Cannot install eoston c88+

change the printer settings to print in black and white

ftp://ftp.epson.com/drivers/epson13488.exe that is the link to your software. rate this soluting

if you do not have the Driver CD for your epson C88 all in one inkjet printer, download from here

Click here to Download

Run setup.exe from your CD or where your download file save and follow the instruction when installer ask you to connect your printer then connect your printer.

This will help. Thanks please keep updated. please do rate the solution positively .Thank you for using Fixya

Regards
manish

Found the drivers on the Epson Web Site. Just click on link below for manual and drivers and support.
If you find this information helpful, pls rate me.

http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid=58602&prodoid=58654751&infoType=Downloads&platform=Windows

Good Luck................

All the information you need to for your printer is available here:

Epson Stylus C88+

The short version for installing on your printer is to download the proper driver for your operating system from the "Drivers & Downloads" section (see link above).

Run the installer and only plug the printer cable into the computer when the installer tells you to...

After that it's just a case of accepting any warnings re: Signed drivers and following the instructions on the screen.

Hope that helps.

You will need to download the driver from the Epson support website for you model and version of windows that you are using. Install printer through windows Start- control panel- printers and facts- install printer.(after you have it physically installed and attached. 
Your link for the drivers and literature below:
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid=69123&infoType=Overview

Hi,
Try www.cnet.com it's where I get all my Patches/drivers & downloads most for free!
Press the Blue button please to appraise my FREE! Effort.
Thank You!
Paul 'W' U.K.

Here is a link to get the drivers/software you need: http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=58602
Hope this helps & please remember to rate my answer. Thanks.

yes you have to go to control panel and remove the drivers and install the drivrs again ok

yes, and for free. visit epson's website then clcik support and download. locate your product and download the updated driver.