Question about Konica Minolta Office Equipment & Supplies

Open Question

Bizhub c451 shows print ready but no sound of print and not printing from any tray. There is no error code and on the screen everything seems to be fine but not printing or any sound of printing. I have changed the main board, tray board and memory but issue still exist. please i need urgent help

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
ollysss
  • 7 Answers

SOURCE: Konica Bizhub's Trays

You will need to go to the printers folder under Start, settings, & select the C252, right click on it, select properties & go to the 'Option' tab.
In here input the C252's IP address into the 'printer name or IP address' field and select gather option information.
Once done you will need to apply the settings and ok.
If you dont know the IP address you can get it by going into Utility, user settings, print reports, config page.
You should now be able to select the correct trays without errors.

Hope this Helps.

Posted on May 21, 2008

Ad

SOURCE: Canon MF8180C "In Use/Memory" won't clear

http://support-au.canon.com.au/contents/AU/EN/8000123601.html

Posted on Jul 31, 2008

waqar697
  • 67 Answers

SOURCE: Konica Minolta BizHub C451 printing red lines down documents

your imaging unit is damaged. call minolta guys to have a look it at and change it if neccessary

Posted on Mar 30, 2009

  • 7 Answers

SOURCE: need written instructions on how to reset Ip code Konica bizhub C451

there are two ways you can rea\set the ip address you can press utility counter administrator password is 12345678 the go to network ip address and you can chane it there if you know the ip address you can browse to the machine and log in as administrator and go to network and reset there

Posted on Aug 22, 2009

SOURCE: error code when copying... C6103 on Bizhub C451

C6103 - Scanner overrun failure
The Scanner Home Sensor detects the Scanner at its home position during a period of time that begins with the time when a prescan command
and a scan preparation command are executed and ends when a home return command is executed.

Posted on Aug 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What can I do to remove Code Error C-D252 on Konica Minolta C451 bizhub


Do you have a print controller IC 409 with this machine need to know prior to continuing to trouble shoot.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Feb 17, 2018 | Konica Minolta Office Equipment & Supplies

1 Answer

My machine bizhub c451 display error code p6,p7, p9,p16, p21


Registration errors. Have tech come out clean IDC sensors and replace black i/u

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Feb 05, 2017 | Konica Minolta Bizhub C451 Copy-print-scan

1 Answer

My Konica bizhub c451 is showing p6p7p9p8 and it keeps sterbilizing without showing ready to copy pleas what do I do


Check the Transfer Belt assy,
Remove and Clean properly
Remove all Imaging Unit and shake properly and put it again.
P6/7/8/9 indicating all Imaging units are not in good condition.

So at warmup, color patch not getting properly generated

Dec 22, 2016 | Konica Minolta Bizhub C451 Copy-print-scan

1 Answer

Printer is only printing to the bypass tray instead of tray 1 where it should be printing


First, check your printer properties and make sure you are not telling it to go to the bypass tray.

If you are set to auto tray and its still trying to pull out off bypass tray. Check on the copier to make sure tray 1 isn't set for a special type of paper. If it is, change it to plain paper.

Sep 30, 2014 | Konica Minolta Bizhub C451 Copy-print-scan

1 Answer

How to reset error code c0105 on konica c451?


C0105 Tray 3/4 feeder transportation
motor turning at
abnormal timing

The lock signal remains LOW for a predetermined
continuous period of time while the
motor remains stationary.
1) Check the M25 connector for proper connection
and correct as necessary.
2) Check the connector of M25 for proper
drive coupling and correct as necessary.
3) M25 operation check
4) Change M25
5) Change PFTDB
6) Change PRCB

Jul 17, 2014 | Konica Minolta Bizhub C451 Copy-print-scan

2 Answers

Bizhub C451 error C-3924


c7ff0589-2c1c-428b-8214-5be985c427d0.jpgkonica minolta c451 printing problem

Jul 16, 2012 | Konica Minolta Bizhub C451...

1 Answer

Error message 3725 on Bizhub C451, how do i reset so I can print


Sir/Mam,
Turn off the main power switch located inside front door. Then holding down the utility/counter button turn the main power switch on. Close front door you must keep the utility button down also make sure that the sub power switch is on. This is the switch on the side of the control panel. The screen will show TROUBLE RESET touch it see OK then power off. YOU MUST WAIT TEN SECONDS BEFORE POWERING UP AGAIN!!!!!! If the problem goes away OK. If the code comes back you need a Fusing unit High Current Device for the fusing unit. Which will be expensive!!! Sorry:( DO NOT KEEP TRYING TO RESET THE MACHINE THE MACHINE IS TELLING YOU THERE IS A PROBLEM!!!!!

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Sep 24, 2010 | Konica Minolta KONICA BR BIZHUB C451...

2 Answers

I have a problem with a bizhub c451


sometimes especially when printing a pdf there is a box on the first print screen that pos up that says print actual size deselect that and then it will default and print on the paper that is available

Jun 16, 2009 | Konica Minolta bizhub 350 All-In-One Laser...

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6850 Answers

Adorjani Laszlo

Level 3 Expert

1316 Answers

George Mclaughlin

Level 2 Expert

364 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...