SOURCE: Just installed my 2844
Bask11,
sounds like the printer needs to regap itself. Turn the printer off, hold the feed button down and while holding the feed button, turn the printer back on. As soon as it flashes, let go. It will regap itself. When it stops moving, press the feed button once and there should be a priinted line that says 'out of dump'. The printer should be ready to go then.
SOURCE: Label Printing Issue
Send the shipping label to the printer first in your software.
This isn't a printer issue. It only prints stuff in the order received.
Steve W.
LazerTek, LLC
SOURCE: Military Shipping Labels
If your not getting an error message I would suspect that the margins have somehow been set beyond the printable area. I don't know what the width on a "Military Shipping Label" is but I've had issues with Zebra label printers printing on the very edges of the labels.
SOURCE: prints labels too small
when you hit print, the window comes up and lists the printers available. If your printer is highlighted, click on preferences and click on the "effects" tab and there is a box with a percentage of size. Increase the percentage, if it is too small at 100%, try to bump it up to 125% etc.
SOURCE: Zebra 105SE label material will not retract in prep for next Lab
I agree. It sounds like your printer is set to Rewind. Changing the mode to Tear-Off should solve the problem.
59 views
Usually answered in minutes!
×