Question about Philips MMS 203 Computer Speakers

1 Answer

No sound from my speakers

Please help me

Posted by on

  • 9 more comments 
  • Anonymous Dec 24, 2007

    I need to find the driver on the internet to download. Where can I find this?

  • D-_A_-S
    D-_A_-S Dec 30, 2007

    can't get sound out of my labtec pulse 285 computer speakers

  • Anonymous Apr 20, 2008

    no sound

  • suthunlady2 Sep 26, 2008

    My speakers worked fine until yesterday. Now there is no sound coming out of them. I have tried making sure the connections are correct and they are and have not came loose. They show they are on, just NO sound! What can I do?

  • Gene longnecker Oct 11, 2008

    i have had these speakers for 5 years and no problems, they were working fine yesterday to nothing, i plugged other speakers into same port they work fine so its not a card or driver issue. can you help me?

  • Anonymous Oct 18, 2008

    i can't hear anything from the speakers.

  • Anonymous Nov 23, 2008

    i can't hear anything from the speakers.


  • stalar Nov 29, 2008

    one of my speakers has no sound coming from it



  • Anonymous Jan 02, 2009

    My brother had this computer. and the speakers worked fine. but he kept the old speakers and i got new ones. and yet the sound wont work or anything and i have tried everything that i know to do. PLEASE HELP!!

  • Anonymous Feb 17, 2009

    no sound my computer speaker

  • matinpiker May 11, 2010

    I have a COMPAQ P4 computer with Philips Multimedia sound system but the sound system is not working, What can I do to make it workable?

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 310 Answers

Have a look under Device Manager if you can see the sound card installed fine . ( Control Panel - system - hardware - device manager ) . Look under sound, video and game controllers .. They shud not have a " ! " , "?" or a ' X ' next to them.

If they do , you would have to reinstall their drivers. Hope this helps

- Ranjit
ranjit@supportminds.com

Posted on Nov 27, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No sound from Creative Labs Speakers- Please help


to localised your problem, try to plug your speakers to other sound source like mp3 player ,stereo system. if still no sound coming from it,your problem is within the speaker system. perhaps the audio power amplifier ic inside, need to be replaced.

Oct 12, 2008 | Logitech X-530 Computer Speakers

1 Answer

Sound problem


@manojkadam_1 : do you have the same K9VGM-V motherboard too? if so then please read this , maybe can help
Let's we analyze the problem. The problem can be
1. The speaker (please change the speaker) if the other can do provide the sound then the problem comes from your speaker.
2. Since this specification of motherboard provide 8.1 channel audio, and when you use the desktop speaker (only 2.1 desktop speaker) or (only 2 desktop speaker with no booster) you must adjust the setting of the environment through the control panel...
If both of you still doesn't know how to do this, email me at profsoh_bk@yahoo.com , i would be glad to help you both...

Aug 13, 2008 | MSI K9VGM-V Motherboard

1 Answer

No sound


Is the speaker with no sound, actually connected to anything? (if it's connected to the first speaker, it's possible that the speaker is simply dead and needs replaced)

May 26, 2008 | Inland ProSound 1000 Computer Speakers

1 Answer

Sound


Hi,

the problem would not be the speakers it maybe your audio card. you will need to get the driver for your system model's audio card.


please rate me. thank you.

May 24, 2008 | Audio Players & Recorders

1 Answer

No sound from speakers at all


To troubleshoot a speaker system where sound is not issuing from all speakers, please do the following:
  1. Verify that all cables are plugged in correctly. Make sure the rear and/or center/sub audio cable is plugged in to the correct port. On most surround sound cards, the rear audio port is black, the front audio port is green, and the center/sub audio port is orange. If you do not have a surround sound card, make sure you obtain the proper adapter (discussed in the next paragraph) or use surround sound emulation if your speaker system offers it. If you are not sure if you have a surround sound card, please check with the manufacturer of your sound card for details.
  2. Make sure your sound card supports the same amount of channels as your speaker system contains. For 4.1 systems, it should have a front and rear speaker jack on the card. For 5.1 systems, the card should have a front, rear, and center/sub, output. The card should be properly installed and configured. Please contact your sound card manufacturer for details. If you do not have a surround sound capable sound card, you can use the source selector switch or the M3D button on the controller unit (if available). You can also use an adapter to split the signal for the front and rear speakers. This type of adapter is a 3.5mm male to 2-3.5mm female jacks. You can purchase this adapter at your local electronic store. Please refer to your manual if you do not know if your speaker system can emulate surround sound.
  3. Try connecting the speakers to a portable sound device such as a walkman or portable CD player. Plug the speakers into the headphone jack, but make sure the volume is lowered so the speakers are not over powered. You can do this for both the front, rear, center/sub speakers to verify that they work. If the speaker system works on the walkman, then you are experiencing a configuration issue with your sound card. Please contact your sound card manufacturer.
  4. Check the system Volume Control located in the System tray. Make sure that the volumes are at a reasonable level and are not checked for Muting.
Try these articles as well:

