Question about Dynex DX-UC104 (DXUC104) Serial Adapter

2 Answers

Can not load driver onto Vista operating system.

I am trying to install the DX-UC104 on to Vista and cannot get the driver to load. I have tried the CD-ROM that came with it as well and downloading the driver off the Dynex web page. However, I can not get the setup.exe to run.

Posted by on

  • 6 more comments 
  • Anonymous Dec 02, 2007

    Vista will not allow me to install the driver can you help in detail?



    trimble@zoominternet.net

  • Anonymous Dec 22, 2007

    Cd-Roms will not load on to laptop(windows vista) Tried opening computer no D drive appeared..

  • Anonymous Feb 12, 2008

    i cannot add belkin installer program to windows vista

  • Anonymous Feb 26, 2008

    The box said it is compatible to Window XP, but the CD that came with does not have xp driver. Using Me driver does not work either. I tried to find the right driver from the web and cannot find any thing different from the CD that came with it.

    This is a frustrating thing.

  • Anonymous May 07, 2008

    setup.exe will not load from cd or from download

  • Anonymous May 10, 2008

    can not load driver onto vista operating system.


















  • Anonymous Jun 24, 2008

    same thing..cannot load driver on the windows vista home edition..my browser is firefox so i dont want microsoft pack one or two near it..pack one and two will just take over your pc..you can only do what microsoft will allow..its my pc..not theirs..and im sure the got with vivitar and got in bed with them so that their driver will not load unless you are microsoft invaded..darryl bremerton wash..i throw this damn 20 camera away if it has to be that way..and vivitar can have microsoft programming..all my other cams load just fine

  • jimkelly552 Sep 13, 2008

    Same thing. Downloaded driver from Dynex also but got same message "This package does not contain the driver for this OS" Any solutions out there?

×

Ad

2 Answers

Yes

Posted on May 10, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 54 Answers

I downloaded the driver and examine it
you must add driver manually

Posted on Nov 27, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I got a new dell laptop and installed windows home edition and when i went to use it the wifi/wireless drivers were not installed how do i get them to be installed for a dell latitude d610 laptop?


Re-install the Operating System that was "factory-installed" onto the computer (Vista? 7?), and the correct device-drivers will be loaded.

You probably have "abandoned" other "ancient" Microsoft products (Windows 95, Windows 98, Windows ME, Windows 2000), and now it's time for you to get used to Microsoft's newest Operating Systems, namely Vista and/or 7.

May 07, 2010 | Televison & Video

1 Answer

Is there a way to run a Dynex DX-UC104 with vista.


Sounds like you need to make sure your chipset drivers are up to date and all service packs are installed.
Ther is no reason it will not work in vista as it works in windows 7 64bit.So visit your motherboard site to get bios updates and driver updates, then update all through windows update and try to reinstall.
Windows should install a driver for vista.

this is a link for non vista
http://www.dynexproducts.com/t-drivers.aspx

Jun 14, 2009 | Dynex DX-UC104 (DXUC104) Serial Adapter

1 Answer

Can't install vista


You need to find the drivers for the controller card.

Put the drivers onto a floppy drive. When the software asks for the drivers, use those drivers to let the OS know where to look for the hard drives.

I'm not sure if vista can load drivers off of a USB thumb drive. I havn't actually tried it yet.

Check Maxtor for the drivers you need.

Mar 01, 2009 | Microsoft Windows Vista Home Premium with...

1 Answer

Sir, Iam using toshiba Satellite L45-S7423 model laptop.already this laptop contain windows vista. i want to instal Windows XP.can you please help me how can i install Windows XP and how can i download...


I RUN BOTH XP AND VISTA ON THE SAME SYSTEM YOU ARE BEST TO PARTITION THE DRIVE AND PUT THEM IN SEPERATE SECTIONS, I USE XP FOR KIDS OLDER LEARNING PROGRAMS WITH 256 RESOLUTION AND UPTODATE PC ON VISTA SIDE. AFTER FDISK FORMATING DRIVE I FIRST INSTALLED XP IN PARTITION THEN UPGRADED WITH FRESH INSTALL OF VISTA TO SEPERATE DRIVE , WHEN BOOTS ASKS YOU WHICH START UP SYSTEM YOU NEED N U LOAD DRIVERS IN NORMAL WAY AND GET DRIVERS OFF INTERNET , U CAN USE VISTA SETUP TO GET DRIVERS PUT ON DONGLE THEN RELOAD ON XP AND LOAD DRIVERS.


YOU WILL HAVE TO ADD A PARTITION TO YOUR DRIVE IF GOT SPACE AND DONT WANT TO START FRESH.
THEN SEE IF XP CAN BE LOADED ONTO IT ILL TRY IT ON MY SYSTEM TO C IF LET U GO BACKWARDS RATHER THAN UPDATING

ACTIONMAN

Feb 27, 2009 | Microsoft Windows XP Professional With...

2 Answers

Problem with Dynex DX-UC104 Serial Adapter


I bought a USB 2.0 4 Ports Dynex Serial Adapter to install in my Vista 64 bit operating system computer and when I try to install the driver is not supported for my system, what can i do.

Oct 31, 2008 | Dynex DX-UC104 (DXUC104) Serial Adapter

1 Answer

NEED DRIVER FOR USB PORT TO 9 PIN PLUG


here is the website for driver download.
since you did say what Dynex card is, you have to do it.
http://www.dynexproducts.com/t-drivers.aspx

Jul 20, 2008 | Dynex DX-UC104 (DXUC104) Serial Adapter

1 Answer

Problems loading Vista


What edition of Vista do you have? Without full version you can't put vista on first. You will need to have an old windows virsion like 98, 2000, .xp
Vista has about 7 differt Editios exp Home version complet, or upgrade,
Prof upgrade, or profel
if you have bought upgrade profl. You will need to have an old op of xp prof.

Jan 06, 2008 | Dynex DX-UC104 (DXUC104) Serial Adapter

Not finding what you are looking for?
Dynex DX-UC104 (DXUC104) Serial Adapter Logo

Related Topics:

1,974 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dynex Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2268 Answers

micky dee

Level 3 Expert

3015 Answers

Mike

Level 3 Expert

4356 Answers

Are you a Dynex Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...