Question about Whirlpool MH7135XE Microwave Oven

1 Answer

After changing a blown oven light, the clock works but nothing else turns on, including the fan, light, microwave

I have a Whirlpool microwave hood combination, model YMH1141XM. After changing a blown cooktop light, the clock works but nothing else turns on, including the fan, light, microwave. When I changed the light it popped and I smelled a burnt smell. We have replaced the bulb, and also the 20A fuse inside the curcuit board, but it still won't turn on anything other than the clock. Any ideas?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Whirlpool Master
  • 9,098 Answers

This light failure often occurs when a bulb goes out and the filament shorts, or when the bulbs are removed or installed without first unplugging the oven from the power line. Either can cause such a failure on the controller.

This can often also affect the exhaust fan operation, too. The lights and fan can be inoperable or stuck on too.

Details of our service and critical safety information and disassembly information is at our site, linked here on Fixya:
http://tinyurl.com/yzjozk

Posted on Nov 28, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is bulb so hot on cooktop light on Kenmore Elite Microwave Hood combination


depending on the type of bulb ( sounds like a halogen? ) turn it off for cleaning

Jun 26, 2014 | Kenmore Microwave Ovens

1 Answer

Kenmore microwave hood combination, The fan wont


With the full model number, chances are we could have helped you more.
If the cooktop lights recently failed, it may need circuit board repair.

Or it may be a failed hood TCO.

You can find links to helpful exploded view diagrams and part ordering help here.

I recommend that you bookmark that link to your favorites.

Oct 15, 2013 | Microwave Ovens

1 Answer

Kenmore microwave hood combination


With the full model number, chances are we could have helped you more.If the cooktop lights recently failed, it may need circuit board repair.
Or it may be a failed hood TCO.
You can find links to helpful exploded view diagrams and part ordering help here.

I recommend that you bookmark that link to your favorites.

Oct 15, 2013 | Microwave Ovens

1 Answer

Have a whirlpool microwave model GH5184XPS-4. This morning I turned the "Cooktop Light" on and a few minutes later I heard a small pop, looked over and the lights had gone out. One of the bulbs...


yup most probably that is the case.

you can locate the fuse usually it is placed near the main power supply or just trace the supply cord going in your unit. but before you open your unit be sure it is unplug to avoid electric shock.

slowly disassemble the unit and be sure that you can replace all the screws back to it original positions. after locating the fuse, check if it has a continuity and be sure to replace the same fuse rating. also investigate why the fuse had blown up and look for abnormalities.

if nothing found then replace the fuse and put all back then test the unit. if still it blows fuse, their must be something wrong with the unit and have it service to qualified personnel.

Dec 31, 2010 | Whirlpool Microwave Ovens

1 Answer

The range-top light blew and now replacement bulbs


My Whirlpool/Roper microwave/hood combo has the same problem. I replaced the bulb twice, checked the bulb and it works, but not in the microwave. I wrote to Whirlpool asking about the problem. Haven't heard from them yet.

Apr 02, 2010 | Whirlpool MH1150XMQ Microwave Oven

1 Answer

We changed the cooktop bulb and now nothing works. When you push the light button the light inside the microwave turns on. If you set the cook time the time counts down but nothing runs.


Check the door interlock switches. They will keep the unit from starting but you will have power everywhere else. If this is helpful, Please leave positive feedback. Thanks, SnugglePants

Oct 20, 2009 | Whirlpool Microwave Ovens

2 Answers

I need User Manual for my microwave


Just click below;

Whirlpool Microwave/Hood Combination manuals, user manuals, owners ...
Whirlpool Microwave Hood Combination MH7140XF, YMH7140XF User Guide Get This Manual .... Please help find the manual for this Black & Decker Convection Oven ...
Hope this may help you; DON'T FORGET TO RATE:

Sep 06, 2008 | Whirlpool MH7140XF Microwave Oven

Not finding what you are looking for?
Whirlpool MH7135XE Microwave Oven Logo

472 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9098 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Chuck

Level 2 Expert

228 Answers

Are you a Whirlpool Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...