Manual

Setting up the Z5500 with PC, Mac, Xbox, Playstation, DVD Player, etc.

Hope that helps! Should you have any further questions, please feel free to post them here.

P.S. - If you find that the solution/answer I provided led you to, or resulted in a fix, please close the ticket with a FixYa! rating. I would be very grateful for your show of appreciation.

Thank you for using FIXYA!

Cheers!
IrishDruid

May 24, 2008 | Logitech Z-5500 Computer Speakers

1 Answer

Sound from 4 speakers cut off..


To troubleshoot a speaker system where sound is not issuing from all speakers, please do the following:
  1. Verify that all cables are plugged in correctly. Make sure the rear and/or center/sub audio cable is plugged in to the correct port. On most surround sound cards, the rear audio port is black, the front audio port is green, and the center/sub audio port is orange. If you do not have a surround sound card, make sure you obtain the proper adapter (discussed in the next paragraph) or use surround sound emulation if your speaker system offers it. If you are not sure if you have a surround sound card, please check with the manufacturer of your sound card for details.
  2. Make sure your sound card supports the same amount of channels as your speaker system contains. For 4.1 systems, it should have a front and rear speaker jack on the card. For 5.1 systems, the card should have a front, rear, and center/sub, output. The card should be properly installed and configured. Please contact your sound card manufacturer for details. If you do not have a surround sound capable sound card, you can use the source selector switch or the M3D button on the controller unit (if available). You can also use an adapter to split the signal for the front and rear speakers. This type of adapter is a 3.5mm male to 2-3.5mm female jacks. You can purchase this adapter at your local electronic store. Please refer to your manual if you do not know if your speaker system can emulate surround sound.
  3. Try connecting the speakers to a portable sound device such as a walkman or portable CD player. Plug the speakers into the headphone jack, but make sure the volume is lowered so the speakers are not over powered. You can do this for both the front, rear, center/sub speakers to verify that they work. If the speaker system works on the walkman, then you are experiencing a configuration issue with your sound card. Please contact your sound card manufacturer.
  4. Check the system Volume Control located in the System tray. Make sure that the volumes are at a reasonable level and are not checked for Muting.
Try these articles as well:

Manual

Setting up the Z5500 with PC, Mac, Xbox, Playstation, DVD Player, etc.

Hope that helps! Should you have any further questions, please feel free to post them here.

P.S. - If you find that the solution/answer I provided led you to, or resulted in a fix, please close the ticket with a FixYa! rating. I would be very grateful for your show of appreciation.

Thank you for using FIXYA!

Cheers!
IrishDruid

May 20, 2008 | Logitech Z-5500 Computer Speakers

3 Answers

Speaker problem


Hi MickyMac,

I have noticed this is an old request. Have you had this problem fixed?

Dec 28, 2007 | Computers & Internet

2 Answers

No sound from my speakers


Good day Cinmar


PLease be more specific of your problem,
your Brand, Model, type of sound card.

Nov 27, 2007 | Altec Lansing VS2121 Computer Speakers

1 Answer

Sound from one speaker only.


your output stage had a problem in electronic output device and must be maintained in service center.

Nov 03, 2007 | Audio Players & Recorders

2 Answers

Speakers not working correctly


pls swap the spk pin in to your sound card jack socket . bye

Sep 22, 2007 | Logitech X-530 Computer Speakers

Not finding what you are looking for?
Philips MMS 203 Computer Speakers Logo

Related Topics:

221 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Audio Players & Recorders Experts

Gyula Lacz

Level 3 Expert

486 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

 Grubhead
Grubhead

Level 3 Expert

5547 Answers

Are you a Philips Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...