Question about Equipex PZ-330 Electric Single Oven

1 Answer

Kenmore electric stove heating element how to replace

Heating element in oven burnt thru need to be replace

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert whose answer got voted for 20 times.

  • Expert
  • 161 Answers
Re: Kenmore electric stove heating element how to replace

A replacement is usually around $40. There are usually 2 screws holding the element in the back of the stove. Turn off the power and remove the element. There are usually only 2 wires. It really doesn't matter which goes where. Install the new element and see if it will shut off when oven reachers temp. If it continues to heat, there is another piece that needs to be replaced. If there is a contactor or relay replace it, If not the thermostat needs to be replaced. Sometimes when the element burns out it shorts to the ground and fuses the contacts forcing the element to stay on. Sometimes you actually have to turn off the power to the stove.

Posted on Jul 15, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Kenmore electric oven will not bake

The bake element
is the heating element that is found at the bottom of the oven. Most electric ovens use both the bake element and the broil element in a bake cycle, with the bake element performing 90% of the heating. If the bake element isn't working, the oven may not heat. To help determine if the bake element is defective you should first do a visual check. If the element is blistered or separated then it should be replaced. If the element appears to look normal, then turn the oven on to a bake function for a minute and then turn it off.

Check the element for signs of heating and if it is still cold then it may be defective. Disconnect the power and then remove the back panel. First check the wires as they may have become loose or corroded. If the element appears to be fine visually, test it for continuity with a multi-meter. If the element is burned or no longer has continuity, it will need to be replaced.

Apr 04, 2014 | Kenmore 40494 / 40495 / 40499 Electric...

1 Answer

Smoke comes out of top when cleaning oven. Oven takes way to much time to cook. Oven does not cook evenly. Items cooked in oven are burnt outside and almost raw inside.

hello jjm... these ovens have two heating elements. when one is bad they still heat but they bake way too slowly. this is the problem here. the fix is to replace the bad element but in my repair service I always replace both heating elements since when one goes the other is usually not far behind.

Apr 28, 2011 | Kenmore 40494 / 40495 / 40499 Electric...

2 Answers

Oven heating element will not heat up

If your electric2_bing.gif oven is not heating then you probably have a bad heating element in your oven. This is not that hard to fix yourself...
Check out this tip that I wrote about the Oven not heating problem..

Oven Problems Electric2_bing.gif Oven is Heating Slowly or Poorly


Asker's Testimonial " thanks i will have my husband look into that. " - 2gunsally

Aug 12, 2010 | Ovens

1 Answer

Oven is not working, burners on top of oven are working as well as the broiler.

The oven heating element is burnt out, you will need to replace the element, you can usually find at Home Depot or Lowes, if not in stock you will be able to order one from the store

Feb 01, 2010 | Kenmore 42161 / 42169 Electric Single Oven

1 Answer

Electric Oven is not heating up (BAKE)

Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} It could be that your lower element is burnt out or ready to burn out. They last 3-5 years depending how much you use your stove.
Disconnect POWER to the stove, remove the screws holding the lower element to the back of the inside of the stove, pull out carefully and remove the 2 screws holding the wires on. Check the element with an ohm meter, it should read 0 (zero or very close) resistance on an ohm meter. You may also take it to a store that sells replacements ($25) and they may check it for you.

Nov 13, 2009 | Ovens

1 Answer

Lower oven does not work. Ind. light comes on but no heat

It sounds like your heater element is burnt out. Get a volt meter.unplug the stove.take off the back,disconnet one of the wires connected to the element and test it. It should read aproximately 11 ohms if good. if a high or no readind,the element needs replacing.

Feb 16, 2009 | Kenmore 40494 / 40495 / 40499 Electric...

1 Answer

Heating element in GE Range Oven

get the model number and order the exact repacement bake element

Mar 10, 2008 | Kenmore 40494 / 40495 / 40499 Electric...

2 Answers

My ge spectra stove bake element is not heating

I have a GE Spectra stove. The top element over heated and broke in half.

Dec 18, 2007 | GE JKP20 Electric Single Oven

Not finding what you are looking for?
Equipex PZ-330 Electric Single Oven Logo

Related Topics:

1,202 people viewed this question

Ask a Question

Usually answered in minutes!

Top Equipex Ovens Experts

William Miller
William Miller

Level 3 Expert

8795 Answers

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you an Equipex Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides