I dont have a quality picture on my camera

Sir Myself Raj, My Sony Tv Projection Model is kp -es53me1. We are using this tv since 8 years. Now recently we are facing a problem with it. The problem is, The Picture quality is not good. Total screen & pictures are appearing as blur. Would you please give the solution for this?

To remove the blur from photos, you need to be in a place where there is enough light to have a fast shutter speed. Using the camera indoors without the flash on will usually result in blurry photos.
Try using the flash.

Holding the camera with two hands or even better, on a tripod, will help too.
Happy shooting!

If parts of the person's face are in focus, and others are not, it is because your depth-of-field is too shallow. This is controlled by the aperture of the lens.
Use the "A" mode on your camera, for aperture priority, and set the aperture to f/5.6 or f/8. This will make the person's face completely sharp. You will, however, lose some of the blur in the background.
Also, be careful not to move the camera after focusing.
Happy shooting!

Turn of the high quality mode to low quality mode... pictures will be clearer.

You may be using too slow a shutter speed, resulting in either camera shake or subject movement. See what the manual has to say on this.

CCD FAILURE !

actually when it starts it starts like this pics with red or purple shades , noise ,distorted, blurred pics , discolored then it goes completely black

dont worry just call Sony for free repairs it is a manufac fault in thousands of cameras with different brands just call sony about ur problem PLS RATE ME FIXYA for help

Sony has issued service advisories for these problems

http://esupport.sony.com/US/perl/news-item.pl?mdl=DSCT1&news_id=161

see this

http://www.imaging-resource.com/badccds.html

im having a similar problem but it wont recognize my videos...but for ur problem if u have a pc that takes memory cards directly it is prob the best way to upload ur pics but if anyone can fig out how i can upload vids thru the camera plug i would be so happy

If the photo shoot out show white , the obscure (quality variation), and even horizontal line ( white lines), and so on over-exposure cases, even if the use of anti-tremor, set to default values are invalid, because the camera shutter fault.

Can't repair by yourself.
It's need repair camera machine shutter.

more detail CASIO Exilim EX-Z700 overexposure

blurred picture? try adjusting manually on the camera until you get the desired picture.

This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your cameras warranty status. Please check the following two links for more info:
http://camerarepair.blogspot.com/2007/11/canon-digital-cameras-showing-black.html
http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=225&modelid=13390&keycode=2112&id=29819
Applicable cameras include:
A40, A60, A70, A75, A80, A85, A95, A300, A310, S1 IS, S60, S200, S230, S330, S400, S410, S500, SD100, SD110