Question about Maytag MDE2600 Electric Dryer
How to I remove the top panel of the dryer?
You have a choice for which side front door should be on this model. There are 4 screws on front door. Take all 4 screws and pull down the front panel. You will see two metal parts each side which holds top panel. Remove two screws and metal parts. Now you can push up the top panel.
Posted on Mar 19, 2008
Catriver was right on the mark. Took a little bit of doing but I was able to fix the problem myself within 30 mins, and saved some money. Many thanks. I'd like to expand Catriver's solution a bit.
I found a layer of lint on the inside bottom of my dryer. With the face off of the dryer, it proved to be a good time to vacuum the lint out and reduce the potential of fire.
Posted on Sep 07, 2008
There should be a wiring diagram located where the electronics are in an envelope. Check for a fuse to the control board. Sometimes the fuse doesn't look like an ordinary fuse that we typically see on cars and things like that. It will appear to look more like a resistor. You need a volt meter to check if there isn't an obvious fuse on the control board.
Posted on Apr 18, 2009
open the door, remove the two screws holding the hinge and on the opposite side, pull the front panel towards you then lift off. you will then see two 5/16 screws holding the lid down.
Posted on Feb 08, 2010
Tips for a great answer:
Nov 20, 2013 | Maytag Neptune MDE5500AY Electric Dryer
on Apr 28, 2010 | Maytag Neptune MDE4000 Electric Dryer
Oct 13, 2013 | Maytag Neptune MDG9700A Gas Dryer
May 10, 2010 | Maytag PYE2300AY Electric Dryer
Apr 21, 2010 | Maytag Neptune MDG5500AW Gas Dryer
Apr 15, 2010 | Maytag Neptune MDE5500AY Electric Dryer
Feb 07, 2010 | Maytag Atlantis MDE7400AY Electric Dryer
Jan 25, 2010 | Maytag PYE2300AY Electric Dryer
Oct 15, 2009 | Maytag Neptune MDE5500AY Electric Dryer
May 24, 2008 | Maytag Neptune MDE5500AY Electric Dryer
243 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: