Question about Audio Players & Recorders

Open Question

How to fixed exposed wire

I have a model QS-HXEP510 MODEL JAM TRANSIT MIRCO SPORT BUD THAT THE WIRES WERE EXPOSED AND IT WONT TURN ON AND ITS BLINKING WHILE CHARGING HELP ME!!!!!!!!!!!!!!!

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
pgh_pa_guy
  • 2992 Answers

SOURCE: exposed wires

If the critter chewed through the range cord insulation (from the outlet in the kitchen to the stove) you can get a replacement at most home centers or a well-stocked hardware store. The connections are made to screw terminals under a cover behind the stove. Take the old one along and match it to the new one. Be sure to tighten the screw terminals very securely when you put on the new one. (Obviously, you unplug the stove before doing any work.)

If the critter has chewed through the electric supply line to the stove outlet, call a licensed electrician to replace the damaged portion. You need to have the work done by properly licensed people to keep your insurance company happy, and often to stay legal with local codes as well.

Posted on Nov 20, 2008

Ad
  • 1861 Answers

SOURCE: 92 Celica ST model. Exposed wiring in running lights.

The fuse box in under the dash, up high, close to the drive-side inner fender. You cannot see it if you are NOT laying in the driver side footwell looking upo to the left.... it is rectangular, about 3-4 inches long x 2 incles wide. Possibly a black or cream coloured cover.

Posted on Dec 30, 2008

guru_fixya
  • 944 Answers

SOURCE: my sony ericsson w995 wont charge properly i have

hi,
The good news is it s not phone problem so you can be relaxed.
This is because of the chager wire at the join got damaged.you have to replace it.there is no other go...charges cost very less....Actually you should not roll you charger wire...It will get charged only when you hold in a position.In other position it will not charge....For time being you can bend the wire in direction in which it gets charged..keep some note book over it while it gets charged.....But you have replace it soon..

Please do rate the solution if the issue is resolved or post a comment for further assistance.


thank you for using fixya have a nice day:-)





Posted on Jul 25, 2010

Testimonial: "THANKZ "

  • 23 Answers

SOURCE: oakley orokr ear bud repair

It will normally be the wires that run through to the speakers, I have 20 replacement wires, its not easy to replace. I offer a set price of $50 to repair them if you are interested. I also have the replacement batteries and lenses

Posted on Jun 11, 2012

  • 157 Answers

SOURCE: 2006 ford transit ex ambo wiring diagram

where i live we goto the public library. another option is to subscribe to an automotive publication company. like mitchell,online. or ALLDATA look it up in their database. another idea is to seek help where you purchased the vehicle. one piece of info i can tell you about OEM schematics is they are supplied by HELM publications. i personally dont download schematics off the internet anymore. thieves and scam artists can sometimes hide behind them with their problem viruses or programs. since its a ford and its power windows, you can also get advice from ford motor company

Posted on May 25, 2014

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My tablet is asking for a code for my jam transit mini buds ? They were working before!


Are you sure it's not a codec? If they are paired with any other device, they will not also pair with the tablet. Also. Try moving away from your modem or router, any USB 3.0 devices or any other outbound source of data transmission. If your tablet is a hotspot, turn off the hotspot option, pair the earbuds then try them, if that fixes it, you'll have to enable your hotspot after pairing your earbuds

Nov 10, 2016 | Office Equipment & Supplies

1 Answer

How do I find out why my front passenger window wont go up in a 2004 ford sport trac


check fuses for window. if ok remove door panel, use test light on connector to motor, down will light on one wire and up will light the other. if there is power try tapping the motor and see if it works, if it does or doesnt it needs a motor and I would recommend replacing the regulator as well. if no power to motor check wiring in door jam its covered with accordion looking boot. pull boot back and look for broken wires. this usually fixes the problem.

Sep 25, 2014 | Ford Explorer Sport Trac Cars & Trucks

1 Answer

Samsung home theater model ht z320t xaa wont turn on and light is blinking?


make sure none of the wires on the back of the reciever or speakers are touching one another. I have a sony surround system and was doing the same thing, come to find out my postive and negative wires where touching causing the system not turn on.

Aug 23, 2012 | Audio Players & Recorders

1 Answer

Turn signal stays on


You have a short in your braklight wireing or a exposed wire arcing volts. did you crash or something? Bad blinker box under stearing wheel little round relay? Could be many things!

Jul 21, 2012 | 1991 Toyota Pickup

2 Answers

SemiTrailer Wiring when I turn on my left turn signal all lights blink.


sounds like if its a 2 filiment bulb(1156) one of the filiments is touching the other and back feeding the signal,start by removing all signal bulbs and replace each with a new one as a test,also reground all grounds,if the signal cant find reference ground it will take the next path to find it,if this doesnt work then possibly you have wires in the frame bare and touching

Mar 18, 2010 | 2004 Dodge Ram 1500

1 Answer

How do you fix your turning signals if they stop working? when i would try to use my turning signals it would blink or anything


You may want to have the relay checked out. If you have a known working relay have it swapped with yours to see if they would work. If it does not you may want to check the wiring and the contacts. There might be an exposed wire or loose wire.

Sep 27, 2009 | 1995 Jeep Grand Cherokee

1 Answer

2003 ford explorer sport turn signals blink rear brake lights


The ford explorer sport track. Will have a short either at the plug of the multi-function switch or 6 inches down where the column bends the wires during tilt.

Sep 05, 2009 | 2003 Ford Explorer Sport

2 Answers

Turn signals blinking fast and have no rear lamp, even after changing bulb


Which bulg is just coming On but not blinking? that bulb is either bad or its GROUND IS BAD make sure the socket is nice and clean and find the ground wire and make sure its connected to a good clean ground if you have to make a new ground wire and connect it .
if you find this information helpful please give me a good rating and by all means contact me if you have any questions
www.aceautomotive1.com

Aug 10, 2008 | 2001 Ford Explorer Sport

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5686 Answers

The Knight
The Knight

Level 3 Expert

76099 Answers

Marvin
Marvin

Level 3 Expert

85108 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...