Question about Daewoo Washing Machines

Open Question

How I fix error code E1 in my washer machine daewoo inverter Dwc-vd1213

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 143 Answers

SOURCE: Cleaning a daewoo

You usually grab it by the front and pull, but there might some screws holding it in.

Posted on Jul 24, 2008

Ad
  • 1 Answer

SOURCE: error codes

just fixed mine
i cleaned the filters inside the water lines. disconnect lines where they go into washer use needle nose pliers to pull out screens clean with water and put them back.
this wasn,t the problem with my washer .
mine i took the cover off and found the clear hose from the drum to the water senser had disconnected reattached it with difficulty as i have big hands works fine now

Posted on May 06, 2009

aparsons89
  • 40 Answers

SOURCE: E1 ERROR CODE

Found the answer on the Uniden Site. Here is the Link to the Answer. http://www.mycusthelp.com/uniden/supportkbitem.asp?sSessionID=&Inc=1691&sFilA=Product&sFilB=Model&sFilC=&FA=4&FB=-1&FC=-1&KEY=error%20codes

Posted on May 14, 2009

r_dawg
  • 50 Answers

SOURCE: daewoo a/c parts

www.Daewoo.BizRate.com mite beable to help

Posted on Jun 27, 2009

ginko
  • 19396 Answers

SOURCE: Daewoo Washer Error E8

Hi.

E8 is fault connection from CCU (Control board) to balancing sensor.

When you get E8, this is often because of a faulty control board.

Try first disconnecting power for a couple of minutes, to reset the appliance.

If you still get E8, then you need to call a technician. Testing is done jumping the two wires to the sensor to bypass the sensor, then replacing either sensor or control board.

If you want to arrange a repair, then you can call the phone number listed on the machine owners manual.

Regards.

Posted on Nov 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My DAEWOO washing machine shows E9 error . How can I fix it.


Following is a summary of your problem:

Daewoo Washing Machine Error Fault Code = E9
Fault Detected: Pressure Sensor Error
Washer Has Detected: Error with the pressure switch or level sensor
Check / Repair / Fix = Wiring to level sensor - Level sensor

You can check Daewoo Washing Machines' all Error Codes on the following link:

https://removeandreplace.com/2015/11/02/daewoo-washing-machine-error-fault-codes/ Daewoo Washing Machine Error Fault Codes
Check the following link also:
http://www.ukwhitegoods.co.uk/help/fault-codes/laundry-fault-codes/3369-generic-daewoo-washing-machine-and-washer-dryer-fault-codes
daewoo-washer-error-codes-f-and-led-lir00bwurrp323t4upe44oy3-4-0.jpg
http://www.ukwhitegoods.co.uk/help/fault-codes/laundry-fault-codes/3369-generic-daewoo-washing-machine-and-washer-dryer-fault-codes

Feb 05, 2018 | Daewoo Washing Machines

3 Answers

Error E1 for washing machine


Lots of info on E1 for different makes.

  • How to repair a Samsung washing machine with error code E1 ... https://www.quora.com/How-do-I-repair-a-Samsung-washing-machine... How do I repair a Samsung washing machine with error ... If your Samsung Washing Machine is showing error code E1 then ... How do I clear bosch washing machine error ...
  • E1 error in washing machine? ' Yahoo Answers https://in.answers.yahoo.com/question/index?qid=20131129013237AA7oiKP
    • RESOLVED
    • 7 POSTS
    • 6 TOTAL ANSWERS
    2013-11-29 · E1 error in washing machine? ... Haier washing machine error code E1? LG Wave Series Washer LE error message? Washing machine error code? ...
  • My washing machine is displaying an error code. What does ... www.samsung.com/my/support/skp/faq/1033803 My washing machine is displaying an error ... E1. Water supply error. ... · Check that the level of the drain hose is not lower than the base of the washing machine.
  • Related searches for Error E1 for washing machine
  • Samsung Washing Machine 4E and E1 Fault - Help & Advice https://www.northlondonappliancerepairs.co.uk/error-codes/samsung...
    • 4.3/5
    • 46 RATINGS
    Samsung Washing Machine 4E and E1 Fault. Samsung washing machine Not filling in allocated time error code 4E and E1 Fault.
  • Help & Troubleshootings - Haier ZA Products Website www.haier.com/za/help_and_troubleshootings/faq/washing_machine Help & Troubleshootings. ... Too much water in the washing machine ... Error Code-control panel display "E1" Question : Error Code-control panel display "Lock"
  • Samsung washing machine error code 4E and E1 Fault Not ... www.youtube.com/watch?v=cFlnxeB0P0g
    • BY HOW-2-REPAIR.COM
    • 9 MIN
    • 19K VIEWS
    2015-11-24 · Video embedded · ... machine-error-code-4e-and-e1-fault-not-filling-in-allocated-time/ Samsung washing ... Samsung washing machine error code 4E and E1 ...
  • Samsung washing machine error code 4E, E1, Fault Not filling www.how-to-repair.com/help/samsung-washing-machine-error-code-4e... Samsung washing machine Not filling in allocated time error code 4E and E1 Fault This is essentially a fill timeout error which will normally mean that either the ...
  • Hoover error code E1 - White Goods Help www.whitegoodshelp.co.uk > ... > Washing Machine Error Codes Hoover error code E1. ... You need to watch the washing machine to see when it aborts to get an idea which of the three areas to look at.

  • Jul 01, 2016 | Washing Machines

    1 Answer

    Model DWC-LD1421 WHAT DOES FAULT CODE LE MEAN ON THIS MODEL


    this is the code issue for the Daewoo washers things to check The washing machine or washer dryer door has been detected as open or unlocked.
    • Close the door!
    • Check the door lock switch
    • Check the door latch
    • Check PCB

    Mar 09, 2015 | Washing Machines

    1 Answer

    Daewoo washing machine model number DWC-LD1421 what dose the fault code LE mean for this model


    The washing machine or washer dryer door has been detected as open or unlocked.
    • Close the door!
    • Check the door lock switch
    • Check the door latch
    • Check PCB

    Mar 09, 2015 | Daewoo Washing Machines

    1 Answer

    My Daewoo DWC-UD1212 washing machine does not spin; and shows IE whenever the light indicator is on Spin. What should I do?


    not sure bout the IE error But I would check the clutch, the motor coupler, the door switch, and the belt if applicable?

    Feb 28, 2015 | Daewoo Washing Machines

    1 Answer

    DAewoo DWC-LD1013 will not spin


    The Daewoo DWC-LD1013 is a washing machine, you may wish to post your question in that category, not in air conditioners.

    Jan 09, 2015 | Daewoo Heating & Cooling

    1 Answer

    Daewoo DWC-UD1212 Washing Machine


    Washer machine when I select manual wash , LE letter show on program monitor , and washer machine is not work.

    Aug 29, 2013 | Daewoo DWDWD3011WW Front Load Washer

    4 Answers

    Washe machine problem


    The sound become beet? We need a little more detail. Look in the owner's manual and tell us what is error e9.

    Feb 26, 2007 | Daewoo DW500M Top Load Washer

    Not finding what you are looking for?
    Washing Machines Logo

    Related Topics:

    31 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Daewoo Washing Machines Experts

    Marvin
    Marvin

    Level 3 Expert

    84565 Answers

    Fahr Quad

    Level 3 Expert

    700 Answers

    Paul Bade

    Level 3 Expert

    1650 Answers

    Are you a Daewoo Washing Machine Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...