Question about Sewing Machines

2 Answers

Spare Part for sewing machine

I am looking for a snap-in feed cover for my Singer 3013 sewing machine. It is 22 years old. The part is a clear feed cover.

Posted by on

  • WendyPrice Dec 01, 2007

    I searched the website you suggested but they do not cover my model of machine. Thanks for trying.

    I contacted Ron Anderson at ron@a1sewing who said if he didn't know the answer to a solution then the solution did not exist. He told me that the part I require no longer exists but gave me a solution how to get around the problem which I found very useful and will probably stop me having to replace my machine.



2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 76 Answers
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Wendy, I have the part you are looking for. If you want it just let me know. Maybe you could help me, I am looking for the manual for the same machine. Thanks, Sally

Posted on Apr 14, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a4830c singer machine can you tell me if feed dogs can go down if so how

You can't lower the feed dogs on the Singer 4830C. Instead, you need to cover the feed dogs. This cover plate is part of the standard accessories sold with the machine.

Most Singer sewing machine manuals are available here: . The direct link to the manual for the 4830 (the C indicates where the machine was made) is . The image of the feed dog cover is on page 7 (part F, described in item 9 of the list). The installation of the cover is shown on page 10.

You can buy a replacement feed dog cover plate here: . A number of 4830C accessories and parts are available here: . Amazon also has the part here: .

I hope this helps.

Cindy Wells

Nov 09, 2017 | Singer Sewing Machines

1 Answer

Singer sewing machine model 7005, dog feed is not working. Where is the lever to adjust the dog feed.

The Singer Imperial 7005 does not have a feed dog lever. Instead there is a feed dog cover that gets placed over the needle plate. To remove the cover, raise the needle and presser foot. Open the slide plate, then lift up the front edge (closest to the bobbin) of the cover. Then pull the feed dog cover away from the sewing machine.

See page 10 of the manual; it's page 12 of the PDF. The manual is available at the Singer manual search page: . The direct link to the manual is .

I hope this helps.

Cindy Wells

Sep 13, 2017 | Singer Sewing Machines

1 Answer

How do I raise and lower the feed dogs on a singer 8606 sewing machine, there is no visible controls to do so Regards Charlie

Your machine doesn't appear to have this capability. There is an accessory that snaps in place to cover the feed dogs. A lot of sewing machines have this option because it involves less mechanical design and expense.

See pg 36, item #20:

Aug 13, 2017 | Singer Sewing Machines

1 Answer

I have a Singer touch and sew sewing machine I took the top off and can't get it back on. how do I get it back on

Make sure that all the points on the machine match and fit to their corresponding places on the cover, and then the cover will snap right into place.

Oct 13, 2014 | Singer Touch Sew 7462 Mechanical Sewing...

1 Answer

Lower feed dogs

had a quick look at the manual for this at and I'd say your machine doesn't have the function to lower the feed dogs, many don't. It shows a darning plate which goes over the feed dogs to sew on buttons so if you are wanting to do free motion embroidery or similar, then use this plate to cover up the feed dogs.

Oct 10, 2013 | Singer 1507

1 Answer

I am looking for two blind hemming feet for overlocker model: XGlobe Lock M34. The part numbers are: 59151 and 59155. Either these parts or parts that would fit this machine .

I thought I'd see what i could find on this.. The first problem I ran into is your sewing machine model "M34" I can't find it. You have it listed as a Singer - is that correct?

I learned that the are basically 5 types of Singer presser feet mounting options. They are:

New Style Snap-on, Old Style Snap-on Low, Old Style Snap-on Slant, Low Shank & Slant Shank

The shanks look like this:


Armed with this - have a look at the eBay stores. One fairly comprehensive looking store is "Gone Sewing" I hope this helps.

Apr 15, 2011 | Singer Sewing Machines

1 Answer

I let my feed dog down to stipple, and not it won't come back up. I have a singer 7470 and the feed dog switch in on the back of the machine. you push and slide it to one side to allow the feed dog to go...

I think that there is something disconnected, maybe a belt or a switch has broken. Try taking your machine cover off and check it out. I hope that it is something just disconnected, making the switch not respond. Good luck, I have my fingers crossed for you. I am a 50 year sewing veteran and have seen all sorts of strange things. I anwer for free.

Mar 30, 2011 | SINGER 7470 Sewing Machine

2 Answers

Reverse stitching on a singer 514, HELP!

In the center of the stitch length knob (at the right side of the machine) is a button. You would push that button in to get the machine to reverse.

May 08, 2009 | Singer 7442 Mechanical Sewing Machine

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

173 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1133 Answers

Cindy Wells

Level 3 Expert

5579 Answers


Level 3 Expert

82285 Answers

Are you a Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides