Question about Sony Cameras

Open Question

The camera of my Sony PCS-1 videoconference looks black and can not be moved with the control. The strange thing is that when the equipment is turned on the camera moves. What could be the problem?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: DSC-W50 sony cybershot

I had the same problem with my DSC-W55. I actually just called the customer service number on the sony website and they told me how to solve the problem.

- Take your battery out
- Press and hold the power button for 60 seconds
- Re enter your battery
- Voila.. it should work when you turn it on. Mine did.

Posted on Jan 20, 2008

Ad
  • 3 Answers

SOURCE: Sony PCS-1 Video Conference

Hi,

in order to help you:
- are you behind a firewall?
Sounds a lot like a firewall issue.

You may contact us for free troubleshooting:

Contact

Furthermore this is our detailed PCS-1P page.

Best regards,

Andy

Posted on Feb 19, 2009

pontelemon
  • 538 Answers

SOURCE: doesn't focus

Lens barrels are out of possition/damaged.

Needs service.

Posted on Mar 19, 2009

stonephoenix
  • 563 Answers

SOURCE: My Sony KDL-32M3000 is acting strange. When I

G'Day!

Unfortunately, what you're describing is a repair issue. You won't be able to address the problem with troubleshooting. There is a part inside the TV that needs to be replaced. If you're under warranty, this will cost you nothing. If you're not under warranty the cost will likely be a minimum of $200 parts and labor. However, be warned that the cost could be considerably higher.


I hope I've provided you useful assistance and that this information allows you to make an informed decision as to how to proceed from here. Please be sure to vote on my response. I hope I've earned a good rating from you today.

Please post a comment if you need additional assistance so that I can help you further.

Posted on Jul 12, 2009

t00nz
  • 4738 Answers

SOURCE: I turned the camera on and saw a black screen that

This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free worldwide, and may also include free shipping both ways (free shipping varies with countries). This is regardless of your camera's warranty status. Please check this link for more info.

Applicable cameras include: A40, A60, A70, A75, A80, A85, A95, A300, A310, S1 IS, S60, S200, S230, S330, S400, S410, S500, SD100, SD110, IXUS V2/V3/300/400/430/500/II/IIs, IXY Digital 200a/300a/320/400/450/500/30/30a

Posted on Apr 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Can you send me a diagram of the wiring for the tobishi DVD 7501


Hi David

Thanks but i don't have a lug for the speaker and the strange thing is that it has 4 wires , 1 red , 1 yellow, 1 blue and 1 green.
It also has another black input lug that looks like a shuttle control lug. I need to know how to get the sound out. the deck works perfect .

Sep 24, 2015 | Cars & Trucks

1 Answer

Reset the password on a Sony PCS XG80?


Go in menu (tools) and enter on the remote control "72". In the service menu choose reset the system. This should being you back to the original state.

Look at this link for details.

Sony PCS XG80 password reset Video conferencing Telepresence Forum

Feb 12, 2015 | Sony PCS-XG80 System Bundle - PCS-XG80/9DS

1 Answer

DCR-TRV255e Sony handycam shows black screen when recording. When inside and recording, the LCD and viewfinder are black, except for large sources of light. For example, everything will be black but I can...


I'm sorry that the Camcorder is displaying the error message. Please follow the troubleshooting steps provided below and check the operation:




1. Please insert a different disc and close the disc tray firmly.
2. Perform Reset by following steps:




1. Locate the RESET button behind the LCD panel of the camcorder.
2. Use a pointed object (like a ballpoint pen) to press and hold the RESET button for 2-3 seconds.
3. After 2-3 seconds has elapsed, release the RESET button.




3. Perform a manual power reset by following the steps:




1. Turn off the camcorder.
2. Disconnect AC power adapter.
3. Remove the battery pack.
4. Move the POWER switch to the CAMERA position for 15 seconds.
5. Move the POWER switch to the OFF position.
6. Reconnect the AC power adapter or reinsert the battery pack.
7. Turn on the camcorder.




If the issue persists after following all the steps service will be required. You can find repair information and initiate service at:




http://eservice.sony.com




Thank you for your time.

May 28, 2012 | Sony Handycam DCR-TRV22 Mini DV Digital...

1 Answer

There is a strange sound coming from my camera and vibrations


Hi there.
It sounds like the lens is having difficulty moving into position, cover the lens with your thumb and spray a little WD-40 around the affected area.
With the camera card, take it out, clean the contacts and blow down the slot to remove any dust that may have built up.
Make sure the camera is turned off while you spray it.

Good luck and thanks for choosing FixYa!!

Jun 02, 2009 | Sony Cyber-shot DSC-T100 Digital Camera

1 Answer

Canon G7 lense does not extend fully but it is NOT e18


Maybe lens needs adjustment. The info on this page may help. Copy and paste this link for more info.


http://www.fixya.com/PostAnswer.aspx?thid=1841738&prdid=447928&ctgid=67

Mar 22, 2009 | Canon PowerShot SD500 / IXUS 700 Digital...

2 Answers

My SE G502 camera be strange..the screen colors are being green and purple..and separate to be 2 small screen..but my camera's lens is in good condition..


Here are a few things to try:
1. Verify that the camera is in good condition. Here's How: Take a photo and transfer it to PC (using USB or BT). Check if the picture is good. If not, you know the culprit is your camera.
2. If the picture looks good on PC, your G502's screen is bust and you should get it fixed under warranty.

Jan 29, 2009 | Sony Ericsson G502 Cellular Phone

2 Answers

Sony PCS-1 Video Conference


check for your lan settings, try to see if there is no nat on one of your network make the nat settings

Jan 11, 2008 | Sony PCS-1 (PCS1) Video Conference

1 Answer

Upper part of pictures is black


This seems to be a CCD problem or associated circuits. Sony Support Team should know about this - may mean a camera callback or swap from Sony.

Jun 24, 2007 | Sony Cyber-Shot DSC-F717 Digital Camera

1 Answer

Use the camara for videoconference


What program are you using? My camera works fine with Windows Messenger. Worse case scenario go to the canon website to download the necessary files.

Feb 01, 2007 | Canon Elura 60 Mini DV Digital Camcorder

4 Answers

Black LCD screen on camera


Hi! Just had the same problem (black display) on a Pentax Optio 330GS(?). I moved my hand in front of it and took pictures of things but nothing happened. Then my girlfriend tried to point it to a lamp, and all-of-a-sudden it kinda woke up from a screensaver or something. So weird, but it worked. Perhaps it needs enough light in order to start using the display and lens. I couldn't take any pictures when the LCD was black. So, try pointing it towards a strong light source before you break your camera.

Sep 08, 2005 | Sony Cyber-Shot DSC-P31 Digital Camera

Not finding what you are looking for?
Cameras Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Cameras Experts

james laughton
james laughton

Level 3 Expert

2195 Answers

JonSnell Electronic
JonSnell Electronic

Level 3 Expert

29841 Answers

Dan Dangel
Dan Dangel

Level 1 Expert

42 Answers

Are you a Sony Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...