Question about PDAs

Open Question

Motorola f3 display

Just got my f 3 Works fine but I have no battery led's lit (2 lit when charging) and charged for 24hrs.Also it seem that the signal led's work backword too.There very seldom lit yet the phone works fine,,,,thank u

Posted by on

6 Suggested Answers

  • 43 Answers

SOURCE: nokia 6630 wont charge or turn on

HI THIS IS DUE TO YOUR MOBIL DOES NOT GET THE POWER FORM THE BATTERY = pla check is the battery is connected properly == in order to check if there is problem in battery you can unplug the battery and connect any other battery == if the phone is on then the problem is in the battery other wise i m afraid the problem is in the phone GOOD LUCK

Posted on Apr 28, 2007

  • 40 Answers

SOURCE: My phone won't charge

if u have a multimeter do check the output of the power supply for the voltage if it is ok then check the battery and check the supply is coming to the battery point to charge it if not the charging ic is defective do check that

Posted on Jul 03, 2007

  • 1 Answer

SOURCE: how to unlock a motorola f3 for free

I have bought a motorola F3 in Germany
imei 355072010363570 and the network T-Mobile(D)
can somebody help me to unlock this mobile phone

Posted on May 16, 2008

  • 1 Answer

SOURCE: My blackjack wont charge

I did a hard reset because i was having the same problem with a new battery and a new charger. I took my sim card out first to prevent any possible data loss. then followed the following steps:

  1. Once the handset has rebooted to the Today Screen, enter the following code: *2767*3855#. The handset should display a message “Formatting- Please wait a moment”.
  2. The phone will reboot after the Full Reset as this is normal operation.
after i did that i plugged in the charger and it worked perfectly. this is the last step that you would do after updating the software on the BJ

Posted on Jul 11, 2008

  • 7 Answers

SOURCE: Palm Z22 will not turn on

Well you can try a trickle charging on the device.Trickle charging is connecting the device to the computer using the USB cable and then let the device get charged using the computer power source, make sure that you charge the device for 6-8 hrs on the computer.

Posted on Oct 30, 2008

  • 86 Answers

SOURCE: Battery won't charge in phone.

Have you tried a different charger? If not I would suggest stopping by one of your cellular providers stores and having them plug it in to see if it works.

Posted on Mar 27, 2009

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


1 Points

Related Questions:

2 Answers

My motorola Q charger is not charging my battery.

It is your PDA battary problem you are suggested to buy new one as by getting charged it cells get weak by the passage of time.

Oct 15, 2009 | Motorola Mobility Moto Q

4 Answers

Motorola A1200 cell phone battery will not charge with AC chargers


If your phone is still under warranty the best solution is to get it replaced.The problem is actually with the port of the charger.I mean the hole in which you plug in your charger isn't working properly.Where as your USB port is different and works properly so it charges the battery.So you will have to get this repaired.

Sep 18, 2008 | Motorola Mobility A1200

1 Answer

Battery charge indicator seems faulty.

Solved own problem. Bad conection between pcb and battery contact pins. Reheat each battery pin on the pcb carefully until solder reflow occurs then remove heat. PDA now repaired

Aug 03, 2008 | Fujitsu Pocket Loox 410 Pocket PC

1 Answer

Motorola Q9

It's sound to me like you guys might have dead cell... change the battery and it should be fine.
Battery Maintainance
1: Try and charge battery when it's totally off/flat
2: Only charge battery till battery full indication comes up.
3: When disconnecting battery switch phone off first.
4: When phone is not in use don't leave it in the sun facing the battery.

.....Hope this helps.
Don Cass

May 12, 2008 | Motorola Mobility Q9m Smartphone

1 Answer

Discharges very fast

it may be ur battery problem may b u replace ur battery or minimal use of display settings.,n regarding the reconizing of memory may work wit some reboot method..stil check out ur battery first.....try it..if it works do rate me

Apr 06, 2008 | Motorola Mobility A1200

1 Answer

Palm Charging

Synchronize your E2, then work on draining the battery all the way down in order to reduce the effect of battery memory. Memory happens when we repeatedly partially charge a battery. Over time the battery will forget how to keep a full charge, but will remember how to be partially charged. That's usually when users realize there's a problem. The first step is to drain the battery and FULLY charge it at least fully on the battery's indicator, but if you can, let it sit for 24hrs. The second step is to try to use the battery more before charging it and let it charge fully (ie-overnight) before using it when you need to charge it.

Good luck and let me know how you make out.

Jan 09, 2008 | Palm Tungsten E2 Handheld

3 Answers

How to unlock a motorola f3 for free

Hi there

I spent a while trying to find the right tools. You'll need a usb to f3 cable (actually a usb-serial cable) and download the tools from this site.

Dec 01, 2007 | Samsung Blackjack SGH-I607 Smartphone

1 Answer

Motorola A2100 Display Problem

I've had the same problem before, but it has been strictly for the short-term. It seems as though Motorola has some type of fail-safe feature that automatically cuts off the display if there are any problems or drops. Mine has done it maybe 4 or 5 times in 7-8 months. However, each time I just turn off the phone, take out the battery and wait a few minutes and it's fine. It may depend on just how hard the drop was though.  

Oct 05, 2007 | Motorola Mobility MING A1200

3 Answers

Battery Charge - First Use

My experience was similar to yours. The LED turned green after about only 2 hours. Because I didn't want to stay up until midnight to start playing with my Axim, I took it out of the cradle after the 2 hours and everything was fine. Besides, having downloaded and read the user's guide 2 days before receving my Axim, I knew that a green LED meant it was ready to go. 3 days later, everything is still fine and seems normal. A year ago, I received a Palm with similar initial charging requirements, and it also didn't take as long as the directions said it would.

Sep 13, 2005 | Dell Axim X5 Pocket PC

1 Answer

E-100 AC adaptor faulty??

It may be your main battery is dead. I had the same problems and had to replace the main battery and everything worked fine!

Sep 05, 2005 | Casio Cassiopeia E-100 Pocket PC

Not finding what you are looking for?
PDAs Logo

Related Topics:

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top PDAs Experts


Level 3 Expert

7983 Answers


Level 3 Expert

94039 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a PDA Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides