Question about Crosley CAWC529JQ Top Load Washer

1 Answer

Crosley CAWC529JQ1 top load washer LEAVES LINT ON CLOTHING

THE WASHER LEAVES LINT ON MOST OF MY CLOTHING. iT IS SO BAD THAT i BOUGHT A STIFF BRUSH AND COUNTLESS AMOUNTS OF LINT BRUSHES TO PULL THE LINT OFF MY CLOTHING BEFORE i PUT THEM IN THE DRYER. a LOT OF MY CLOTHING i HAVE HAD TO THROW AWAY BECAUSE THE LINT STICKS TO THEM SO BADLY THAT IT IS IMPOSSIBLE TO REMOVE IT. iS THERE A LINT FILTER IN THIS WASHER OR IS THIS A NORMAL MALFUNCTION OF THIS MODEL? HELP

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 105 Answers

Try washing on a shorter time as this washer may have too good of wash action and the lint is fabric coming off your clothing
add more soap powder and do not buy the cheapest soap as the soap is important in the washing cycle of your machine
towels that are not too soiled brobably need 6 minutes at most on wash
if this machine has a delicate wash cycle use that for tee shirts etc
water pressure is important in rinse cycles
do you have high pressure and water only trickles in check water inlets on back of machine where the hoses screw on
good luck

Posted on Mar 16, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Lint all over Clothing after rinse.


My washer accumulates lint between the wash tub and the outer chamber. Whenever you wash a load, all the past dried up lint gets reactivated into the new wash water.

If you get a refrigerator or dryer lint brush, you can reach this area and brush out the accumulation. Also the area above the wash tub can get clogged with lint. If you look under the lip between the tub, you can see the fabric softener/bleach channel dispenser, a lot of lint can accumulate there as well.

Clean both areas after a recent wash load when the lint has softened and is easy to scrub off. For safety's sake, unplug the washer. Be ready to be grossed out! I clean my washer every now and then to keep the lint down.

The washer will smell nice and clean after getting this lint/dirtball out. To maintain this lint free environment, see below.

If this fails and is not the problem, go to a thrift store and purchase the cheapest 100% pure wool clothing, some dark colors, and some white. The wool acts like a magnet for lint and will attach itself to the wool before it attaches to your clothes. It can be used over and over if you hang it out to dry. It will get felted and covered with lint.

Mar 15, 2014 | Roper Washing Machines

1 Answer

Machine leaves lots of lint on clothing


Check lint filter and clean. Make sure you don't leave any Kleenex's in the dryer.

Oct 06, 2009 | Fisher and Paykel WA37TG1 Top Load Stacked...

2 Answers

Kenmore 80 series washer leaves soap residue on clothes no matter


After speaking with someone with trouble shooting experience in these matters, I now believe the problem lies NOT with the washer but with a bad batch of laundry detergent which fails to dissolve properly in the water.  

Mar 12, 2009 | Kenmore 22422 Top Load Washer

2 Answers

Clothing are left with lint after washing cycles


Seperate fluffy linty clothes and wash those separately; never mix that stuff up. Also keep the dark and lights separate.I do a number of smaller loads that are in a lot of water; you get cleaner clothes and less wear. Overloads are hard on the washer and the clothes. Rots of Ruck.

Feb 04, 2009 | Maytag PAV2300 Top Load Washer

2 Answers

GE top load washer w/no lint trap leaves excessive lint


Most US-sold washers made after the mid 1980s don't have lint filters. The manufacturers weasel-word around it by saying that the lint "goes down the drain", leading people to optimistically assume that there is a self-cleaning filter in there somewhere. There usually isn't and whatever lint doesn't go down the drain is filtered by your cloths (but whatever does might clog your septic system). As a result of this scam, it's much harder to hang-dry or iron-dry clothes that haven't been hand washed. And, if you think spending $2000 on a pair of matched "front-load" style machines will solve this, you might be wrong; many of those washers still have no lint filter.

Jan 08, 2009 | GE WBSR3140DW Top Load Washer

1 Answer

Kenmore 92274100 washer leaves lint on everything


Be sure to use higher water level on machine, don't overload machine Seperate lint givers from lint attractors. There is a lint catcher mounted on the bottom of the spin basket but it is self cleaning.

Jan 01, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

LINT STICKS TO MY CLOTHES IN WASHER


linting is caused by a few things
firstly what sort of soap poweder do you use
i recomend good quality powder
do not wash clothes too long as what you are doing is rubbing all the fibres out of them
good quality washing powder only last about 6 minets in water and after that it looses its qualiteseg
the PH changes in the water
you may be using too little soap powder and this also depends on water quality eg too hard or soft water
is the water levels set corectly
do not mix washing
eg towels with jeans as the lint will come off onto jeans
try using delicate wash on different fabric as the adgitation is different on different cycles
try using warm wash and not cold machine is probable ok but wah times are important
good luck

Nov 27, 2007 | Crosley CAWC529JQ Top Load Washer

1 Answer

Crosley CAWC529JQ1 top load washer sounds like a cement mixer!


sounds lik the main bearings are faulty and needs a strip down to replace parts otherwise another machine may be in order

Nov 21, 2007 | Crosley CAWC529JQ Top Load Washer

1 Answer

Crosley caw5923mqd Top Load washer spins but leaves A LOT of water in the clothes


have you checked the pump out of the maachine
the pump may be blocked restricting water flow
if that is ok maybe you need to give the n
machine a hot wash the seals may be draging the spin down

Oct 12, 2007 | Crosley CAWC529JQ Top Load Washer

Not finding what you are looking for?
Crosley CAWC529JQ Top Load Washer Logo

1,670 people viewed this question

Ask a Question

Usually answered in minutes!

Top Crosley Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Charles T Nevin
Charles T Nevin

Level 3 Expert

4070 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1474 Answers

Are you a Crosley Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...