Question about Mitsubishi VS-45605 50" Rear Projection Television

2 Answers

Mitsubishi VS-45605 convergance

My Red Convergance will not come up. Also red and blue shadows bend vertically towards the edges.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Before you change the convergence amps, pull the board out and use a magnifying glass on the pins, look for solder cracks, or just resolder all the pins. Mitsubishi is great for cold solder connections in their TV's.

Posted on Feb 18, 2015

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 70 Answers

You will need to replace both convergence i.c.s as a pair

Posted on Jul 09, 2008

  • john clyde Jul 10, 2008

    replace both convergence i.c.s as a pair and also check the fusible resistors around the i.c.s

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I had a convergence problem on my Mitsubishi WS-65711 where the red and blue was bending outward from center giving a 3D effect. I replaced the STK pack and the red and blue look good now, but now the...


green is base line center and some times is not adjustable
.Did you replace both convergance chips?
also there are 6 , 2.2 ohm res that get out of
tolarance. check them first

Jun 30, 2009 | Mitsubishi WS-65511 65" Rear Projection...

1 Answer

Red and blue shadows on my sony wega


hello it sound like convergance chips might be the trouble

shaun

Mar 23, 2009 | Sony FD Trinitron WEGA KV-32FS120 32" TV

2 Answers

Blue and red overlap shadowing


convergence ic's are your culprit. they are responsible for aligning the 3 colors your tv projects onto your screen..

Mar 15, 2009 | Mitsubishi WS-65807 65" Rear Projection...

1 Answer

Red and Blue convergence


you may need a new convergence board only a tv shop can tell you for sure

Nov 03, 2008 | Televison & Video

1 Answer

Mitsubishi rear projection tv


replace vertical IC and shadows/ghosting the problem is either electrolytic capcitor or video IC or convergence adjustment

Aug 18, 2008 | Mitsubishi WS-65809 65" Rear Projection...

1 Answer

Mitsubishi big screen vs45605


I believe I have a convergence problem with my VS-45605, i cannot get the front panel controls to move the blue and red crosses. I dont have original remote and a universal remote doesnt work either, any suggestions.

Jul 24, 2008 | Mitsubishi VS-45605 50" Rear Projection...

1 Answer

Blue, red and green ghosting, curves in picture


convergance amp ic bad
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html

Oct 30, 2007 | Mitsubishi VS-45609 TV

1 Answer

Mitsubishi VS-60705


1. THE CONVERGENCE CAN BE RESET BY PRESSING "MENU 12596" TO ENTER THE CONV MISC. MENU THEN "8970" TO RESET.

Aug 21, 2007 | Mitsubishi VS-45605 50" Rear Projection...

1 Answer

Jvc av56pw74 blue shadow


You are going to need a full convergance alignment to rectify this issue.

Aug 09, 2007 | JVC AV-27720 27" TV

Not finding what you are looking for?
Mitsubishi VS-45605 50" Rear Projection Television Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1230 Answers

The Knight
The Knight

Level 3 Expert

75846 Answers

Jaime Hernandez

Level 3 Expert

2336 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...