Question about Hisense Televison & Video
Hisense TV EN2B27
You can use channels change button or if it's a smart tv you get mouse button let me know i will help you just sent me email me at firstname.lastname@example.org or whattsapp 00276097665
Posted on May 16, 2019
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Yes you can go into your display properties and look in the settings tab and look for advanced click that and open color tab or the overlay tab, color tab should get your brightness turned up, And if you can't see you can go into your bios and adjust your brightness from there and get it back to where you can see it if you can't write me back here so we can try another method. Ok I hope that helps you out somewhat, Oh yeah you can also hook up an external key board into your usb connections and you should be able to work everything from that too.
Posted on Jan 15, 2008
You can find the remote control codes for different brands
of devices from
If none of the codes work then we have two other solutions:
1. Searching For Your Code
If you have tried all of the set-up codes for your brand of equipment ,or your brand is not listed, and you are still not able to get the unit to respond, try the following procedure to search for your code.
If you don't find a code that works, the remote will flash four times when you reach the end of all the codes for this device type.
Make sure that the remote is pointed at your device during the search, You may have to press this sequences of buttons up to 100 times to search the entire library of codes.
2. Learn the buttons from the original
Line up your original remote and the head-to-head before completing the following steps.
Now you can repeat steps 3 through 5 to learn other functions onto other keys or press and hold SETUP until the Cinema's red light flashes twice to lock in your new feature. (If the red light does not blink twice, stop and repeat steps through 6).
To test the new feature, press and release the device key in which the new feature was learned followed by the key on which the feature was learned
More help for programming your remote can be found here:
Hope that helps!
If your issue is not resolved, please do not assign a rating just yet. Please post back as to what steps you took, results, etc, and I will try to assist you further as best I can. I am here at your service.
P.S. - You can rate a solution with one of four ratings as explained under (remember that at times a bit of to and fro dialogue may be necessary to resolve an issue).
Posted on May 05, 2008
SOURCE: login to router
Leave the username blank, then enter "admin" as the password. You can also reset the router to factory defaults by pressing the reset button on the back (small hole, use paper clip) and then try again.
Posted on Jun 23, 2009
Tips for a great answer:
Jul 27, 2018 | Hisense Televison & Video
Jun 19, 2018 | Hisense Televison & Video
Apr 25, 2018 | Hisense Televison & Video
May 30, 2015 | Hisense Televison & Video
Jul 22, 2014 | Cisco -Valet Wireless Router
Apr 03, 2014 | Lenovo Computers & Internet
Mar 07, 2014 | NComputing L300 Terminal Computer PC...
May 15, 2019 | Hisense Televison & Video
20 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: