Question about Cell Phones

Open Question

Defiant locksetlocks when entering code and unlocks when enter lock

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 1257 Answers

SOURCE: Please Help Phone code N73

When you enter wrong code for more than 5 times your mobile gets locked,so if you enter master code/unlock code also your mobile will not get unlock.....
Solution :just switch off your mobile ,start it after 15 minutes and enter the unlock code i have given below i.e :5335036136
Your mobile IMEI no is :356406017443168

Just use this no to unlock your mobile :5335036136
This will definitely break your mobile security code ...........enjoy
-------------------------------------------
Please let me know your feed-back.

Thanks
dilipbagdi
Technical Associate

Posted on Apr 27, 2008

Ad
  • 1 Answer

SOURCE: 60GB ipod locked up (code forgoten)

i forgot my code, how to poen it? pls reply ..................i pod 60gb

Posted on Sep 20, 2008

  • 29 Answers

SOURCE: Phone Locked Enter Password

Yes. The code is either 0000 or 1234 but most likely 0000.

Posted on Dec 30, 2008

  • 122 Answers

SOURCE: How do you enter the SIM unlock code in a Firefly

YYou must insert a sim card that is not Cingulat/ATT brandeed and it will say enter special code Now! or Subsity code..
thnk u...

Posted on Apr 27, 2009

ipodslinger
  • 688 Answers

SOURCE: enter passcode screen is on, unable to enter code, appears frozen

you can fix it by restoring it in iTunes.
Here is a way to put it in recovery mode.
Normal 0 MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman";} Iphone and itouch dfu mode

Plug the usb cable into the Ipod and NOT into the computer.
Hold the Home Button down for 5 second (do not release it)
Then Press and hold the Power Button for approx 10 secs (count them out)
Your iPod will reboot.
Release the power button and continue holding the Home button for an additional 27secs.
You may see the screen go blank or not.
Plug the USB end into the computer with itunes open.
Your ipod will mount in recovery mode.
Restore it and Your all set.

Posted on Jun 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can you jailbreak a lg g800?


ow to Enter Unlock Codes on LG KB770: Insert an original simcard and turn phone on Enter sim PIN if required Enter 2945*#770# From the menu that pops up select "SIM unlock" Enter unlock code you received and press OK The phone will then reboot and the unlock is complete How to enter Unlock Codes to LG GB250 & GB220 Power on your phone without SIM card Enter 2945#*505# From the menu that pops up select "SIM unlock" Enter unlock code and press OK The phone will then reboot and the unlock is complete How to Enter Unlock Codes on LG GT505: Power on your phone without SIM card Enter 2945#*505# From the menu that pops up select "SIM unlock" Enter unlock code and press OK The phone will then reboot and the unlock is complete How to Enter Unlock Codes on LG KP100: 1) Insert a not allowed SIM card 2) Press the unlock button 3) Enter the code OR 1. Insert allowed SIM. 2. Booting (Request PIN Code, PIN Code enable) 3. In Idle Screen, Input the hidden number (2945#*20001#) 4. Input the number (above), go back to the idle screen 5. Menu-4.Settings, 7.Security-6.SIMLock Code:-1.Network Unlock Code:-1.Deactivate: 6. Select "1.Deactivate:" Menu, Display pop up " SIM Lock Code:". 7. Input right Unlock code, Display pop up "Deactivate". 8. Reboot, and unlock simlock code How to Enter Unlock Codes on LG KF390 and KF390q: 1) Insert a SIM Card from the network the mobile is locked to and turn it on 2) Insert the following sequence *#865625#; 3) Select 'Unlock USIM' 4) Select 'Network Lock' 5) Insert the unlock code 6) Reinsert the unlock code 7) Select OK. Done! How to Enter Unlock Codes on LG Prada (e.g KE850, etc): 1. Switch the telephone on with Original SIM card inside. 2. Enter SIM pin if required. 3. Enter 2945#*8501# and press the call button (middle button bottom of the screen). 4. SIM unlock mode will appear on screen. 5. Enter unlock code 6. Select Reboot. 7. Switch phone off, and then turn back on again. Phone is now unlocked How to Enter Unlock Codes on LG KE990 / KU990 Viewty: 1. Insert original sim card and turn phone on. 2. Press telephone icon at bottom of screen to bring up the phone keypad Enter 2945#*990# 3. A menu will pop up, select sim unlock: 4. Another menu will appear, select Network lock. Enter your unlock code and press ok 5. The phone will then reboot and the unlock is complete. How to Enter Unlock Codes on LG KG245 (Vodafone Australia): 1. Insert a Vodafone Australia working SIM card. 2. Ensure the phone is charged and then switch the phone on. 3. Optional Step: If the SIM card has a PIN, enter your PIN number 4. Wait for the phone to power up then enter 2945#*7101# 5. Select Menu , then go to Settings > Security > SIM Lock > Network 6. Select Deactivate and enter the 8-digit unlocking code provide for your handset. 7. The handset will be unlocked automatically and will display "Done". This will be confirmed if you can make and receive calls with the Non-Vodafone Australia SIM card. (You will need reception and phone credit with the different network provider) How to Enter Unlock Codes on LG KG800 or TG800 Chocolate: 1. With the phone in standby, enter 2945#*7101#. This will activate the extra menu. 2. Go to: Settings>Security>SimLock>Network 3. Select deactivate. Enter the unlock code How to Enter Unlock Codes on LG C2000: 1. Insert non-Cingular SIM card 2. Power on the handset - phone will display "phone restricted" 3. Select "Cancel" - phone will display "phone restriction code" 4. Enter the SIM Unlock code 5. Select "OK" - the handset is now successfully unlocked How to Enter Unlock Codes on LG U8150: 1. Switch ON your phone with a not allowed SIM card. 2. Compose: 277634#*#. 3. Go to menu "SIM Lock". 4. Enter the unlock code How to Enter Unlock Codes on LG INCITE CT810 Power on phone with original SIM card Type 2945#*810# In the menu that appears select Sim unlock Enter supplied unlock code Your phone is unlocked How to Enter Unlock Codes on LG F2250 Power on phone with Orange SIM card inserted While in the Start menu type 2945#*3311# Return to the startup screen Press Menu key Select Settings > Security

Jun 06, 2014 | Samsung Galaxy S GTI9000 Smartphone

2 Answers

I have a Defiant Electronic deadbolt from home Depot. model G1X2D01. ive lost the manual and i need to delete some old codes from it.


Snap off the back cover (opposite where you punch the numbers) by pinching the sides and pulling off. Do not press a pen or anything into the small light, you do not need too. Just pinch and yank off cover. You will see a small light and beside it is a small SET button by the batteries, it is labelled.. Press this Set button for 2 seconds. The red LED will light on the front code side and beep twice to indicate you are in programming mode. Enter your current code that you want to change (factory set is 12345) and then press the button that looks like a little lock on the keypad. Enter the digits "10" and press the lock button again. Enter the new code (must be six digits) and then press the lock button again. The red light should go on continously for 10 seconds. The code should be effective.
Note: if you have problems like we did, you can also remove one battery and press the "set" button simulataneously when you reinsert the battery. This resets the factory code of 12345. Then you can start over. For some reason our old code was only 4 digits, but it would not let us reprogram a 4 digit code. It didn't work until we did a 6 digit new code.

Apr 15, 2012 | Locks & Locksmithing

1 Answer

How to unlock motorzr z3


To Get the Motorola Rizr Z3 unlocked from network lock use the unlock code.....Buy the unlock code from the site Simpleunlocking.com and unlock it from network lock.Then use with any GSM Network Sim card......You can enter the Unlock code using the Free Unlocking instructions below:

Motorola RIZR Z3 Unlocking InstructionsWarning : Do not enter any wrong unlock codes on your Motorola RIZR Z3 mobile phones. If you enter over a certain amount of wrong unlock codes on your Motorola RIZR Z3 mobile phone, your phone may get hard locked and sometimes become unusable.
1 - Switch ON your Motorola RIZR Z3 with a NOT ACCEPTED SIM Card,
2 - Phone will display "Enter Special Code",
3 - You can now enter the Unlock Code.

NOT ACCEPTED: We mean, to use a sim card from a network other than the network your Motorola RIZR Z3 is locked to.

WARNING: If one of theses messages appear :

- "Contact Service Provider"
- "Tampert Alter"
- "Wait before enter special Code"
- "Contact Service'

Apr 04, 2012 | Samsung Cell Phones

2 Answers

Unlock code for motorola v50 vodafone


Try code from online site

Oct 16, 2011 | Cell Phones

1 Answer

How can i unlock my v220 phone


You can get the Unlock code at here
Mobileunlocksolutions.com and Unlock it from Network lock,then You can use with any GSM Network Lock,You can follow the instructions below and enter the code step by step.....

Warning : Do not enter any wrong unlock codes on your Motorola V220 mobile phones. If you enter over a certain amount of wrong unlock codes on your Motorola V220 mobile phone, your phone may get hard locked and sometimes become unusable.
1 - Switch ON your Motorola V220 with a NOT ACCEPTED SIM Card,
2 - Phone will display "Enter Special Code",
3 - You can now enter the Unlock Code.

NOT ACCEPTED: We mean, to use a sim card from a network other than the network your Motorola V220 is locked to.

WARNING: If one of theses messages appear :

- "Contact Service Provider"
- "Tampert Alter"
- "Wait before enter special Code"
- "Contact Service'

Sep 14, 2011 | Motorola Cell Phones

2 Answers

Cannot unlock it


You can call the service provider and Unlock it..

Aug 08, 2011 | Motorola Mobility i776 Cell Phone

1 Answer

How do I unlock a Motorola i680 phone


It's simple to Unlock Your Motorola I680 Model Phone from Network lock,You can use the subsidy code to unlock the Phone from Network Lock,You can get the code from here
Wickedunlock and Unlock it from Network Lock....You can follow the instructions below and Unlock it Step by step...

Motorola Brute i680 Unlocking InstructionsWarning : Do not enter any wrong unlock codes on your Motorola Brute i680 mobile phones. If you enter over a certain amount of wrong unlock codes on your Motorola Brute i680 mobile phone, your phone may get hard locked and sometimes become unusable.
1 - Switch ON your Motorola Brute i680 with a NOT ACCEPTED SIM Card,
2 - Phone will display "Enter Special Code",
3 - You can now enter the Unlock Code.

NOT ACCEPTED: We mean, to use a sim card from a network other than the network your Motorola Brute i680 is locked to.

WARNING: If one of theses messages appear :

- "Contact Service Provider"
- "Tampert Alter"
- "Wait before enter special Code"
- "Contact Service'

It's because you or somebody already entered too many wrong codes, you just have to leave the Motorola Brute i680 ON with the errors message and after 40 minutes to 2 hours the message "Enter Code Special" will appear again!

Jul 24, 2011 | Motorola Cell Phones

4 Answers

I want to unlock samsung sgh e250


In here http://www.wickedunlock.com/ - Wicked Unlock you can get your Samsung e250 mobile codes @ lowest costs.. Also in here we can get all GSM mobile codes...

Jan 20, 2010 | Samsung SGH2100SGH600V300 Unlock/Unlocking...

2 Answers

Forgot my security code please help for razr v3 motorola


If you want to unlock your Motorola phone to use it on another network, consider unlocking by entering a code. Code unlocking is the easiest way to remove the SIM lock of your handset. Just enter the code with the instructions below and it's unlocked. If you don't have a code yet, you can get one in my eBay store here:

How to Enter Unlock Codes on Motorola phones:

  1. Switch ON your phone with a not allowed SIM Card,
  2. Phone should show "Enter Special or Subsidy Code",
  3. Enter unlock code.
  4. Your phone is now unlocked.
WARNING: if any of these messages appear :
- "Contact Service Provider"
- or "Tamper Alter"
- or "Wait Before Enter Special Code"
- or "Contact Service'
It's because you or somebody else has already entered too many wrong codes. You just have to leave the phone ON on the error message and after 1hr - 8hrs the message "Enter Special Code" will appear again!
Note: If your phone is on a 3G network enter **057*, then another window will appear to enter the unlock code.

How to Enter Unlock Codes on all Motorola L6i & L7i:( not L6 and L7 without i )
  1. Press and hold "*" key by dialing code 787090
  2. The mobile displays: "Menu. Network"
  3. Choose 'yes' and then press OK
  4. The mobile ask you for code
  5. Enter the code for unlocking.
How to Enter Unlock Codes on all Motorola A1000 and other A models:
  1. Click on the icon Phone
  2. Enter the following keys: **057*
  3. Mobile displays "locking enter personalization"
  4. Enter the unlock code
  5. Click Ok

Feb 15, 2009 | Motorola Mobility RAZR V3

2 Answers

Need to unlock a Nokia 6103b


Unlock your phone
  • Press Menu, enter the lock code, then press OK.
Answering a call when the phone is locked
  • Press Answer.
To change the lock code of your phone
Your phone's lock code is used to lock and unlock your phone.
The default lock code is 1234.
  1. Use Menu 4-3-2-3 (Settings - Security settings - Access Codes - Change lock code) to change the lock code.
  2. When the phone requires the lock code, it displays "Enter lock code:".
  3. Enter the code, then press OK.
If you enter a wrong lock code five times in succession, your phone prompts you for the security code.
Saving the unlocked phone number

Use Menu 4-3-2-2 (Settings - Security - Settings - Unlocked phone number) to save a number that may be called even when your phone is locked. You will be required to enter the lock code.
  1. Calling the unlocked phone number.
  2. Press the Up or Down arrow keys or or manually enter the number exactly as it is saved, then press Call.
Note: The More key will pause the automatic scrolling of the help text. Pressing the More key or the Up or Down arrow keys will toggle through the pages. The More key is only displayed when the help text is displayed.

Jan 26, 2009 | Nokia 6103 Cellular Phone

Not finding what you are looking for?
Cell Phones Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cell Phones Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Marvin
Marvin

Level 3 Expert

83850 Answers

Brad Brown

Level 3 Expert

17805 Answers

Are you a Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...