# Web address was changed and now the cameras are no longer live on the new page

DCS1000 web cameras/ The new page only show 9 squares where the nine cameras should be viewed. We have had this system for 4 years and the only change was the web page address? Thanks Vicki

Posted by on

• Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that gotĀ 5 achievements.

Governor:

An expert whose answer gotĀ voted for 20 times.

Hot-Shot:

An expert who has answered 20 questions.

• Expert

Have you rebooted the system since you chaned the IP Address? are you behind a firewire that needs to allow the new IP?

Posted on Nov 26, 2007

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
Good luck!

Posted on Jan 02, 2017

×

my-video-file.mp4

×

## Related Questions:

### Whats signifecent about number nine

Don't really know what you are looking for here, but I will give it a shot;)

comes after 8
Comes before 10
Square root is 3
Factors are 1,3, and 9
Squared is 81

9 is also an interesting number because to see if 9 goes into a number evenly, you just add up the digits of the number and see if 9 goes into that number, 9 will go into the number evenly.

For example, to see if 7871847097401 is divisible by 9, let's add up the digits.

7+8+7+1+8+4+7+0+9+7+4+0+1=63 9 goes into 63 evenly, so 0 goes into 7871847097401 evenly. When you add up the digits and get 63, you can also add 6+3 to get 9 and 9 will go into 9 evenly, so 9 goes into 7871847097401 evenly.(p.s. The same process works for the number 3).

Good luck.

Paul

Mar 30, 2015 | Office Equipment & Supplies

### Linksys no longer appears on my laptop for some reason. how do i restore it. i can't go on line without it?

All Linksys routers have a built-in web-based setup page that allows the user to customize settings and set up advanced properties.

NOTE: Before accessing the router's web-based setup page, make sure the router is powered on and the computer is wired to one of the Ethernet ports on the router (1, 2, 3 or4 ).

Accessing the Router's Web-Based Setup Page

Step 1:
Open a web browser such as Internet Explorer.

Step 2:
Go to the Address bar and enter your router's IP address ("192.168.1.1" is the default IP of most Linksys routers) then press [Enter].

NOTE : For WRP400, the default IP address would be "192.168.15.1" and if you place the router behind a primary router with the IP address of "192.168.15.1", then the router will automatically assume a new default IP address, "192.168.16.1".

The router's IP address can be changed by:

1. Running the router's setup CD.

2. Changing it on the router's web-based setup page.

If you forgot the router's IP address you can:

2. Press the Reset button at the back of the router for 30 seconds.

NOTE
: This procedure will reset your router to factory defaults. Any settings on the router will be erased. The router's IP address will be "192.168.1.1" and the password will be "admin".

Step 3:
A new window will prompt for a User name and Password. Leave the User name field blank then enter your router's password ("admin" is the default password), then click OK.

Windows XP

Windows 7

NOTE:

The router's password can be changed by:

ii. Changing it on the router's web-based setup page. Click here to learn how to change password on the web-based setup page.

Unable to Access the Router's Web-Based Setup Page
Reset your router for 30 seconds. Try accessing again using the default IP address "192.168.1.1". If you are encountering problems accessing the router's web-based setup page, click here.

Related Articles:

Setting-Up WPA Wireless Security on a Linksys Router
Changing the Wireless Network's Name (SSID) on a Linksys Router
Setting-Up a Router with DSL Internet Service

Nov 08, 2010 | Linksys WRT160N Wireless Router

### Oops this link appears to be broken dns error - cannot find server windows 7 explorer 8

The error refers to the Domain Name Server (DNS) that your system uses is unable to translate the Uniform Resource Locator (URL, web address either Typed in the address line or linked using a hyper-link, favorite or default home page) (In english, the translation of a web address link www.google.com to the Internet Protocol (IP) address that computers actually use to show the page)
Possible causes:
1. The URL is wrong. (Typed wrong, link no longer active, link changed)
2. The DNS server listed for your ISP configuration is not working.
3. The web site is offline.
4. The DNS server settings for your internet configuration are wrong.
Possible resolutions:
1. Try a different Web Address, see if it works
2. Restart (Completely power off your Cable/DSL modem and then do the same with your router)
3. Check you IP address configuration settings and ensure that auto-assign DNS is selected (Default setting)
4. Boot to safe mode with networking, see if you can get online that way.

Dec 21, 2009 | Computers & Internet

### Everytime I turn on my camera it says : Turn the power off and on again. It flashed the error E or F 91:01.

It sounds like you have a FLASH FAIL error message on a Sony Cybershot.

This solution was provided by acem77 at agorarequestdotcom:

1st I ordered the service manual from http://servicemanuals.net/index.html
2nd I downloaded a RM95 emulator program. this program actslike/replaces the remote commander sony techs use to change settings.
http://stanza.techfocus.net/camera/rm95.zip in side the zip is the RM95EMUL.EXE and RM95DUMP.EXE
3rd I made the LanC Interface Cable on this web site http://www.hardwareanalysis.com/action/printarticle/1464
the steps above save you \$200 in service tools. The cable parts cost about \$12 the manual cost about \$30.
I can sell you a cd copy cheaper if you have the same camera.
when you are ready plug the cable you made into the (ext flash) or (lanC) port on the sony camera.
Put your camera in play mode and turn it on. Then start the RM95DUMP.EXE program in a dos prompt.
Type (RM95DUMP.EXE>factory.txt) this will save a copy of all the setting of the camera to your pc.
Now you did that run RM95EMUL.EXE.
You will need the service manual to know what settings to change.

I had to change these addresses to unlock page d with the flash error setting.
Set address to (reset all values to default after page d is changed and saved)
Page: 0 .address: 01,and set data: 01.
Page: 2 .address: 03,and set data: 00.
Page: 2 .address: 00,and set data: 2d.
Page: 2 .address: 01,and set data: 2d.
Page: 2 .address: 02,and set data: 01.

Cant change this setting until you change the above settings
Page: d .address: 67,and set data: 00 (if you have an error this will be 4 set it back to 0)
Write/save the new change to memory

Jul 16, 2009 | Sony Cyber-shot DSC-W70 Digital Camera

### I want to put my final draft on my new computer but I don't have my customer number, what can I do?

If you have the orginal invoice and.or know when it was purchased. You can give them your name and they will help you

You will new a key code to change your Final Draft to a new computer

• Chat Support
• http://www.finaldraft.com/support/chat.php
• Chat Support
Free* online live chat support, available 9:30am - 4:30pm PST, Mon-Fri.
• http://www.finaldraft.com/

• Good Luck
• Neon Lights Entertainment
Free* online live chat support, available 9:30am - 4:30pm PST, Mon-Fri.

• Jul 15, 2009 | Final Draft 7/ AV 2.0 (fd7/av2) for PC,...

### I need the the dlink dcs 1000 software to intall cam from scratch

Onthe next screen, scroll down MULTIMEDIA in the black strip and then under "Digital Video", select your camera model and
click on it.

Disconnect the Camera from the USB port and install the CD or Downloaded software program.

When the program asks you to connect the camera to the USB port, do so and it should work after
it completes the installation.

Then to use it on the Web, do this.

Web Camera's have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:
set it up as follows:
Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
Then click on the Video Settings.
The camera, if Installed Properly, it will come up and show a video picture.
Then, on the bottom of the page click save.
The camera and audio should function properly. Your friends and Family will now be able to see and hear you.

B. Yahoo Setup:
set it up as follows:
Go to Messenger at the top left and click on it.
Next go down to Preferences and click on it.
Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
Next go to the Test Audio section and (in blue writing) click on "Open the call setup assistant" and follow the instructions on the left window.

C. Windows Live Messenger:
After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
Then on the Windows Live messenger window on the right side, click on " "Show Menus." And then click on "Show the Menu Bar".
Next go to the Menu Bar on right side, click on " "Action."
Go to "TOOLS" and click "Audio and Video Setting" and follow the instructions.
NOTE: Your audio and video should work. Enjoy.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.

D. AIM (AOL) Messenger:
http://dashboard.aim.com/aim
On the VIM sign-in window, click on Edit.
Then click on Settings Enhanced IM.
Next click on Enhanced IM.
Then click on Audio Video.
The Audio and Video portion has drop downs so you can select the proper audio card and video camera installed in you computer.
The Audi Video drop downs are
Microphone
Speaker
Camera
The audio and camera should function now.
Additional information to use with VIM settings.
1. Click the Audio and Video Settings button directly below the My Buddy or My Camera window. If you are currently
Participating in an AOL Live Video IM session, a message will display: You must disconnect the current AOL Live Video IM
conversation before running setup. Would you like to disconnect now? Click the Yes button.
2. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working
Notes:
The first time you use AOL Live Video IM, a message will display: Would you like to first check your audio and video settings? Click the Yes button.
The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working properly.
images in AOL Live Video IM may appear reversed, or as a mirror image (text may appear backwards) when you look at your own camera feed or at the
Picture-in-picture (PIP) display.
After making the settings your ready for a chat and video talk with your Family and Friends. Hope this helps. Bud

Apr 19, 2009 | Computers & Internet

### My webcam is not working in yahoo messenger 9

Normal 0 See section C. Windows Live Messenger in the info below to setup the Audio & Video.
Also send this to your family and friends so they have there computer setup properly.
Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:

1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
2. Then click on the Video Settings.
3. The camera if Installed Properly will come up and show a video picture.
4. Then, on the bottom of the page click on Save.

The camera and audio should function properly. Your friends and Family will now be able to see and her to you.

C. Windows Live Messenger:

1. After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
2. Then on the Windows Live messenger window on the right side, click on “ “Show Menus.” And then click on “Show the Menu Bar”.
3. Next go to the Menu Bar on right side, click on “ “Action.”
4. Go to “TOOLS” and click “Audio and Video Setting” and follow the instructions.
NOTE: Your audio and video should work. Enjoy.

When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.
Hope this helps. Bud

Mar 29, 2009 | Computers & Internet

### I downloaded msn live messenger 2009 and have had nothing but problems with my mic. I have a HP pro camera with a built in mic. This was working fine with msn live 8.1. I have a brand new HP with Vista....

Normal 0 See section C. Windows Live Messenger in the info below to setup the Audio & Video.
Also send this to your family and friends so they have there computer setup properly.
Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:

1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
2. Then click on the Video Settings.
3. The camera if Installed Properly will come up and show a video picture.
4. Then, on the bottom of the page click on Save.

The camera and audio should function properly. Your friends and Family will now be able to see and her to you.

C. Windows Live Messenger:

1. After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
2. Then on the Windows Live messenger window on the right side, click on “ “Show Menus.” And then click on “Show the Menu Bar”.
3. Next go to the Menu Bar on right side, click on “ “Action.”
4. Go to “TOOLS” and click “Audio and Video Setting” and follow the instructions.
NOTE: Your audio and video should work. Enjoy.

When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.
Hope this helps. Bud

Mar 21, 2009 | Microsoft LifeCam VX-3000 Web Camera

### Windows Live Cam 3000

Normal 0 Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order for the Audio and Video to function properly.
A. Skype Setup:
1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
2. Then click on the Video Settings.
3. The camera if Installed Properly will come up and show a video picture.
4. Then, on the bottom of the page click on Save.
The camera and audio should function properly. Your friends and Family will now be able to see and her to you.
B. Yahoo Setup:
1. Go to Messenger at the top left and click on it.
2. Next go down to Preferences and click on it.
3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.
C. Windows Live Messenger:
1. After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
2. Then on the Windows Live messenger window on the right side, click on “ “Show Menus.” And then click on “Show the Menu Bar”.
3. Next go to the Menu Bar on right side, click on “ “Action.”
4. Go to “TOOLS” and click “Audio and Video Setting” and follow the instructions.
NOTE: You audio and video should work. Enjoy.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.
Hope this helps. Bud

Jan 29, 2009 | Microsoft LifeCam VX-3000 Web Camera

### I have just completed a total reinstall of My XP Pro and have downloaded My Windows Live Messenger and installed it succesfully. Hopwe4ver when I try to log on it is giving me the error message numbered...

you will have to setup you windows live on your hotmail first

1. Visit the following Web page, and then click Forgot Your Password?: http://login.live.com (http://login.live.com) 2. Type your Windows Live ID, type the characters that appear in the Picture box, and then click Continue. 3. Click Send yourself a password reset e-mail message. 4. Click Send Message. 5. On the confirmation page, click Done. 6. Sign in to your e-mail account, and then click the link in the e-mail message to reset your password. 7. On the Confirm your e-mail address page, type your e-mail address, and then click Continue. 8. Type your new password two times, and then click Continue. 9. If you want to enter an "alternate" e-mail address, type the address two times, and then click Continue.

If you do not want to enter an "alternate" e-mail address, click Skip. 10. When you receive the "You've changed your password" message, click Done.For more information about Windows Live ID services, visit the following Windows Live ID Web site: http://get.live.com/getlive/overview

Aug 21, 2008 | Computers & Internet

## Open Questions:

#### Related Topics:

55 people viewed this question

#### Top Computers & Internet Experts

##### Doctor PC

Level 3 Expert

##### kakima

Level 3 Expert