Question about Altec Lansing VS2121 Computer Speakers

2 Answers

No sound from my speakers

Please help me

Posted by on

  • 3 more comments 
  • Anonymous Feb 21, 2008

    hi there has some one got the drivers for altec lansing vs2121 as reformatted bros comp and speakers not working as drivers r missing thnks

  • Anonymous Apr 05, 2008

    I don't find the Altec Lansing VS-2121 listed as a chose for my sound devices and I suspect if I could reload the driver then the speakers would work.

  • clitcomander Oct 13, 2008

    no sound factory dell soundcard intagrated vs2121 amplified speakers and sub

  • Anonymous Nov 08, 2008

    i dont hear sound from spekears

  • Anonymous Nov 15, 2008

    when i plug head fones in or just leave it full around sound i donrt hear anything but small staic

×

Ad

2 Answers

Do the speakers have power if yes try and plug into a ipod do you then get sound ???

Posted on Nov 29, 2007

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Prodigy:

    An expert who has answered 500 questions.

  • Expert
  • 620 Answers

Good day Cinmar


PLease be more specific of your problem,
your Brand, Model, type of sound card.

Posted on Nov 28, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No sound from Creative Labs Speakers- Please help


to localised your problem, try to plug your speakers to other sound source like mp3 player ,stereo system. if still no sound coming from it,your problem is within the speaker system. perhaps the audio power amplifier ic inside, need to be replaced.

Oct 12, 2008 | Logitech X-530 Computer Speakers

1 Answer

Sound problem


@manojkadam_1 : do you have the same K9VGM-V motherboard too? if so then please read this , maybe can help
Let's we analyze the problem. The problem can be
1. The speaker (please change the speaker) if the other can do provide the sound then the problem comes from your speaker.
2. Since this specification of motherboard provide 8.1 channel audio, and when you use the desktop speaker (only 2.1 desktop speaker) or (only 2 desktop speaker with no booster) you must adjust the setting of the environment through the control panel...
If both of you still doesn't know how to do this, email me at profsoh_bk@yahoo.com , i would be glad to help you both...

Aug 13, 2008 | MSI K9VGM-V Motherboard

1 Answer

No sound


Is the speaker with no sound, actually connected to anything? (if it's connected to the first speaker, it's possible that the speaker is simply dead and needs replaced)

May 26, 2008 | Inland ProSound 1000 Computer Speakers

1 Answer

Sound


Hi,

the problem would not be the speakers it maybe your audio card. you will need to get the driver for your system model's audio card.


please rate me. thank you.

May 24, 2008 | Audio Players & Recorders

1 Answer

No sound from speakers at all


To troubleshoot a speaker system where sound is not issuing from all speakers, please do the following:
  1. Verify that all cables are plugged in correctly. Make sure the rear and/or center/sub audio cable is plugged in to the correct port. On most surround sound cards, the rear audio port is black, the front audio port is green, and the center/sub audio port is orange. If you do not have a surround sound card, make sure you obtain the proper adapter (discussed in the next paragraph) or use surround sound emulation if your speaker system offers it. If you are not sure if you have a surround sound card, please check with the manufacturer of your sound card for details.
  2. Make sure your sound card supports the same amount of channels as your speaker system contains. For 4.1 systems, it should have a front and rear speaker jack on the card. For 5.1 systems, the card should have a front, rear, and center/sub, output. The card should be properly installed and configured. Please contact your sound card manufacturer for details. If you do not have a surround sound capable sound card, you can use the source selector switch or the M3D button on the controller unit (if available). You can also use an adapter to split the signal for the front and rear speakers. This type of adapter is a 3.5mm male to 2-3.5mm female jacks. You can purchase this adapter at your local electronic store. Please refer to your manual if you do not know if your speaker system can emulate surround sound.
  3. Try connecting the speakers to a portable sound device such as a walkman or portable CD player. Plug the speakers into the headphone jack, but make sure the volume is lowered so the speakers are not over powered. You can do this for both the front, rear, center/sub speakers to verify that they work. If the speaker system works on the walkman, then you are experiencing a configuration issue with your sound card. Please contact your sound card manufacturer.
  4. Check the system Volume Control located in the System tray. Make sure that the volumes are at a reasonable level and are not checked for Muting.
Try these articles as well:

Manual

Setting up the Z5500 with PC, Mac, Xbox, Playstation, DVD Player, etc.

