Question about The Computers & Internet
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: when i try to turn
It sounds like you may have either a defective video card or RAM. To test the RAM, open up the RAM bay on the bottom of the laptop and remove one stick. If the computer still isn't starting, swap the stick that you took out with the one that is still inside. if that didn't help then you should take it in to the manufacturer for repairs. NOTE ABOUT HANDLING RAM: RAM is very sensitive to static electricity so be very careful not to touch the gold leads on the bottom. Good luck!
Posted on Mar 01, 2011
SOURCE: I have a Hayward HD100ID
Since this heater was only purchased last year, if it is faulty they should cover it under warrantee. If you call Hayward technical support they should be able to help you figure out what the next step is. I hope this helps.
Posted on Aug 08, 2011
Tips for a great answer:
May 30, 2017 | Blue Computers & Internet
Nov 20, 2013 | ASUS Google Nexus 7 8GB Tablet Unlocked...
Sep 03, 2012 | Acer AX1430-UD30P Desktop Computer With...
I had the same problem. The lid lock assembly is broken.
If you are under warranty get it replaced. If not remove the top of the washer
and take out the switch assembly. The 4 wires going in are Yellow, Red, White,
and Blue. If you short the white and blue together, the washer thinks the lid
is closed. If you short the red white and blue together the washer thinks the
lid is closed and locked. The yellow is only there to activate the
Disconnecting the switch assembly will not work.
The electromagnet locks the lid and it also unlocks the lid. It is not a matter of cutting the power to the magnet.
Installing 2 switches that connect the red white and blue is the best option if you want to remove the lock.
The first switch should connect the white and blue. (LID CLOSED)
The second should connect the red to the white/blue connection. (LID LOCKED)
After that the lid should work.
Please post a follow-up if this works for you.
Jul 09, 2012 | Maytag Centennial 3.2 cu. ft. SuperSize...
Jan 07, 2018 | Invacare Pronto M51 Power Wheelchair
Jul 27, 2011 | Ricoh Aficio 1035 Copier
Jul 23, 2011 | Hayward 100,000 BTU Pool Heater H100ID1 -...
Mar 12, 2010 | Dell XPS One All-in-One TV Desktop with...
Oct 20, 2009 | HP Pavilion dv6000t Notebook
28 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: