saying "Send AT Command"
6. Press send
If you get Response "0 []" phone is unlocked. If you get 1 error, then make sure you have typed the code correct and try the other code. If you do not have the original Sim Card or if the original Sim Card is not accepted because you flashed the phone with other firmware, then we cannot help you

You can get the unlock code through online..........give your IMEI number and get the unlock code for ur mobile.... i will suggest the website which is doing good service can approach this website.

on Apr 07, 2011 | Cell Phones

2 Answers

Code to unblock puk codes

to my knowledge, this cannot happen without someone actually locking the sim, so you may want to contact your employer, but just in case your employer doesn't know whats happening,
here are instructions to find your puk code for att, if you have a different carrier, contact their customer support for further instruction

Obtain a PUK Code

Instructions: When the error message "ENTER PUK CODE" is shown on the screen of the device:
  1. Log into myAT&T.
  2. Select Wireless from the myAT&T tab at the top of the page.
  3. Select Phone/Device.
  4. Click Unblock SIM Card.
  5. A new page will open, containing the PUK code for your phone. Enter the code on your phone's screen to unblock the SIM and create a new PIN.
Unblock SIM Card
  1. Enter the eight-digit PUK code on the phone, then press OK/Yes.
    Note: Some Motorola phone users need to enter **05* if "enter PUK" is not already displayed. After entering **05*, enter the eight-digit PUK code and press OK.
  2. Select a new PIN code, then press OK/Yes.
  3. Re-enter the PIN code, then press OK/Yes.
  4. If the codes were entered successfully, the phone is ready for use.
If the incorrect PUK code is entered 10 times in a row, the SIM card becomes permanently locked and a new SIM card must be purchased. If the device is requesting PUK2, call Customer Care at 800-331-0500.

... good luck

Jan 05, 2014 | Samsung Cell Phones

1 Answer

I need puk code for my cell phone nokia 2690 contact number.7702092777

At the time when you enter a wrong pin number three times the phone asks you for a PUK number. The PUK code is generally eight digit number. This PUK number is an unlocking code which helps you to unlock the phone and use it. If you enter a wrong PUK number 10 times than you simcard gets rejected. Then you will have to buy a new simcard. It might happen that your phone might ask you for PUK2 after you enter your PUK number. You can find the PUK code is in your SIM card documentation Starter Pack. If you do not have this then contact your phone service provider. Your cell phone service provider can give you the PUK code once they have confirmed your identity to prevent any stolen SIM access.

Mar 23, 2011 | Nokia 2690 Cell Phone

2 Answers

I entered the pin number three times it was wrong after that i cant use the simcard and when i open the mobile it ask for the PUK number .

You need to contact your cell phone service provider and they will give you the PUK code for your SIM card when you provide your account details and they have verified your identity.

Nov 23, 2010 | Cell Phones

1 Answer

When I try to save a contact on my palm pixi it just says "error." I can't save new contacts, I can only add to existing. How do I fix this?

You can add a contact that synchronizes one of your online accounts, such as Google or Exchange. You can also add a

contact in the Palm Profile account, which does not synchronize with an online account but is backed up daily to your Palm Profile.

If you are using Contacts for the first time, you go through a few different steps to get or access the contacts on your phone (see Using Contacts for the first time ). Follow this procedure to add contacts directly on your phone after the first time you use Contacts.

1. Open Contacts .

2. Tap .

3. (Optional) Tap the account button to the right of Name to change the account to which the new contact will be added.

4. Tap fields to enter contact details, select a ringtone for that contact, add notes, or add birthday details for the contact. Scroll to see all of the fields available for contact info.

5. In some fields, such as New Phone Number, when you enter the information a label button appears on the right. Tap the button to change the label for your entry-for example, to identify a number as a mobile or work phone.

Tip Use the Reminder field to enter that important message or question you have for this contact. The next time you send or receive a call or a message to or from the contact on your phone, the reminder pops up on the screen. You can also add a reminder later (see Assigning a reminder message to a contact).

Tip To insert a two-second pause in the dialing sequence, enter a T where you want the pause to appear. To insert a stop in the dialing sequence, enter a P where you want the stop to appear; to dial the next set of numbers after the stop, tap the screen.

6. Tap Done.

Oct 24, 2010 | Palm Pixi Cell Phone

1 Answer

Msgs from 'unregisterd contacts' when names ar registerd already

This often will happen for interstates or overseas contact, when you enter your contact number without Country and/or Area code and the received number is 'different' like completely specified (or the other way around):
1). On your contact, Smith number is 0123 456789 but you receive +61 3 123 456789 (this is the most likely scenario for you as you can reply properly)
2) your contact, Smith number is +61 3 123 456789 but you receive 0123 456789 (as an example, they are calling using VOIP and can specify the number they transmit)
Solution is to look at you phone log and enter the number EXACTLY as received even as an additional number.
Hope it helps let me know how you go!

Jan 24, 2010 | Nokia N97 Cell Phone

1 Answer

How can I enter a soft (2 sec.) pause in a contact number on A766

1) From the Home screen, go to Start > Contacts

2) Select the desired phone number

3) Press the Menu soft key and select Edit.

4) Use the Left or Right navigation key to place the cursor at the place where the pause needs to be added.

5) Press the Menu soft key and select Insert Pause to add a two-second pause. The letter ‘p‘ will appear where the pause has been set.

6) Use the keypad to enter any additional numbers if desired.

Tip: You can create pauses longer than two seconds by entering multiple pauses.

Aug 01, 2009 | Samsung Propel A767 Cell Phone

1 Answer

5300 gone mad

Just get a new one for free through manufacturer defect because the hardware is just bonkers =P Hopefully that helps =) take care =D

Jan 14, 2008 | Nokia 5300 Grey Cellular Phone

Not finding what you are looking for?
LG VX6100 Cellular Phone Logo

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Cell Phones Experts

Scott Fryer

Level 2 Expert

80 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1128 Answers

Jeremy Murray
Jeremy Murray

Level 2 Expert

127 Answers

Are you a LG Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides