Kennmore combo mod 417.917020000 dryer no turn on

Run it again and see if the error comes back. Note what it is.

That laundry combo unit was manufactured in October of 1994

Hi, The plug is not hooked up right...

Here is a tip that will help you with changing your dryer plug. Dryer Cord and Wiring Dryer 3 Wire or 4 Wire



heatman101

venting issue #3:

http://www.applianceaid.com/general.html#vent

http://www.partselect.com/dryer+dryer-wont-heat+repair.htm

Hi,

There can be many reasons why your dryer will not start or turn...

The most common causes are the belt breaking or jumping off, or the motor going bad...

Here are a couple of tips that I wrote will help you to figure out why your dryer will not run...

Dryer Repair - The Dryer is not Turning

Dryer Repair - The dryer will not start


heatman101

//

open the back and ur belt should be in bplane site us a flat head screw driver to remove and replace

my dryer work but it does not give heat ( kennmore 70 series)
model# 10062712101
ser: 1216293
i am trying to get the manual for my dryer from kennmore

take front switches out and connect wires that were not connected at factory