Question about Toshiba 55H70 55" Rear Projection Television

1 Answer

No Sound I hooked up a surround sound system to my tv now no sound comes from tv when surround system not on. I have dual audio output on my Directv reciever but cant seem to get it to work.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert that hasĀ over 500 points.


    An expert who has answered 200 questions.

  • Expert
  • 375 Answers
Re: No Sound

Bring up the menu and activate the skeakers on/off feature ,also look in rear for internal/external switch .

Posted on Dec 16, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

2 Answers

I have audio cables going from HD 61g887 jvc tv, to my phillips surround sound system under aux but it is not giving me sound?

you didn't mentioned the model number of your surround sound system, for a better solution its important. any why try the following.

if you are connected the analog audio output of your tv to the system using RCA cable, then go to the setup of the surround sound system and change the input assignment setting from digital to analog.
If your connected the digital output of your tv to the digital input of your surround system using optical cable then, goto the setup of your surround system and change the input assignment to digital (optical) input.

if u need any further assistance fell free to contact through fixya

Jan 20, 2011 | JVC HD-61G787 61" Television

1 Answer

Hook up sony blu ray

You should be able to hook it up with a component video cable. A component video cable is a cable that has 5 color coded RCA style ends that are Green/Blue/Red/White/Red. The Green, Blue and one of the Reds is for the video and delivers the signals needed to produce the HD picture and the White and the other Red is for the audio to provide you with stereo sound.

The Video cords will plug into the section labeled component video facing up and down and the audio will plug into the side by side section. So if you plug into Component input 2 then you would plug in the audio into the audio section of input 2.

If you have a separate surround sound system you can connect one of two ways.
1. Plug a separate Audio (red/white) cable from the Blu Ray to an available input on the surround sound.


2. Plug all inputs into the TV (as noted above) and then plug a separate Audio (red/white) cable from the tv labeled "Audio Out" to an available input on the surround sound system.

Jan 03, 2010 | JVC AV-48WP30 48" Rear Projection...

1 Answer

I have an LG LCD TV (LG 37LG5000 37IN). I also have an older DVD Home Theatre System (SONY DAV-DZ100). It seems that the surround system works well with DVDs but I cannot get the sound to work with DIGITAL...

It works fine if you plug the surround system SCART lead into the AV2 input. I believe this is a 'smart' scart plug (same as SONY but it is not mentioned as in the literature). The AV1 is only good for inputs NOT outputs as well.

Oct 04, 2008 | Projection Televisions

1 Answer

Sharp LC-37D6U Aquos audio problem

Your Aquos does not have a separate Audio board, audio circuits are mainly on main pcb. If the guy was able to fix the problem by hooking a surround to the audio out, that means that is a problem with speakers contacts or with one of the outputs.
Borrow a surround or use an amplified speakers set and check if you can fix it with this trick.
To do a real fix, a technician must open the tv, and test all audio connection, and onboard connection to audio outputs to see what is wrong.
If TV is going to work with a surround you will probably get a far better audio quality than the one you get now from TV speakers.

Aug 20, 2008 | Projection Televisions

1 Answer

No sound from our WD-52525

does the picture clear?if does,check the sound output from the earphone if it is clear,if the sound is clear the problem is in the audio amplifier

Jul 21, 2008 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

Receiver compatible with tv

yes digital suround sound is optical spdif k like coxial digital if it dont have analog outs or does it have headphone jack in front run a eth in mini jack to rca offf that to video 1 of sterio ok

Feb 10, 2008 | Projection Televisions

1 Answer

No Audio Out to Stereo Reciever

First have you went in menu and check audio to see if you are on the variable audio or external output? Check to see if this makes a different with audio jack hookedup correctly of course!

Sep 11, 2007 | Hitachi 51F510 51" Rear Projection...

Not finding what you are looking for?
Toshiba 55H70 55" Rear Projection Television Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

The Knight
The Knight

Level 3 Expert

66578 Answers

Are you a Toshiba Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides