The third setting
SOURCE: What is the function of both the Auto and the High setting on the cooker?
I am not sure if it is the same as the Durabrand model I have but mine heats the food to boiling and then cooks and lowers the temperature automatically, it is handy if you are late preparing a meal, for example 12 noon and you want it ready for 7pm? Hope this helps. High settings usually boil quickly and is handy to use for the first hour after that reduce the temperature and you can knock at least an hour off the cooking time. Or you can use high throughout the meal and halve the slow cooking time, however this uses much more electricity than on slow.
SOURCE: ronson slow cooker don't know which is high or low
on setting 1 (low),the slow cooker can operate all day and night if required
when set to 2 (high) it is very much like a covered pot on the stove.food will cook in half the required time
AUTO the slow cooker will cook on 2 (high) until the food reaches a pre-set temperature,then switches to 1(low) and maintains a constant slow cooking temperature.Auto is ideal for someone who is leaving the house for the day 8-9 hours please feel free to share this information.If you have any more ? please fell free to contact me.
bianca
SOURCE: tower slow coocker switch setings auto
low runs around 225
high about 275 some models go as high as 300
auto it will cycle between high and low depending on moisture content
SOURCE: Whats the differences with the low high and auto
The difference is the time and how warm it cooks. Low cooks a slow, lower heat - cooks 6-8 hours. And High is a faster cook at 4-6 hours. I tend to use low for stews and chilis.
2,036 views
Usually answered in minutes!
×