Fujitronic ice maker

I have found that 90% of canister Ice cream makers are modeled the same, I have had a Back to Basics, Rival and West Bend Ice cream makers and the lids are interchangeable.

A lot of companies don't make replacement parts so I usually go with the West Bend lid. The first thing you will want to do if find the brand on your Ice Cream maker (usually found on the motor/top) and see if the manufacture does make replacement parts for your machine. If they do not have parts available I would try the West Bend Ice Cream maker lid U66-2, like i said it is a pretty standard size and will fit most Ice Cream Canisters.

Here is a link to West Bends part page: IC10885 Ice Cream Maker

The lid is very inexpensive so even if it doesn't fit your not throwing away a lot of money.

-Colleen @ Mending Shed

I have found that 90% of canister Ice cream makers are modeled the same, I have had a Back to Basics, Rival and West Bend Ice cream makers and the lids are interchangeable.

A lot of companies don't make replacement parts so I usually go with the West Bend lid. The first thing you will want to do if find the brand on your Ice Cream maker (usually found on the motor/top) and see if the manufacture does make replacement parts for your machine. If they do not have parts available I would try the West Bend Ice Cream maker lid U66-2, like i said it is a pretty standard size and will fit most Ice Cream Canisters.

Here is a link to West Bends part page: IC10885 Ice Cream Maker

The lid is very inexpensive so even if it doesn't fit your not throwing away a lot of money.

-Colleen @ Mending Shed

Alan, there unfortunately are not any canister ice cream makers that the manufacture sells the replacement gear wheel.

Unfortunately when you have gear issues or motor issues there are not any replacement parts and they have just become a throw away item.

here is a link to a full pdf file of the manual ,gaurantee card,recipes for the delta gt-em-02 ice cream maker that is sold by aldi
http://www.gt-support.de/download.php?l=2

if this link doesn't work try typing globaltronics into google these are the manufactures of this machine

DID YOU USE SALT IN THE ICE ??

Unfortunatel for what it will cost to repair you can buy another on ebay for way less, i know thats not what you wanted to hear but its the simple economics of our high priced repair world. Happy hunting S/B around 40.00 plus shipping

High room temperatures will throw this unit off BIG TIME. Just to give you an idea how sensitive the freezer bowl is - if you run cold water along the freezer bowl before putting your ingredients in, the COLD water is enough to unfreeze the bowl! Don't remove the freezer bowl from freezer until you are immediately ready to begin mixing - not 5 minutes earlier.

-Tha Mp3 Doctor

have you checked on the fuse and the thermostat of the appliance, because aside from the cooling system, you may want to check on the easy parts first.

i will go further on this, will keep you updated if in case i find more.

it could be the cooler deparment needs to be replaced

try ebay or go to the products website and see if they sell that part.