Question about Logitech Bluetooth Wireless Headphones

1 Answer

Setup Bluetooth Wireless headphones

I recently had a crash and have been trying to reinstall the bluetooth wireless headphones and cannot get any connection. I have followed all the instructions but nothing works. Can you help?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Setup Bluetooth Wireless headphones

Each brand has it's own peculiarities and you did not specify the brand. I would suggest turning off the headphones, resetting the transmitter (turn off and on again for separate devices) and then pressing and holding the 'on' switch for 15 seconds or so. You may see (in some models) a light start to blink blue then red and back. This should indicate that the receiver (headphone) is trying to find a transmitter to pair with. Hope this helps.

Posted on Dec 14, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Can not connect to a laptop

Could be the laptop needs a driver installing for it to work.

Conventional bluetooth and wireless needs a 2-way signal so the item you want to connect will appear in the laptop wireless and bluetooth menus and you can click on it and enter a password or pin number.
If the headphones don't appear in the menus you won;t be able to connect them. In that case you should refer to the headphone instruction manual.

Apr 16, 2016 | Bluedio Model R - Wireless & Bluetooth...

1 Answer

How to connect wireless headphones to TV

The TV has to have bluetooth connection or a place to insert a bluetooth dongle, so the headphones can be paired with the tv

Feb 16, 2015 | Ematic Wireless Headphones and Transmitter

1 Answer

Can beats s450 be connected to any soundbar?

If the soundbar is Bluetooth-enabled, yes. But I have not read or heard about a Bluetooth-enabled soundbar yet. And why would you want to connect the headphones to the soundbar ? The only situation where this would make any sense is if the soundbar were hooked up to a TV. If this is the case, your only solution is to use regular (not Bluetooth) wireless headphones, which consists of two pieces: the headphones and a transmitter that you hook up to the audio output of your TV. The transmitter piece transmits any sound coming out from your TV wirelessly to the headphones.

Sep 27, 2014 | Beats By Dr Dre - Wireless Bluetooth...

3 Answers

Left ear phone does not work with bluetooth on the beats wirless

This worked for me! Just reset like the video. Had to do it a few times but working great now.

Apr 08, 2013 | Beats By Dr Dre - Wireless Bluetooth...

1 Answer

Connect windows 8 laptop bluetooth dre beats

I had the same problem earlier and tried to solve it... First make sure you re-install any bluetooth drivers that you had to delete if you upgraded from windows 7... I had to delete mine in order to do the upgrade. If your laptop comes stock with windows 8, search your computer's website for any bluetooth drivers that you should have. Once you have these installed, proceed. *This might work even without the above procedure so try it out* Right click your bluetooth icon and go to add bluetooth device. Then press and hold the on/off button on your beats wireless till the LED starts flashing blue... It should show up on your laptop. When it does, click on it and it should start the pairing process. Once it's done pairing, simply go to your volume icon at the bottom right of your screen next to your clock, right click on it and go to playback devices... In there, you should see your beats wireless headphones as one of the options. Select them and click 'Set Default'. Then go to youtube or your itunes and play away :)

Dec 26, 2012 | Beats By Dr Dre Beats Solo Hd Bluetooth...

1 Answer

Jbl 610 driver

Windows Vista should see the bluetooth headphones without any extra drivers. If you open your bluetooth options, and you can see the headphones, and it asks for a password, try 0000 or 1111.

Also - check your computer to ensure that it does have bluetooth capability. If the computer doesn't have bluetooth built in, you'll need to use the USB communicator that should have come with the headphones. If you don't have the USB stick that came with the headphones, your best bet is to contact JBL and see if they will send you a new one.

Another thing you can try, just to verify the headphones are good - is to try to sync them with an ipod or iphone and see if you can listen to music through them.

Nov 15, 2011 | JBL Reference 610 Wireless Headphones

1 Answer

How do I pair insignia bluetooth headphone with Ipod touch When I have my ipod search for bluetooth devices, it acts as if it does not see the headphones.

The Insignia headphones must be set to "pair".

With the headphones off, press and hold the power button on the headphones until the logo starts blinking red/blue. You are now in "pair mode". Have your Touch look for bluetooth devices and it should see it now.

Hope this helps!

Mar 29, 2010 | Insignia Bluetooth Wireless...

1 Answer

I need to get sound incoming with headset how do i do this?

Specifying if this was Windows XP or Windows Vista would make a difference in the fixing of this problem, I am going to explain for Windows Vista hoping that you are up-to-date on the most recent operating system.

Step 1: Locate your task pane in the bottom right corner of the screen.
Step 2: Playback options (I believe)
Step 3: Under "Playback" select your headphones from the list.
Step 4: Right click it and click "Set as default device"
Wallah, it should send the sound to your headphones now rather than the PC's output device, please note, once your not using the headphones anymore you must set the default device back to the normal speakers or you will have no spound.

Apr 27, 2009 | Insignia Bluetooth Wireless...

2 Answers

Bluetooth headset won't connect in Vista

I had a similar problem. First part of the solution is to disable the headset profile for the headphones. These headphones can't handle both headset and headphone profiles at the same time. Second part of the solution is to make sure that your headphones are on when you activate bluetooth on the computer. For some reason, Vista doesn't like setting up the initial connection on-the-go, so it will just act like its connected and move on. Hope this helps!

Dec 07, 2008 | Insignia Bluetooth Wireless...

Not finding what you are looking for?
Logitech Bluetooth Wireless Headphones Logo

Related Topics:

796 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech Headphones Experts

Ml Howard
Ml Howard

Level 1 Expert

17 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

9503 Answers

ray gallant

Level 3 Expert

34649 Answers

Are you a Logitech Headphone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides