Question about Canon CanoScan N340P Flatbed Scanner
1st to do is turn computer off, restart and re down load the cd's that came with the computer.
Posted on Nov 27, 2007
Tips for a great answer:
Unpack your new scanner and set it up. Follow package directions and setup instructions to assemble any parts that need assembly.
Plug in your scanner and power it up.
Insert the setup CD in your CD-ROM or DVD drive. It should autotomatically run. If it doesn't, click on "My Computer" and then on the CD or DVD drive to open the CD. Look for a Setup.exe file. Double-click on it to launch the setup disk.
Follow the onscreen prompts to complete the end-user agreement and install the necessary drivers and software to run your new scanner.
When prompted, connect the USB cable to the scanner, then plug the other end into the USB port on your desktop PC.
Windows will recognize that a new device is available on your computer, and find the necessary software and drivers to install it.
Restart your PC if prompted to do so.
Check all cable connections to be sure that they are secure.
Disconnect the USB cable from the desktop and the scanner.
Turn off your computer and let it cool down for 10 minutes.
Turn the computer on, then turn the scanner on. Reconnect the USB cable to the scanner. Try connecting the other end of the USB cable to a different port on your computer.
If none of these suggestions solve your problem, uninstall the scanner and start over.
Oct 02, 2010 | Epson Perfection 1670 Flatbed Scanner
May 06, 2010 | Epson Perfection 1250 Flatbed Scanner
Nov 12, 2009 | HP ScanJet 5550c Flatbed Scanner
Oct 27, 2009 | Scanners
Oct 07, 2009 | HP ScanJet 3500C Flatbed Scanner
May 30, 2009 | Plustek OpticFilm 7200 Film Scanner
May 26, 2009 | Packard Bell Packard-Bell Full Page...
Apr 04, 2009 | Epson Perfection 4490 Film / Flatbed...
Mar 12, 2009 | Scanners
Mar 11, 2014 | Canon CanoScan N340P Flatbed Scanner
41 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: