Hi good morning,I bought UTSTARCOM ADSL 2+ Modem/Router WA3002G4 for the BSNL broadband connection. But it is a wireless modem with 4 RJ45 type ports. At the same time i am using it to connect to my desktop pc. It has LAN card also(inbuilt) on motherboard. But when i connected it to my pc modem is not detecting. Why this problem is appearing, please give me the reply immediately and as soon as possible. Email ID: pvamsi_pavan1986@yahoo.co.inMobile: 9885689495
usually windows doesnt detect external modems except when they are connected through usb port which is plug and play. i guess after connecting the modem with lan port of pc try configuring the settings in windows and modem for internet connection to work. if the led of lan on modem is stable it means the modem is connected to pc well.
I was asked to test a NVF200R modem at our Maui resort condo. Although advertised as plug-and-play,...
(More)
I was asked to test a NVF200R modem at our Maui resort condo. Although advertised as plug-and-play, it was obvious from the beginning that it was not. It quit feeding an internet signal every time the phone was plugged in. Tech Support suggested some fixes in the phone room. I hooked up again, feeding the internet signal into my Belkin router. The entire Oceanic broadband cable system crashed! And I am being blamed! Seems that ALL extension phones must be plugged into your modem using splitters, no other telephone plugs in the condo can be used, and DHCP has to be disabled on my router. Sorry for venting, but I ask you, How can you advertise your modem as plug-and-play. Could you live with these restrictions in a two bedroom condo? I think you need to go back to the engineering department and develop a foolproof system! I am done with the test!