Question about Mitsubishi WS-55819 55" Rear Projection Television

1 Answer

BLINKING GREEN LIGHTS IN FRONT

There was a a brownup in my area for about 6 hours and when it finally came back up, the green light was blinking, I tried to reset using the reset button it didnt worked. I unplug it and then waited for about 4 hours and then plug it back on still didn't worked.

I have a Mitsubishi WS-55813 television. The little green light is flashing slowly. How do I re-program this so that I can watch my television?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 179 Answers

Check C9B01, C9B02, C9B10, and C9B11 (1000 UFD 16) on the DM PCB, if they are bad replace them with part # 181P734030..if they are ok then the DM pcb itself is bad part # 934C067002

Posted on Nov 29, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tv will come on but shuts itself back off


Sounds like it just needs a new lamp.
The way to tell is the lights in front:
green blinking as TV reboots = bad lamp
red three blinks = door switch
red four blinks = bad fan
6 or 9 blinks = bad thermal fuse

Dec 17, 2010 | Sony Grand WEGA KDF-60XS955 60" Rear...

1 Answer

6 red blinking lights


You have a bad thermal fuse.

Oct 23, 2009 | Televison & Video

1 Answer

Canon pixma mp-610


Try resetting the printer:

1) Close the print head cover, and turn off the printer. While pressing the Resume/Cancel button, press the Power button. (Do not release the buttons. The LED lights in green to indicate that a function is selectable.)

2) While holding the Power button, release the Resume/Cancel button. (Do not release the Power button.)

3) While holding the Power button, press the Resume/Cancel button three times, and then release the Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the LED lights alternately in either orange or green, starting with orange.) During initialization, the LED blinks in green.

4) When the LED stops blinking and lights in green, press the Resume/Cancel button the 4 times. (Each time the Resume/Cancel button is pressed, the LED lights alternately in either orange or green, starting with orange.)

5) Press the Power button. The LED lights in green, and the
selected function is performed. (When the operation completes, the printer returns to the menu selection mode automatically.)

6) Power off then back on and test.

Jul 19, 2009 | Office Equipment & Supplies

1 Answer

Blinking lights


This exact thing just happened to me. I tried EVERYTHING in the way of troubleshooting - turned printer off/on, plugged/unplugged, opened/closed top, pressed all the buttons on the front right - FINALLY, I took out and put back in both ink cartridges and the light finally went to just green, as it should be AND it printed! Hope this helps!

Jul 31, 2008 | HP DeskJet 5550 InkJet Printer

2 Answers

Red and Green lights are together blinking continiously


I had this problem. The cancel button was stucked. Open the toner tray and slighly push the button side top-cover up. It released the cancel button for me (actually I was trying to open the top, but it worked). The cancel button was released and the blinking red-green stopped. Printer now working.

Mar 03, 2008 | Samsung ML 1610 Laser Printer

2 Answers

Sony LCD television will not power on.


I get 5 blinking red lights for about a minute or so before it powers back down. The Sony TV has a specific light that i presume is supposed to light up when the bulb is out. I'm unsure if this is what it is.
no picture, no sound. tries to boot with green light blinking a few times. then goes to red blinking light, six in all, then waits a few moments, then another 6 blinking red light.
Bulb was already replaced several months ago but we do have the TV on for long periods of time.

Jan 15, 2008 | Sony Grand WEGA KF50WE610 50" Rear...

2 Answers

Won't turn on. Constant blinking green light!


There are 4 1000uf capacitors on the DM board that prevent your set from completeing the boot sequence. replace these with the Radio Shack eqivalents and your problem should be resolved. The 4 capacitors are located right next to each other in a group. Hope this helps.

Jan 14, 2008 | Mitsubishi WS-65315 65" Rear Projection...

2 Answers

Green Blinking Timer Light Mitsubishi WD-62527


hold the menu bottun for 10 seconds
after press power

see if that works

Sep 22, 2007 | Mitsubishi WD62527 62 in. LCD HDTV

Not finding what you are looking for?
Mitsubishi WS-55819 55" Rear Projection Television Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1213 Answers

The Knight
The Knight

Level 3 Expert

75178 Answers

Jaime Hernandez

Level 3 Expert

2335 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...