Hope that helps! Should you have any further questions, please feel free to post them here.

P.S. - If you find that the solution/answer I provided led you to, or resulted in a fix, please close the ticket with a FixYa! rating. I would be very grateful for your show of appreciation.

Thank you for using FIXYA!

Cheers!
IrishDruid

May 24, 2008 | Logitech Z-5500 Computer Speakers

1 Answer

Sound from 4 speakers cut off..


To troubleshoot a speaker system where sound is not issuing from all speakers, please do the following:
  1. Verify that all cables are plugged in correctly. Make sure the rear and/or center/sub audio cable is plugged in to the correct port. On most surround sound cards, the rear audio port is black, the front audio port is green, and the center/sub audio port is orange. If you do not have a surround sound card, make sure you obtain the proper adapter (discussed in the next paragraph) or use surround sound emulation if your speaker system offers it. If you are not sure if you have a surround sound card, please check with the manufacturer of your sound card for details.
  2. Make sure your sound card supports the same amount of channels as your speaker system contains. For 4.1 systems, it should have a front and rear speaker jack on the card. For 5.1 systems, the card should have a front, rear, and center/sub, output. The card should be properly installed and configured. Please contact your sound card manufacturer for details. If you do not have a surround sound capable sound card, you can use the source selector switch or the M3D button on the controller unit (if available). You can also use an adapter to split the signal for the front and rear speakers. This type of adapter is a 3.5mm male to 2-3.5mm female jacks. You can purchase this adapter at your local electronic store. Please refer to your manual if you do not know if your speaker system can emulate surround sound.
  3. Try connecting the speakers to a portable sound device such as a walkman or portable CD player. Plug the speakers into the headphone jack, but make sure the volume is lowered so the speakers are not over powered. You can do this for both the front, rear, center/sub speakers to verify that they work. If the speaker system works on the walkman, then you are experiencing a configuration issue with your sound card. Please contact your sound card manufacturer.
  4. Check the system Volume Control located in the System tray. Make sure that the volumes are at a reasonable level and are not checked for Muting.
Try these articles as well:

Manual

Setting up the Z5500 with PC, Mac, Xbox, Playstation, DVD Player, etc.

Hope that helps! Should you have any further questions, please feel free to post them here.

P.S. - If you find that the solution/answer I provided led you to, or resulted in a fix, please close the ticket with a FixYa! rating. I would be very grateful for your show of appreciation.

Thank you for using FIXYA!

Cheers!
IrishDruid

May 20, 2008 | Logitech Z-5500 Computer Speakers

1 Answer

The speakers don't work anymore...


TheLastStraw,

Pardon the pun, but it "sounds" like you need a new sound card. I recommend TigerDirect for quality parts, service, and shipping.

Please let me know if this helps. Good luck!

Feb 29, 2008 | HP P5302M Computer Speakers

3 Answers

Speaker problem


Hi MickyMac,

I have noticed this is an old request. Have you had this problem fixed?

Dec 28, 2007 | Computers & Internet

1 Answer

Sound from one speaker only.


your output stage had a problem in electronic output device and must be maintained in service center.

Nov 03, 2007 | Audio Players & Recorders

2 Answers

Speakers not working correctly


pls swap the spk pin in to your sound card jack socket . bye

Sep 22, 2007 | Logitech X-530 Computer Speakers

Not finding what you are looking for?
Altec Lansing VS2121 Computer Speakers Logo

Related Topics:

292 people viewed this question

Ask a Question

Usually answered in minutes!

Top Altec Lansing Audio Players & Recorders Experts

Carlos L. Burgos
Carlos L. Burgos

Level 2 Expert

620 Answers

The Knight
The Knight

Level 3 Expert

75843 Answers

Sharps s

Level 1 Expert

41 Answers

Are you an Altec Lansing Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...