Question about Ricoh Aficio 450 Copier

1 Answer

Sharp 336 I got machine sharp showing me close the front door but I checked the sensor, still.

Posted by on

  • Abdou Nov 27, 2007

    I got Minolta DI351 with broken fusing and DI250 with working fusing.

    It's any risk to switch the fusing DI250 to DI351.

    I would like to have expert suggestion.




1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An user who is expert in 3 categories / brands.

  • Ricoh Master
  • 1,362 Answers

My suggestion is to check the relay in the back of the machine,
I used to get that code with a toshiba, In the back to the right there is a relay with a switch, sometimes it would pop the switch.
Another thing that caused that was a small transformer.

Not sure if sharp is the same.
good Luck

Posted on Nov 27, 2007

  • CheckitRight
    CheckitRight Nov 27, 2007

    They use a lot of the same parts in the fuser, except for the fuser rollers and the lamp.

    check the voltage and amps on the 250 if it is smaller than the 350 do not change if they are the same then try and see if it fits



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Code CH permanently display on Sharp AR6020 and all doors are closed.

There is most likely a issue with the door sensor if you are positive the doors are all shut. Make sure to double check the right side of the machine, and the top of the machine where the originals feed.

I’m happy to help further over the phone at

Feb 08, 2017 | Sharp Office Equipment & Supplies

1 Answer

Sharp ar 336 copier

remove the fuser unit and clean the thremister, but 1st turn machine off, upon reinstall of fuser enter service mode p*c* and choose 014 to reset the code, if that doesn't work you may need a new fuser

Nov 09, 2013 | Office Equipment & Supplies

2 Answers

Close front door message when front door is already closed

I am having the same problem... did you manage to resolve it? Let me know

May 16, 2013 | Saeco Xelsis Digital ID Automatic Espresso...

1 Answer

What is the finisher front cover? And how do I close it?

You are standing in front of it, the machine has sensors that sarround its operating peoperly therefore pay attention to its claims. closing is simply closing when you open the front door of the machine same way close it firmly but gentle, make sure everything inside is properly set accordingly to mini instructions inside the machine follow them they will guide you. The machine has atleast three doors the front and two side doors. look for them and just make sure they are closed nicely and properly.

Aug 01, 2011 | Sharp AR-M350U Copier

2 Answers

I installed the Sharp ar-5220 and received an error message. CH keeps blinking and does not allow me to press any buttons.

Make sure your toner catridge is installed properly then open the side door and front door , and close it properly the code CH means your machine door interlock is open. Vote for this rate this

May 27, 2011 | Sharp AR-5316 Advanced Digital Imager...

1 Answer

Hi when i turn the machine on it flashes ch

The "CH" in sharp stand for open door or cartridge not install, check that you close the door in the right order, first front then right door, check that you have the toner cartridge installed.

Dec 02, 2010 | Sharp AR-M160 Laser Printer

1 Answer

Ar 336 sharp copying machine code F1-05 please help

If you have a finisher on that unit ,that code is upper limit switch problem. Check to make sure your upper tray is in the right position. Otherwise your either your tab is broken or your led is popped.

Jan 02, 2009 | Sharp AR-5316 Advanced Digital Imager...

Not finding what you are looking for?
Ricoh Aficio 450 Copier Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ricoh Office Equipment & Supplies Experts


Level 2 Expert

412 Answers


Level 2 Expert

211 Answers

aaron douglas

Level 1 Expert

17 Answers

Are you a Ricoh Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides