Question about LG Televison & Video
I had a power surge and after the tv now has no picture on the bottom 2/3 of the 60" screen. Sound is fine also. Do you think replacing the motherboard will take care of the issue
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Our LG 50" plasma tv screen went black after a popping noise but still had sound, after great diliberations decided to take the back off and have a peek!
We unplugged the tv and tested the fuses (there were three we could see) one had blown, the one on the left as you look at the back of the tv it also has one above it. We wrote the code/seriel number down and took the fuse to the electrical wholesalers Maplin and bought a pack of 10 fuses for £1.29 replaced the fuse in the tv and everything now fine!!!!!!
Hope this might be of use to anyone whose lost the picture after a loud popping/snacking noise but still has sound.
Posted on Jan 17, 2008
I have the same issue with my LG 42PC3DVA and I narrowed it down to the Y SUS board. After a little research there are a few items that are prone to go. The ceramic fuses (as you found), sometimes the capacitors on the Y SUS, Z SUS, and power supply go along with them You can tell because thy will be bulged at the top instead of flat. I replaced a few of my capacitors - they are only $0.89 each so it was MUCH cheaper than a board.
The other thing that is common on the Y SUS in particular are the FETs (also called MOSFET). They can be replaced if you are good with a soldering gun but they are static sensitive so be grounded. They are also a bit tricky to test so you may want to do some research on how to determine if this is the issue... or you can just replace the whole board.
Posted on Oct 28, 2009
Most a likely a problem with your Y-Sustain board which will then not drive the screen giving a black picture. The fuse on the board may be open circuit & need replaced but most likely you will need to have the sustain board replaced.
Posted on Oct 28, 2009
Tips for a great answer:
Apr 11, 2012 | LG Televison & Video
Dec 25, 2009 | RCA L42WD250 42 in. LCD HDTV
Sep 06, 2009 | Westinghouse LTV-32w4 32.02 in. LCD HDTV
Jul 08, 2009 | Element Electronics FLX2211B 22 in. LCD TV
Jun 30, 2008 | LG 42PX5D 42 in. Plasma HDTV
Aug 14, 2007 | Hitachi 62VS69 62" HDTV
35 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: