Question about Braun AB314SL quartz travel alarm clock.

1 Answer

Braun AB314SL Quartz Alarm Clock

I have a new Braun AB314SL alarm clock that's loses 44+ minutes every 24 hours. How can I fix it? Or, where can I send to get repaired?

Jerry Valliere

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 4,102 Answers
Re: Braun AB314SL Quartz Alarm Clock

Their is no way of setting it up yourself the only thing you can do is take it to a watch repair shop you can often find these in markets and the ones in the markets are alot cheaper as i dont know the area where you live i couldnt advise you on a certain place but usuall somwhere that does key cutting thse often repair watches.
this is the only problem with digital watches and alarm clocks it is difficult to do and impossible to do yourself so take it to a watch repair shop they should set it right for you for next to nothing sorry i couldnt offer you any more help but unless their is an adjuster where the battery goes their is no way of doing it yourself.
If you have only recently brought it do you still have reciept because these shouldnt be sold not set up so if you have reciept take it back and they will replace it if not and repair is only option take it into a watch repair shop this is the only sollution but shouldnt cost to much hope this is some help to you let ne know how you get on good luck

Posted on Nov 27, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How to change the time?

time button and hour button at the same time

Mar 13, 2016 | Braun AB314SL quartz travel alarm clock.

1 Answer

How to set alarm for Westclox 47550 Quartz?

Hi, A 8 year old can do this. On the back of the clock there should be 2 round turning nobs. 1 is for to set time (min...) 2sec is for to set timer for that hour...usually is a smaller hand on face of clock.
select hour to wake up at and set alarm Button. This is only basic set up.

Jan 13, 2014 | Westclox 47550 Quartz Loud Bell Analog...

1 Answer

Where to buy a braun alarm type 4768/AB30sl

This product can be bought from Ebay, no matter where you are now. You can buy it from them by E-payment, and they will send it to you at your doorstep.
Two Ebay site address are given here. You can get their sites by search too. is their web address. Just serach and find the nearest store from Italy. Singapore store is the best I know. OK.

Nov 19, 2011 | Braun AB314SL quartz travel alarm clock.

1 Answer

I just got a Memorex Digital CD Alarm Clock with no manul the modle number is MC 7101. I'm not able to set the clock or alarm. I just need the instructions.

To set the clock:
1. With the power off, press the TIME button; the time will blink.

2. Press the MINUTE button to set the present minute and the HOUR button to set the present hour.
Make sure to set the correct AM/PM setting.

3 Press the TIME button (or wait approx. 15 seconds) and the time will be set.

To set or reset alarm time:
1. With the power off, press the desired ALARM, Press and hold the desired ALARM 1 or ALARM 2 button; the alarm time will blink. The Alarm 1 or Alarm 2 time and settings will appear.
Press the MINUTE button to set the alarm.

2. Press and hold the desired ALARM 1 or ALARM 2button; the alarm time will blink.
Press the MINUTE button to set the alarm minute and the HOUR button to set the alarm hour. Make sure
to set AM/PM setting. Press the ALARM 1 or ALARM 2button again (or wait approx. 15 seconds).

3. Repeatedly press the ALARM 1 or ALARM 2 button to select alarm off, alarm on, for buzzer, radio or CD.

If you needed the manual it could be downloaded:


Aug 01, 2011 | Memorex MC7101 Clock Radio

1 Answer

Can not get the clock or alarm off the 24 hour clock!!! very annoying!!

  1. Try pressing the "MODE" button until the time setting flashes.
  2. Now press the "2" button (right under the screen) and simply advance the clock past 24:00 and the clock will enter 12 hour mode again.

  • Now the time and alarm will be in regular 12 hour time as well automatically.
  • If for some reason it is not then just reset the alarm by
  1. Pressing "MODE" until the alarm time and icon flashes on the screen.
  2. Press "1" to decrease and "2" to increase hours.
  3. Press "3" to decrease and "4" to increase
  4. Press "5" to select the alarm volume.
  5. Press ALM "OFF/ON" to activate/deactivate the alarm.

  • Hope this helps and thank you for using FixYa.

Regards, Tony

Jul 25, 2011 | Sharper Image SI785 Clock Radio

1 Answer

How to use voice control feature of Braun 4760 alarm clock

Turn the alarm on, then when the alarm rings, just make a noise, say a word, grumble or clap hands and it will stop ringing for 8 minutes, then start again. If you need to yell louder to make it stop, that's an indication that the battery is going dead.

Mar 11, 2009 | Braun AB314SL quartz travel alarm clock.

2 Answers

Sharper Image S1785 Clock Settings

When setting-up the time (by pushing the "mode" button), the alarm time set comes up first, followed by the time set.
When setting the proper hour in this mode, simply continue through the military "24 hour" cycle and the second cycle of 24 hours will be in the 12 hour format.
Continue through and finish the mode set-up function and your up and running. --

Dec 12, 2008 | Sharper Image SI785 Clock Radio

1 Answer

My digital alarm clock is fast

I'm not on this field of expertise but I could try giving you some tips. These cloks work by dividing the natural oscilations of a quartz cristal in the corresponding way to form "1 second". A quartz cristal like the one in your clock will oscilate at about 14080236 times per second. Your clock uses a specialised chip in order to count these oscilations and know they form "1 second". However, the problem is the following. These clocks doesn't compensate for frequency variation over the mains power line. You should always look firts at it's power ratings and determine if it requires 50Hz or 60Hz. Even if you use an adaptor to raise/lower the tension from 110 to 220 v or viceversa, this woun't correct the problem as the adaptor will leave the frequency unchanged. Unfortunately in order to make the required adjustments you woun't need a resistor or capacitor, but a whole bunch of them in order to make a frequency divider-convertor that's stable enough to give your clock a fixed time reference. One more thing, not all components have exactly the parameters noted on them. There's another thing called Tolerance. A 1Kilo Ohm resistor with 10% tolerance (most comon tolerance) can have any value with +/- 10% of it's noted parameters, and in this example, could have any value between 900 ohm - 1100 ohm. These clocks will need components with a very strict tolerance in order to have an acurate time reference. Note that they aren't atomic clocks, they simply use a larger chip that includes most of the clock, time reference, frequency analyser and divider. An atomic clock doesn't use quartz cristals, instead it relies on the natural oscilations of the very precise Cesium izotope atom. The rest of the atomic clock is made up in a similar way as usual clocks (more fixed and small tolerance of course :) ).

Jun 16, 2007 | Chaney Instrument 66702 Mercury Black...

Not finding what you are looking for?
Clock Radios Logo

Related Topics:

714 people viewed this question

Ask a Question

Usually answered in minutes!

Top Braun Clock Radios Experts

The Knight
The Knight

Level 3 Expert

66413 Answers


Level 3 Expert

5924 Answers

ray gallant

Level 3 Expert

34581 Answers

Are you a Braun Clock Radio Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides