Question about Kyocera Office Equipment & Supplies
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Just a suggestion but in the application you are using, make sure the "Page Setup" is set to the envelope you need and the source for the envelope is correct.
Also, check the driver settings to make sure they match what the application needs.
Posted on Nov 19, 2009
The Call Service 2200 is a drum motor error. The motor or gears might need to be replaced. First remove and re-seat both the developer and the drum unit. The developer is directly under the toner cartridge - lift it up then out first, then open left side door remove the waste bin and press the button on the drum unit just above the waste bin pull the unit out (carefull not to touch the drum surface). Re-seat both units. If this does not work call in a Kyocera Tech.
Posted on Jun 09, 2010
In most cases the printer driver software can have errors while being in use or is shut down. So to reset remove your printer from the PC and uninstall the printer software. Now reinstall the printer software and then connect the Printer ONLY WHEN PROMPTED, to be detected as a new hardware as it will be installed. Now check the printer properties to see the ink levels. Thank you for using Fixya
Activate head cleaning before a test is taken. Sometimes it is possible that the head is not reacting to the need of the PC command or can be an issue with ink drying or poor ink cartridge contacts. Sometimes the power supply unit must be checked as a poor SMPS unit can deliver low voltage and cause issues to the printer function. Check all the leads and connections of the mother board , the tags to the ink cartridge. Also check the mechanical settings of the ink cartridge , if jammed or tight remove motor and manually free the drive before it is set back.
In most cases the printer driver software can have errors while being in use or is shut down. So to reset remove your printer from the PC and uninstall the printer software. Now reinstall the printer software and then connect the Printer ONLY WHEN PROMPTED, to be detected as a new hardware as it will be installed. Now check the printer properties to see the ink levels.
Thank you for using Fixya
Posted on Sep 26, 2011
Tips for a great answer:
Aug 01, 2018 | Kyocera Office Equipment & Supplies
Sep 21, 2016 | Copystar Kyocera FS-1135 MFP/DP...
Jun 10, 2015 | Copystar Kyocera FS-C2126 MFP Color...
Oct 17, 2014 | Kyocera "FS-3140MFP Printer, Copier, Fax &...
Sep 06, 2014 | Copystar Kyocera FS-1135 MFP/DP Printer
Sep 02, 2013 | Kyocera FS Office Equipment & Supplies
Mar 05, 2013 | Copystar Kyocera FS-1135 MFP/DP...
Oct 10, 2010 | Office Equipment & Supplies
Mar 24, 2009 | Kyocera FS-920 Laser Printer
Jan 14, 2009 | Kyocera FS-3900DN Laser Printer
Feb 20, 2019 | Kyocera Office Equipment & Supplies
22 people viewed this question
Usually answered in minutes!