Question about Uniden Lands Phones
Phone rings, grab handset, nothing there, grab another handset and answer and I can sometimes catch the call. It often says line in use sometimes, often, Welcome, please wait driving me nuts running from phone to phone and often missing the call.
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Same thing was happening to my phone...Welcome! Please wait... After at least 40 hours of charging I was getting a little fed up. I picked up the handset, took a ball point pen and pushed the "activation" area on the bottom the phone...heard a click...now it is working. I don't think the tiny pin that comes with the phone activates the phone properly.
Posted on Jul 27, 2008
SOURCE: uniden 5.8Ghz phone.
You need to reset the main base unit. Unplug the power from the back of the base. While the power is disconnected, press and hold the delete key while reconnecting the power. Wait for a long beep tone. When the display shows 88 or P, press play button one time. If you have a phone without an answering machine, disconnect the power from the back of the base, press and hold find hs button while reconnecting power.
Posted on Mar 17, 2009
SOURCE: I just bought the waterproof
When you received your phone, there is a black button on the bottom of the phone with a note to "press here before use." You will notice that between the phone and the button there is a piece of cardboard to prevent the phone from being activated during shipment. Remove the cardboard and insert the black pin all the way into the small hole in the base of the handset. Tthis will activate your phone. Charge the phone for a full 24 hours after inserting the black button and activating the phone. The phone does not charge at all until the black button is completely inserted into the base of the phone.
Posted on Jul 07, 2009
It's even simpler than previously solved; The system administrator can correct this for you in a simple programming change. In the form Multiline set key assignment change the ring type from "No Ring" to "Ring" that's it, done! (I hope you enjoy the digs).
Posted on Oct 14, 2009
Tips for a great answer:
Mar 01, 2018 | Uniden Lands Phones
Jun 13, 2016 | Uniden DECT 6.0 Cordless Telephone...
May 19, 2014 | Uniden Dect 6.0 Dect4066 2-line Cordless...
Apr 30, 2013 | Uniden Lands Phones
Feb 18, 2013 | Uniden DECT 6.0 Cordless Phone with...
Feb 06, 2012 | Uniden DECT 6.0 Cordless Phone
Sep 10, 2011 | Uniden Cordless Phone
Aug 18, 2011 | Uniden DECT 2080-5 Quint Phone
Jan 20, 2008 | Uniden Cordless Phone
Jan 07, 2008 | Uniden TRU9480 Cordless Telephone
May 13, 2019 | Uniden Lands Phones
38 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: