Question about Epson Stylus CX4800 All-In-One InkJet Printer

1 Answer

Printing black Hi, I print and the whole page comes out black. Any suggestions? Thanks

Posted by on

1 Answer

Re: Printing black

You need to give more info.  Does this happen with ALL print jobs from ANY program?  What do you see if you print preview before sending it to the printer?

Posted on Feb 16, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

3 Answers

My Samsung CLP 315w refuses to print a whole A4 page. Stops half way then message comes up paper jam but when I open back / front, paper not jammed and when I close it document continues printing then...


most likly hood is your exit sensor is faulty. The printer work in this way. if it does not print out all the document. it will print again. that is why you kept getting this same issue after a jam open and close door it will print again.

replace the exit sensor it will help.

Apr 16, 2010 | Samsung CLP-315W Laser Color Printer

4 Answers

Prints title and highlights of page does not copy the whole page

What are you printing from? the internet, (web browser), microsoft word? ...

What is the exact model of the printer?

Please inform me of this info and I will get back to you asap

Aug 04, 2008 | Lexmark Printers & Copiers

1 Answer

Black lines or smudge marks\running down the prints

Hello sir;The streak line from printing also should be from copy, because the line come from imaging unit, check the meter count if close to or over 50,000 then replace drum and drum blade, it will take care the problem.
The brother printer you need to replace imaging unit( drum unit).

Jun 01, 2009 | Brother Printers & Copiers

1 Answer

Hi We have Epson stylus photo 1290 for sublimation printing, and it keeps printing black splodges in the middle of prints, not in the same place each time, and not on every print. I can print a couple of...

Have the printer to perform the ink nozzles. If you have a continuos ink system place it at the same level than the printer.
Good luck and merry christmas.

Dec 22, 2008 | Epson Stylus Photo 1290 InkJet Printer

1 Answer

Copies and faxes come out with 5 inch black area over whole page

Does this same thing happen if you just print a report out of it?

Here's the logic behind this.

If it happens on scanning or copying, but not on printing that's a problem with the scanning section.

If it happens on everything (scanning, printing etc) that's a problem with in the printer controls.

Usually on lasers, if it's printing related, the first thing to do is change the toner.
If the imaging drum (which is part of the toner cartridge) is damaged, it will leave lines down the page.
This is a fairly common problem on refilled toners.

If you have changed the toner, and it still does it, it's a different problem.

Aug 11, 2008 | HP LaserJet 3015 All-In-One Printer

1 Answer

Printing problem

Since it sounds like you've gone through all the steps to clean the print head, I would suggest trying a new black cartridge. There may be a problem with the one you have.

May 27, 2008 | Kodak EASYSHARE 5500 All-In-One InkJet...

2 Answers

Printer not printing properly

When you changed the cartridges, the printer automatically prits a test / calibration page. This page must be placed in the scanner, then you have to press the "scan" key (the green one). It will calibrate an align the system. Then you'll be able to print.

May 03, 2008 | Printers & Copiers

1 Answer

Grey & Black Printing on everything

it appears that the printhead has a problem. try cleaning the printhead, via software. usually in printer prefs. also try running a few test pages. to see if you have any colours at all. if it,s only printing in grey scale. i.e grey-black. check the colour cartridges ink has,nt run out or blocked the nozzles.
Hope this helps Mike@Compurepair.

Feb 20, 2008 | HP DeskJet 9800 InkJet Printer

1 Answer

Printing black shaded on complete page

I assume you mean the pages are coming out dirty or gary versus white and black text.
change the drum/cartridge, if you get the same results it could be the hi-voltage power supply. most common is the drum.

Dec 13, 2007 | Brother HL 1430 Laser Printer

Not finding what you are looking for?
Epson Stylus CX4800 All-In-One InkJet Printer Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Printers & Copiers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers


Level 3 Expert

18257 Answers

Cindy Wells

Level 3 Expert

4718 Answers

Are you an Epson Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides